Microchip Technology

SY89112UMG - 3GHz 2:12 Clock Buffer | Microchip Technology

Артикул: SY89112UMG ✓ Активен
2.375 V to 3.6 V Vdss 44-VFQFN exposed pad Package 3 GHz Speed
MOQ: 1 |

SY89112UMG Обзор

The Microchip Technology SY89112UMG is a 2:12 clock fanout buffer and multiplexer with a maximum operating frequency of 3 GHz, supplied in a 44-VFQFN exposed-pad package with a 7 mm by 7 mm surface-mount footprint. It belongs to the Precision Edge family of clock and timing devices.

A clock fanout buffer is a clock-and-timing IC that receives one or more high-speed clock signals and reproduces them across multiple outputs. Its position in the hierarchy is clock buffer and fanout driver, then clock distribution device, then clock and timing IC. By consolidating clock distribution into one device, the SY89112UMG can reduce duplication in systems where a source clock must reach several serializers, transceivers, processors, or data-conversion circuits.

The principal feature of the SY89112UMG is its 2:12 fanout ratio, supported by a 3 GHz operating frequency. The device accepts input signals compatible with CML, LVDS, and LVPECL interfaces, making it suitable for systems that distribute high-speed differential clock signals between integrated circuits. Its core supply operating range is 2.375 V to 3.6 V, while its specified operating temperature range is -40 degrees Celsius to 85 degrees Celsius.

The 44-MLF package uses an exposed pad for surface mounting and heat removal. This arrangement supports compact layouts in telecommunications, networking, and high-speed computing equipment. Because the device operates at multi-gigahertz rates, controlled impedance routing, short clock traces, and a low-noise supply connection are central to achieving reliable signal integrity.

Typical uses include 1G network-interface clock distribution, backplane clock fanout, high-speed computing clock trees, and clock routing into communications transceivers. The SY89112UMG is especially relevant where one differential clock source must feed multiple downstream circuits without duplicating output-driver circuitry across the board.

Designers should treat the exposed pad as a thermal and electrical connection, follow the manufacturer pin-assignment table when routing inputs, outputs, supply, and ground, and maintain the specified supply range. PCB placement should minimize the distance between clock outputs and their receiving circuits so that edge degradation from board loss and crosstalk remains under control.

This page organizes the device specifications, interface capabilities, application fit, package constraints, and engineering considerations in one reference. It also separates confirmed device data from unknown values and identifies where a manufacturer datasheet or direct engineering confirmation is required before layout release or production sourcing.

Аналоги без доработки для SY89112UMG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с SY89112UMG (тот же форм-фактор и посадочное место) — отличается по Fanout Ratio, Product Type.

Microchip Technology
Fanout Ratio: 1:12
Product Type: LVPECL clock fanout buffer with 2:1 input multiplexer
Сравнить с SY89112UMG →

Для этого товара нет аналогов без доработки.

Запросить аналоги

SY89112UMG Характеристики

Product Type Clock fanout buffer and multiplexer
Fanout Ratio 2:12
Maximum Operating Frequency 3 GHz
Input Logic Compatibility CML, LVDS, and LVPECL
Operating Supply Voltage Range 2.375 V to 3.6 V
Диапазон рабочих температур -40 degrees Celsius to 85 degrees Celsius
Package Type 44-VFQFN exposed pad
Package Designation 44-MLF
Package Dimensions 7 mm x 7 mm
Тип монтажа Surface mount
Product Series Precision Edge
Primary Application High-speed clock distribution
Application Domains Telecommunications, networking, and high-speed computing
Exposed Thermal Pad Present
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

Руководство по цоколевке SY89112UMG в корпусе 7 mm x 7 mm

Цоколевка для SY89112UMG (корпус 7 mm x 7 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 7 mm x 7 mm для SY89112UMG

Нет подробных данных о распиновке для SY89112UMG.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

SY89112UMG подходит для 6 применениеs: 1G Network-Interface Clock Distribution, Telecommunications Backplane Clock Fanout, High-Speed Computing Clock Trees, High-Speed Serial Transceiver Clocking, Data-Center Network Interface Cards, Clock Distribution for Test and Measurement Systems.

🌐

1G Network-Interface Clock Distribution

The SY89112UMG suits network-interface boards that must distribute a high-speed differential clock to multiple serializer or transceiver sections. Its 2:12 fanout ratio provides twelve outputs from two input sources, and the 3 GHz operating frequency offers ample headroom for 1G-class clock architectures. CML, LVDS, and LVPECL-compatible inputs allow the device to fit existing high-speed interface conventions. Place the device near the clock-consuming circuits, use controlled-impedance routing for differential pairs, and connect the exposed pad to the ground plane with thermal vias. This arrangement limits trace loss and crosstalk while avoiding a separate output-driver stage for each destination.

