STM32L4P5VET6 - 120MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
MPN: STM32L4P5VET6 ✓ AktifSTM32L4P5VET6 Genel Bakış
An ultra-low-power microcontroller is an integrated semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one device. The STM32L4+ family belongs to the Arm Cortex-M4 microcontroller hierarchy and targets applications where responsive real-time processing must coexist with low standby current, efficient active-mode operation, and compact embedded control.
The STM32L4P5VET6 provides a 120 MHz Arm Cortex-M4 core, 32-bit architecture, and 512 KB of Flash for firmware and application code. Its 100-pin LQFP package supports a broad peripheral complement for sensor acquisition, communications, human-machine interfaces, and connected industrial equipment. The listed feature set includes USB OTG and DFSDM, while the 12-bit ADC and DAC resources support precision measurement and signal generation.
The high-performance Cortex-M4 architecture uses a reduced instruction set and includes floating-point capability for efficient digital signal processing and control-loop calculations. USB OTG supports direct USB connectivity for configuration, data transfer, and peripheral interfacing, while DFSDM provides a dedicated path for high-rate digital signal acquisition from external converters. These integrated functions reduce reliance on external interface devices in compact designs.
Typical applications include industrial sensor hubs, building automation controllers, USB-connected data-acquisition systems, portable medical or test equipment, low-power edge nodes, and compact motor-control or measurement products. The combination of 512 KB Flash, USB connectivity, and 120 MHz processing is particularly useful when local control logic, communications, and signal processing must share one microcontroller.
PCB design should preserve clean separation between analog and digital signals, route high-speed or USB interfaces with controlled impedance, and place decoupling capacitors close to the supply pins. Firmware must also be validated against the device pin definitions and peripheral requirements in the manufacturer datasheet before PCB routing or production release.
This page combines device specifications, practical application guidance, and engineering-focused comparisons to support MCU selection, schematic review, PCB planning, and sourcing decisions for the STM32L4P5VET6.
Drop-in alternatifler için STM32L4P5VET6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller STM32L4P5VET6 (aynı form faktörü ve ayağa oturma) — farklı olan ADC Resolution, Package, Processor Core, Product Type.
STM32L451VET6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L452VET6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L462VET6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L471VET6
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →STM32L475VET6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L4P5VET6 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Manufacturer | STMicroelectronics |
| Product Type | 32-bit ARM Cortex-M4 ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 120 MHz |
| Architecture | 32-bit RISC |
| Embedded Flash Memory | 512 KB (512K x 8) |
| İşletim Besleme Gerilimi | 3.3 V |
| USB Interface | USB OTG |
| Digital Filter for Sigma-Delta Modulators | DFSDM |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| Paket | 100-pin LQFP (14 mm x 14 mm) |
| Montaj Türü | Surface mount |
STM32L4P5VET6 100-pin lqfp (14 mm x 14 mm) Pin Yapısı Kılavuzu
STM32L4P5VET6 (100-pin lqfp (14 mm x 14 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: STM32L4P5VET6.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
STM32L4P5VET6 için uygundur 6 uygulamas: USB Sensor Hub, Industrial Data Acquisition, Building Automation Controller, Portable Medical Monitor, Low-Power Edge Sensor Node, Test and Measurement Instrument.
USB Sensor Hub
The STM32L4P5VET6 fits a USB sensor hub because its 120 MHz Arm Cortex-M4 core can process multiple sensor streams while USB OTG provides a direct device interface. The 512 KB Flash capacity accommodates firmware, configuration data, and device-management code without requiring a separate program-memory device. A practical implementation uses the USB interface for command and data traffic while DFSDM can accept suitable digital sensor streams. Designers should account for connector protection, controlled-impedance USB routing, solid grounding, and firmware scheduling so high-rate transfers do not delay control functions.
Industrial Data Acquisition
The STM32L4P5VET6 is well suited to industrial data-acquisition equipment requiring 12-bit conversion resources, a 120 MHz processing core, and 512 KB of local Flash. Its 100-pin LQFP interface can support analog inputs, digital sensing, communications, and local storage in one controller. DFSDM can provide a dedicated digital acquisition path when the sensor or converter uses a compatible sigma-delta interface. The principal design consideration is maintaining clean analog and digital partitioning while minimizing conversion, reference, and switching-noise errors that can dominate measurement accuracy.
