SY89112UMG - 3GHz 2:12 Clock Buffer | Microchip Technology
N.º da peça: SY89112UMG ✓ AtivoSY89112UMG Visão geral
A clock fanout buffer is a clock-and-timing IC that receives one or more high-speed clock signals and reproduces them across multiple outputs. Its position in the hierarchy is clock buffer and fanout driver, then clock distribution device, then clock and timing IC. By consolidating clock distribution into one device, the SY89112UMG can reduce duplication in systems where a source clock must reach several serializers, transceivers, processors, or data-conversion circuits.
The principal feature of the SY89112UMG is its 2:12 fanout ratio, supported by a 3 GHz operating frequency. The device accepts input signals compatible with CML, LVDS, and LVPECL interfaces, making it suitable for systems that distribute high-speed differential clock signals between integrated circuits. Its core supply operating range is 2.375 V to 3.6 V, while its specified operating temperature range is -40 degrees Celsius to 85 degrees Celsius.
The 44-MLF package uses an exposed pad for surface mounting and heat removal. This arrangement supports compact layouts in telecommunications, networking, and high-speed computing equipment. Because the device operates at multi-gigahertz rates, controlled impedance routing, short clock traces, and a low-noise supply connection are central to achieving reliable signal integrity.
Typical uses include 1G network-interface clock distribution, backplane clock fanout, high-speed computing clock trees, and clock routing into communications transceivers. The SY89112UMG is especially relevant where one differential clock source must feed multiple downstream circuits without duplicating output-driver circuitry across the board.
Designers should treat the exposed pad as a thermal and electrical connection, follow the manufacturer pin-assignment table when routing inputs, outputs, supply, and ground, and maintain the specified supply range. PCB placement should minimize the distance between clock outputs and their receiving circuits so that edge degradation from board loss and crosstalk remains under control.
This page organizes the device specifications, interface capabilities, application fit, package constraints, and engineering considerations in one reference. It also separates confirmed device data from unknown values and identifies where a manufacturer datasheet or direct engineering confirmation is required before layout release or production sourcing.
Alternativas drop-in para SY89112UMG — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com SY89112UMG (mesmo formato e footprint) — diferindo em Fanout Ratio, Product Type.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasSY89112UMG Especificações
| Product Type | Clock fanout buffer and multiplexer |
| Fanout Ratio | 2:12 |
| Maximum Operating Frequency | 3 GHz |
| Input Logic Compatibility | CML, LVDS, and LVPECL |
| Operating Supply Voltage Range | 2.375 V to 3.6 V |
| Faixa de temperatura de operação | -40 degrees Celsius to 85 degrees Celsius |
| Package Type | 44-VFQFN exposed pad |
| Package Designation | 44-MLF |
| Package Dimensions | 7 mm x 7 mm |
| Tipo de montagem | Surface mount |
| Product Series | Precision Edge |
| Primary Application | High-speed clock distribution |
| Application Domains | Telecommunications, networking, and high-speed computing |
| Exposed Thermal Pad | Present |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
Guia de Configuração de Pinos do SY89112UMG 7 mm x 7 mm
Configuração de pinos para SY89112UMG (pacote 7 mm x 7 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para SY89112UMG.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
SY89112UMG é adequado para 6 aplicaçãos: 1G Network-Interface Clock Distribution, Telecommunications Backplane Clock Fanout, High-Speed Computing Clock Trees, High-Speed Serial Transceiver Clocking, Data-Center Network Interface Cards, Clock Distribution for Test and Measurement Systems.
1G Network-Interface Clock Distribution
The SY89112UMG suits network-interface boards that must distribute a high-speed differential clock to multiple serializer or transceiver sections. Its 2:12 fanout ratio provides twelve outputs from two input sources, and the 3 GHz operating frequency offers ample headroom for 1G-class clock architectures. CML, LVDS, and LVPECL-compatible inputs allow the device to fit existing high-speed interface conventions. Place the device near the clock-consuming circuits, use controlled-impedance routing for differential pairs, and connect the exposed pad to the ground plane with thermal vias. This arrangement limits trace loss and crosstalk while avoiding a separate output-driver stage for each destination.
Recomendado
Telecommunications Backplane Clock Fanout
The SY89112UMG is appropriate for telecommunications backplanes where a common reference clock must reach multiple line cards or transceiver channels. The 2:12 ratio allows twelve low-fanout branches from two inputs, while the 3 GHz specification supports high-speed clock distribution close to the active electronics. Differential CML, LVDS, and LVPECL-compatible signaling helps preserve signal integrity over controlled-impedance board traces. Keep output traces short, avoid crossing clock nets with high-energy data paths, and provide a continuous reference plane beneath the routing. The 44-VFQFN exposed pad also supports efficient heat removal when multiple outputs operate continuously.
Recomendado
High-Speed Computing Clock Trees
The SY89112UMG can serve as a local clock-tree node in high-speed computing and processing systems where one or two clock sources feed several internal interfaces. Its twelve outputs reduce the number of discrete fanout drivers required near the load circuits, and the 3 GHz operating frequency provides useful margin above many processor-interface clock rates. The device is particularly useful where CML, LVDS, or LVPECL-compatible clocks are already present. Position the buffer close to the receiver group, match differential trace lengths where required by the interface standard, and keep the supply return path continuous. Validate the complete eye and jitter budget at system level because buffer and routing losses combine.