📡

Telecommunications Backplane Clock Fanout

The SY89112UMG is appropriate for telecommunications backplanes where a common reference clock must reach multiple line cards or transceiver channels. The 2:12 ratio allows twelve low-fanout branches from two inputs, while the 3 GHz specification supports high-speed clock distribution close to the active electronics. Differential CML, LVDS, and LVPECL-compatible signaling helps preserve signal integrity over controlled-impedance board traces. Keep output traces short, avoid crossing clock nets with high-energy data paths, and provide a continuous reference plane beneath the routing. The 44-VFQFN exposed pad also supports efficient heat removal when multiple outputs operate continuously.

🖥️

High-Speed Computing Clock Trees

The SY89112UMG can serve as a local clock-tree node in high-speed computing and processing systems where one or two clock sources feed several internal interfaces. Its twelve outputs reduce the number of discrete fanout drivers required near the load circuits, and the 3 GHz operating frequency provides useful margin above many processor-interface clock rates. The device is particularly useful where CML, LVDS, or LVPECL-compatible clocks are already present. Position the buffer close to the receiver group, match differential trace lengths where required by the interface standard, and keep the supply return path continuous. Validate the complete eye and jitter budget at system level because buffer and routing losses combine.

🔗

High-Speed Serial Transceiver Clocking

The SY89112UMG fits boards that feed several high-speed serial transceivers from a common low-jitter differential clock. Its 2:12 fanout configuration allows multiple links to receive independently routed clock branches without adding separate buffer stages, and the 3 GHz bandwidth supports modern high-speed serial interfaces. Compatibility with CML, LVDS, and LVPECL input conventions simplifies integration with existing clock-generation circuitry. Route each output as a controlled-impedance differential pair, keep the buffer close to the transceiver bank, and avoid sharing clock traces with noisy digital return paths. The exposed pad should use the manufacturer-recommended via pattern to maintain electrical return and thermal performance.

🖥️

Data-Center Network Interface Cards

The SY89112UMG is a useful clock-distribution element on data-center interface cards where multiple ports, transceivers, or fabric links need a locally distributed clock. The 2:12 fanout ratio supports a compact clock tree, while the 3 GHz operating frequency accommodates high-speed link clocking and provides margin above typical reference-clock frequencies. The 44-VFQFN package supports dense multilayer PCB layouts, and its exposed pad provides a low-impedance return and thermal path. Place the fanout buffer upstream of the transceiver cluster while keeping individual clock branches short and matched. Validate insertion loss, jitter, and crosstalk against the receiver specifications for every supported link rate and data pattern.

📟

Clock Distribution for Test and Measurement Systems

The SY89112UMG can distribute a high-speed reference clock across multiple measurement, conversion, or pattern-generation sections within an instrument. Its twelve outputs reduce the need for repeated downstream buffering and support simultaneous clocking of independent subsystems. The 3 GHz operating frequency is suitable for instrumentation that uses CML, LVDS, or LVPECL-compatible internal clock signals, while the 2.375 V to 3.6 V supply range fits conventional low-voltage logic systems. Use symmetrical routing to minimize skew between channels and keep the device near the clock-consuming analog and digital sections. Confirm output amplitude, jitter, and termination requirements from the manufacturer electrical-characteristics tables before finalizing the analog path.