Building Automation Controller
The STM32L4P5VET6 can serve as a building-automation controller where energy management, environmental sensing, and communications must share a compact embedded platform. Its 120 MHz Cortex-M4 core provides headroom for protocol handling and real-time control, while 512 KB of Flash supports application firmware and local configuration. The 100-pin LQFP package offers extensive routing options for serial interfaces, digital inputs, and analog sensing. Firmware should use a deterministic scheduling approach, and PCB layout should isolate sensor inputs and communication interfaces from switching regulators and high-current actuator outputs.
Portable Medical Monitor
The STM32L4P5VET6 is applicable to portable monitoring equipment that combines sensor conditioning, digital processing, USB connectivity, and a compact display interface. Its 120 MHz Cortex-M4 core supports filtering and real-time analysis, and its 512 KB Flash provides room for embedded firmware and parameter sets. USB OTG enables configuration, logging, or synchronization with a host device. For a medical product, the developer must also define signal isolation, patient protection, electrical-safety boundaries, calibration, and regulatory validation independently of the MCU selection.
Low-Power Edge Sensor Node
The STM32L4P5VET6 fits an edge sensor node that must process local measurements while minimizing energy use. Its ultra-low-power STM32L4+ architecture supports duty-cycled sensing and communications, and the 120 MHz core allows time-critical filtering to run without moving every calculation to a higher-power host. The 512 KB Flash supports protocol handlers, event logic, and update-capable firmware. Real deployment should validate sleep-mode current, wake-up latency, analog-front-end noise, and regulator efficiency across the complete environmental test range.
Test and Measurement Instrument
The STM32L4P5VET6 is appropriate for compact test and measurement products that combine fast acquisition, local processing, and USB connectivity. Its 120 MHz Cortex-M4 core can execute digital filtering, calibration routines, and instrument-control logic, while DFSDM supports compatible high-resolution acquisition stages and 12-bit converters support direct analog measurement. The 100-pin LQFP package leaves access to programming and communication interfaces while keeping the device easy to assemble. Calibration tables, reference design, analog-layout discipline, and traceable firmware updates remain essential to measurement quality.
Mühendislik referans verileri: STM32L4P5VET6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | STM32L451VET6 | STM32L452VET6 | STM32L462VET6 | STM32L471VET6 | STM32L475VET6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-pin LQFP (14 mm x 14 mm) | 100-pin LQFP (14 mm x 14 mm) | 100-pin LQFP (14 mm x 14 mm) | 100-pin LQFP (14 mm x 14 mm) | 100-pin LQFP (14 mm x 14 mm) | 100-pin LQFP (14 mm x 14 mm) |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 120 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Embedded Flash Memory | 512 KB (512K x 8) | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| USB Interface | USB OTG | USB device capability | USB OTG | USB OTG | USB OTG | USB OTG |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| DAC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
Ana Farklılayıcılar
- Higher processing ceiling within the compared STM32L4 100-pin options (karşılaştırma:STM32L452VET6)
- USB and DFSDM integration for connected acquisition systems (karşılaştırma:STM32L451VET6)
- 512 KB Flash with a 120 MHz Cortex-M4 core (karşılaştırma:STM32L471VET6)
- Performance headroom for local filtering and control (karşılaştırma:STM32L475VET6)
Tasarım Notları
Route USB and other high-speed interfaces as controlled-impedance nets with a continuous reference plane and minimized branch lengths. Keep the USB connector, protection devices, and MCU-side routing in one defined signal region. Avoid placing switching-regulator power paths beneath USB data lines, because inductors and discontinuous current loops can increase radiated emissions and compromise signal integrity.
Do not treat an STM32L4 family pin compatibility claim as a complete replacement qualification. Before substituting the STM32L4P5VET6 with STM32L451VET6, STM32L452VET6, STM32L462VET6, STM32L471VET6, or STM32L475VET6, verify boot configuration, oscillator pins, debug connections, analog functions, communication peripherals, interrupt assignments, and the maximum clock required by the application. A footprint match alone does not guarantee identical firmware behavior.
Place every required decoupling capacitor close to the corresponding power and ground pins, following the capacitor values and network shown in the manufacturer datasheet. Provide adequate bulk charge near the MCU and keep high-current return paths away from sensitive analog inputs. Verify startup voltage, internal-regulator configuration, and the relationship between clock frequency and current draw across the intended temperature range.
Separate analog inputs from digital clocks and switching nodes, and use a continuous ground reference beneath sensitive routes. DFSDM and USB interfaces need short, symmetric connections to their source devices, while ADC inputs may require filtering that interacts with acquisition time and bandwidth. Validate crosstalk, converter reference noise, and sampling timing in hardware rather than relying only on nominal peripheral ratings.
Uyumluluk Bilgisi
Compliance status was not stated in the product information available for this device. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the manufacturer product page or applicable declaration documents.