Recomendado
High-Speed Serial Transceiver Clocking
The SY89112UMG fits boards that feed several high-speed serial transceivers from a common low-jitter differential clock. Its 2:12 fanout configuration allows multiple links to receive independently routed clock branches without adding separate buffer stages, and the 3 GHz bandwidth supports modern high-speed serial interfaces. Compatibility with CML, LVDS, and LVPECL input conventions simplifies integration with existing clock-generation circuitry. Route each output as a controlled-impedance differential pair, keep the buffer close to the transceiver bank, and avoid sharing clock traces with noisy digital return paths. The exposed pad should use the manufacturer-recommended via pattern to maintain electrical return and thermal performance.
Recomendado
Data-Center Network Interface Cards
The SY89112UMG is a useful clock-distribution element on data-center interface cards where multiple ports, transceivers, or fabric links need a locally distributed clock. The 2:12 fanout ratio supports a compact clock tree, while the 3 GHz operating frequency accommodates high-speed link clocking and provides margin above typical reference-clock frequencies. The 44-VFQFN package supports dense multilayer PCB layouts, and its exposed pad provides a low-impedance return and thermal path. Place the fanout buffer upstream of the transceiver cluster while keeping individual clock branches short and matched. Validate insertion loss, jitter, and crosstalk against the receiver specifications for every supported link rate and data pattern.
Recomendado
Clock Distribution for Test and Measurement Systems
The SY89112UMG can distribute a high-speed reference clock across multiple measurement, conversion, or pattern-generation sections within an instrument. Its twelve outputs reduce the need for repeated downstream buffering and support simultaneous clocking of independent subsystems. The 3 GHz operating frequency is suitable for instrumentation that uses CML, LVDS, or LVPECL-compatible internal clock signals, while the 2.375 V to 3.6 V supply range fits conventional low-voltage logic systems. Use symmetrical routing to minimize skew between channels and keep the device near the clock-consuming analog and digital sections. Confirm output amplitude, jitter, and termination requirements from the manufacturer electrical-characteristics tables before finalizing the analog path.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SY89112UMG — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Do not select a substitute solely because another device has twelve outputs or the same nominal package dimensions. A genuine drop-in candidate must match the footprint, pin mapping, fanout behavior, clock bandwidth, supply range, interface levels, and output specifications. The tube-packaged ordering code should not be treated as an engineering alternative, and the tape-and-reel order code represents a shipping format rather than a different device. When the requirements include a different fanout ratio, single-ended clocking, lower supply voltage, or a non-exposed-pad footprint, evaluate a different device family rather than assuming compatibility.
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | Microchip Technology |
| Package | 44-VFQFN exposed pad, 44-MLF, 7 mm x 7 mm |
| Product Type | Clock fanout buffer and multiplexer |
| Fanout Ratio | 2:12 |
| Maximum Operating Frequency | 3 GHz |
| Input Logic Compatibility | CML, LVDS, and LVPECL |
| Operating Supply Voltage Range | 2.375 V to 3.6 V |
| Operating Temperature Range | -40 degrees Celsius to 85 degrees Celsius |
| Mounting Type | Surface mount |
| Product Series | Precision Edge |
Principais diferenciais
- High fanout from two clock sources (vs Single-output or lower-ratio clock buffers)
- Multi-gigahertz multi-output operation (vs Lower-frequency general-purpose fanout buffers)
- Support for three high-speed logic conventions (vs Buffers limited to a single CML, LVDS, or LVPECL interface family)
- Compact exposed-pad surface-mount package (vs Larger leaded or non-exposed-pad clock buffers)
Notas de projeto
Place the SY89112UMG close to the clock-consuming circuits and keep each differential clock route as short as practical. Use the manufacturer reference layout for input and output pairing, and maintain a continuous reference plane beneath the routed pairs. Because the device supports CML, LVDS, and LVPECL-compatible signals, the required termination and voltage conventions must match the selected interface on both the input and output networks.
Connect the 44-VFQFN exposed pad to the ground plane with the recommended thermal-via pattern rather than leaving it isolated. The exposed pad provides both a low-impedance return path and a heat-removal route. Estimated thermal performance depends on copper area, via count, airflow, and dissipation, so evaluate junction temperature from the finished-board thermal model or measurement instead of assuming that the package alone limits temperature rise.
Validate the complete clock path with insertion-loss, jitter, and crosstalk measurements. The 3 GHz device rating does not guarantee acceptable eye closure at every receiver because package, connector, via, and PCB transitions contribute loss. Match differential pair geometry, avoid stubs, maintain return-path continuity through layer changes, and use the datasheet output and input compliance data when setting amplitude, common-mode voltage, and termination.
Decouple the supply pins with the capacitance and placement recommended by the manufacturer, and route the connection to a quiet supply node without shared high-current paths. The specified operating supply range is 2.375 V to 3.6 V; operation outside that range requires separate engineering evaluation. Keep sensitive clock inputs away from switching-node return currents and noisy processor power paths to limit supply-induced jitter on distributed clocks.
Informações de conformidade
Environmental and automotive compliance declarations are not stated in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with Microchip Technology before qualification.