What is the SY89112UMG?
The SY89112UMG is a Microchip Technology Precision Edge clock fanout buffer and multiplexer with a 2:12 fanout ratio and a maximum operating frequency of 3 GHz. It accepts CML, LVDS, and LVPECL-compatible input signals and is supplied in a 44-VFQFN exposed-pad package. The device is intended for high-speed clock distribution in telecommunications, networking, and computing systems.
What are the key specifications of SY89112UMG that engineers should know?
The SY89112UMG combines a 2:12 fanout ratio, 3 GHz maximum operating frequency, and support for CML, LVDS, and LVPECL-compatible inputs. Its operating supply range is 2.375 V to 3.6 V, its temperature range is -40 degrees Celsius to 85 degrees Celsius, and its package is a 44-MLF 7 mm by 7 mm VFQFN with an exposed pad. These characteristics make it a multi-output high-speed clock-distribution device.
Where can I download the SY89112UMG datasheet PDF?
The SY89112UMG datasheet can be opened through the Microchip Technology document linked on this page, which identifies the part as a 2:12, 3 GHz clock fanout buffer and multiplexer in a 44-MLF exposed-pad package. Use the manufacturer pin-description and electrical-characteristics tables when assigning signals, selecting termination, and laying out the 44-VFQFN footprint.
Where is the SY89112UMG pinout located?
The SY89112UMG pin assignment is defined by the manufacturer datasheet rather than the distributor listing. Because the device uses a 44-VFQFN exposed-pad package, the layout must also include the exposed thermal and electrical pad shown in the package drawing. Use the pin-description table when routing the two inputs, twelve outputs, supply, ground, and configuration pins.
What is the operating voltage of SY89112UMG?
The SY89112UMG operates from 2.375 V to 3.6 V. This supply range applies to the device's core operating supply, while the CML, LVDS, and LVPECL-compatible clock interfaces are configured separately according to the manufacturer application guidance. Confirm the exact interface termination and supply arrangement against the datasheet before committing a board layout.
Where can I buy SY89112UMG online?
Use the Request a Quote form on this page to request SY89112UMG sourcing from XAIPART. The form allows you to specify the required quantity, package format, target date, and any lot or traceability requirements. Current commercial terms are confirmed through that request rather than through static text on the product page.
What is the price of SY89112UMG?
Request current SY89112UMG pricing through the Request a Quote form on this page. Because pricing depends on quantity, packaging format, market conditions, and supply availability, use the form to obtain a response matched to your production requirement. The same workflow can be used to request volume-break information and delivery scheduling.
What is the lead time for SY89112UMG?
The current lead time should be confirmed through the Request a Quote form on this page. Submit the required quantity, date code preference, and target delivery date so the sourcing team can confirm available supply. For schedule-sensitive programs, include the required ship date and any acceptable alternate package formats in the request.
Is SY89112UMG in stock?
Request real-time SY89112UMG availability through the Request a Quote form on this page. The form provides the clearest path to confirm current stock, production allocation, and the expected lead time for your quantity. Specify whether you require the standard package or a tape-and-reel shipping format when submitting the request.
What can replace SY89112UMG?
A valid replacement must match the 44-VFQFN footprint, preserve pin-to-pin signal assignments, and provide equivalent clock bandwidth and interface compatibility. Do not assume that another fanout ratio or another logic family is interchangeable even if the package dimensions match. Submit the SY89112UMG pin list, clock topology, and interface requirements with your replacement request for engineering confirmation.
Is there a Microchip Technology equivalent for SY89112UMG?
The Microchip Technology cross-reference search is the appropriate tool for identifying a related Precision Edge device, but a listing alone does not prove drop-in compatibility. Confirm that any candidate uses the same 44-VFQFN footprint, matches the 2:12 fanout requirement, supports 3 GHz operation, and presents the same CML, LVDS, or LVPECL interface arrangement.
When should I choose SY89112UMG over another clock buffer?
Choose the SY89112UMG when the design needs twelve clock outputs from two input sources at rates up to 3 GHz in a 44-VFQFN exposed-pad package. It is a strong fit for networking, telecommunications, and high-speed computing boards that already use CML, LVDS, or LVPECL clocking. Choose another device only if its footprint, pin mapping, fanout, and edge-rate performance match the complete clock architecture.
Is SY89112UMG suitable for telecommunications and networking equipment?
Yes, the SY89112UMG is specifically positioned for telecommunications, networking, and high-speed computing systems. Its 2:12 fanout ratio supports multi-branch clock distribution, while the 3 GHz operating frequency and support for CML, LVDS, and LVPECL-compatible inputs suit high-speed serial links. Board-level signal integrity still requires controlled-impedance routing and correct interface termination.
What is the best cross-brand equivalent for SY89112UMG?
A cross-brand equivalent must be selected from an engineer-reviewed cross-reference result rather than from package similarity alone. Confirm the 44-VFQFN footprint, pin-to-pin compatibility, 2:12 fanout behavior, 3 GHz bandwidth, supply range, and CML, LVDS, or LVPECL interface requirements. Provide those constraints in the Request a Quote form when requesting a drop-in replacement review.
Does the SY89112UMG need a heatsink?
The SY89112UMG uses a 44-VFQFN exposed pad that provides a thermal and electrical path into the PCB. Thermal requirements depend on supply voltage, I/O activity, airflow, and board copper, so the exposed pad should be connected to a solid ground plane with multiple thermal vias where the recommended layout pattern is used. Determine whether a heatsink is necessary from measured junction and board temperatures in the finished system.

Справочные инженерные данные для SY89112UMG — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the SY89112UMG when a board needs a compact, 3 GHz-capable clock fanout stage with twelve outputs generated from two inputs. It is well matched to telecommunications, networking, and high-speed computing designs already using CML, LVDS, or LVPECL-compatible clocks. The 44-VFQFN exposed-pad package supports dense layouts, but it also demands careful via placement, a solid ground reference, and controlled-impedance clock routing.

Do not select a substitute solely because another device has twelve outputs or the same nominal package dimensions. A genuine drop-in candidate must match the footprint, pin mapping, fanout behavior, clock bandwidth, supply range, interface levels, and output specifications. The tube-packaged ordering code should not be treated as an engineering alternative, and the tape-and-reel order code represents a shipping format rather than a different device. When the requirements include a different fanout ratio, single-ended clocking, lower supply voltage, or a non-exposed-pad footprint, evaluate a different device family rather than assuming compatibility.

Сравнение с аналогами

Параметр Этот товар
Brand Microchip Technology
Package 44-VFQFN exposed pad, 44-MLF, 7 mm x 7 mm
Product Type Clock fanout buffer and multiplexer
Fanout Ratio 2:12
Maximum Operating Frequency 3 GHz
Input Logic Compatibility CML, LVDS, and LVPECL
Operating Supply Voltage Range 2.375 V to 3.6 V
Operating Temperature Range -40 degrees Celsius to 85 degrees Celsius
Mounting Type Surface mount
Product Series Precision Edge

Ключевые отличия

  • High fanout from two clock sources (против Single-output or lower-ratio clock buffers)
  • Multi-gigahertz multi-output operation (против Lower-frequency general-purpose fanout buffers)
  • Support for three high-speed logic conventions (против Buffers limited to a single CML, LVDS, or LVPECL interface family)
  • Compact exposed-pad surface-mount package (против Larger leaded or non-exposed-pad clock buffers)

Заметки по проектированию

Place the SY89112UMG close to the clock-consuming circuits and keep each differential clock route as short as practical. Use the manufacturer reference layout for input and output pairing, and maintain a continuous reference plane beneath the routed pairs. Because the device supports CML, LVDS, and LVPECL-compatible signals, the required termination and voltage conventions must match the selected interface on both the input and output networks.

Connect the 44-VFQFN exposed pad to the ground plane with the recommended thermal-via pattern rather than leaving it isolated. The exposed pad provides both a low-impedance return path and a heat-removal route. Estimated thermal performance depends on copper area, via count, airflow, and dissipation, so evaluate junction temperature from the finished-board thermal model or measurement instead of assuming that the package alone limits temperature rise.

Validate the complete clock path with insertion-loss, jitter, and crosstalk measurements. The 3 GHz device rating does not guarantee acceptable eye closure at every receiver because package, connector, via, and PCB transitions contribute loss. Match differential pair geometry, avoid stubs, maintain return-path continuity through layer changes, and use the datasheet output and input compliance data when setting amplitude, common-mode voltage, and termination.

Decouple the supply pins with the capacitance and placement recommended by the manufacturer, and route the connection to a quiet supply node without shared high-current paths. The specified operating supply range is 2.375 V to 3.6 V; operation outside that range requires separate engineering evaluation. Keep sensitive clock inputs away from switching-node return currents and noisy processor power paths to limit supply-induced jitter on distributed clocks.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Environmental and automotive compliance declarations are not stated in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with Microchip Technology before qualification.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

SY89112UMG datasheet SY89112UMG datasheet pdf SY89112UMG pinout SY89112UMG equivalent SY89112UMG drop-in replacement SY89112UMG cross reference SY89112UMG 3GHz 2:12 clock buffer SY89112UMG 44-VFQFN footprint Microchip Technology SY89112UMG SY89112UMG price SY89112UMG stock SY89112UMG CML LVDS LVPECL SY89112UMG networking clock distribution

Связанные компоненты & термины

Microchip Technology SY89112UMG Precision Edge clock fanout buffer clock multiplexer clock distribution device clock and timing IC 2:12 fanout 3 GHz clock CML LVDS LVPECL 44-VFQFN 44-MLF exposed pad 7 mm by 7 mm package surface mount 2.375 V to 3.6 V supply -40 degrees Celsius to 85 degrees Celsius telecommunications clocking network interface clock distribution high-speed computing differential clock routing controlled impedance
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