SY89112UMG - 3GHz 2:12 Clock Buffer | Microchip Technology
MPN: SY89112UMG ✓ Hoạt độngSY89112UMG Tóm tắt
A clock fanout buffer is a clock-and-timing IC that receives one or more high-speed clock signals and reproduces them across multiple outputs. Its position in the hierarchy is clock buffer and fanout driver, then clock distribution device, then clock and timing IC. By consolidating clock distribution into one device, the SY89112UMG can reduce duplication in systems where a source clock must reach several serializers, transceivers, processors, or data-conversion circuits.
The principal feature of the SY89112UMG is its 2:12 fanout ratio, supported by a 3 GHz operating frequency. The device accepts input signals compatible with CML, LVDS, and LVPECL interfaces, making it suitable for systems that distribute high-speed differential clock signals between integrated circuits. Its core supply operating range is 2.375 V to 3.6 V, while its specified operating temperature range is -40 degrees Celsius to 85 degrees Celsius.
The 44-MLF package uses an exposed pad for surface mounting and heat removal. This arrangement supports compact layouts in telecommunications, networking, and high-speed computing equipment. Because the device operates at multi-gigahertz rates, controlled impedance routing, short clock traces, and a low-noise supply connection are central to achieving reliable signal integrity.
Typical uses include 1G network-interface clock distribution, backplane clock fanout, high-speed computing clock trees, and clock routing into communications transceivers. The SY89112UMG is especially relevant where one differential clock source must feed multiple downstream circuits without duplicating output-driver circuitry across the board.
Designers should treat the exposed pad as a thermal and electrical connection, follow the manufacturer pin-assignment table when routing inputs, outputs, supply, and ground, and maintain the specified supply range. PCB placement should minimize the distance between clock outputs and their receiving circuits so that edge degradation from board loss and crosstalk remains under control.
This page organizes the device specifications, interface capabilities, application fit, package constraints, and engineering considerations in one reference. It also separates confirmed device data from unknown values and identifies where a manufacturer datasheet or direct engineering confirmation is required before layout release or production sourcing.
Bộ thay thế dễ dàng lắp đặt cho SY89112UMG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SY89112UMG (cùng hình factor và footprint) — khác nhau ở Fanout Ratio, Product Type.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếSY89112UMG Thông số kỹ thuật
| Product Type | Clock fanout buffer and multiplexer |
| Fanout Ratio | 2:12 |
| Maximum Operating Frequency | 3 GHz |
| Input Logic Compatibility | CML, LVDS, and LVPECL |
| Operating Supply Voltage Range | 2.375 V to 3.6 V |
| Khoảng nhiệt độ hoạt động | -40 degrees Celsius to 85 degrees Celsius |
| Package Type | 44-VFQFN exposed pad |
| Package Designation | 44-MLF |
| Package Dimensions | 7 mm x 7 mm |
| Kiểu lắp đặt | Surface mount |
| Product Series | Precision Edge |
| Primary Application | High-speed clock distribution |
| Application Domains | Telecommunications, networking, and high-speed computing |
| Exposed Thermal Pad | Present |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
Hướng dẫn cấu hình chân SY89112UMG 7 mm x 7 mm
Cấu hình chân cho SY89112UMG (7 mm x 7 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SY89112UMG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SY89112UMG phù hợp cho 6 Áp dụngs: 1G Network-Interface Clock Distribution, Telecommunications Backplane Clock Fanout, High-Speed Computing Clock Trees, High-Speed Serial Transceiver Clocking, Data-Center Network Interface Cards, Clock Distribution for Test and Measurement Systems.
1G Network-Interface Clock Distribution
The SY89112UMG suits network-interface boards that must distribute a high-speed differential clock to multiple serializer or transceiver sections. Its 2:12 fanout ratio provides twelve outputs from two input sources, and the 3 GHz operating frequency offers ample headroom for 1G-class clock architectures. CML, LVDS, and LVPECL-compatible inputs allow the device to fit existing high-speed interface conventions. Place the device near the clock-consuming circuits, use controlled-impedance routing for differential pairs, and connect the exposed pad to the ground plane with thermal vias. This arrangement limits trace loss and crosstalk while avoiding a separate output-driver stage for each destination.
Được đề xuất
Telecommunications Backplane Clock Fanout
The SY89112UMG is appropriate for telecommunications backplanes where a common reference clock must reach multiple line cards or transceiver channels. The 2:12 ratio allows twelve low-fanout branches from two inputs, while the 3 GHz specification supports high-speed clock distribution close to the active electronics. Differential CML, LVDS, and LVPECL-compatible signaling helps preserve signal integrity over controlled-impedance board traces. Keep output traces short, avoid crossing clock nets with high-energy data paths, and provide a continuous reference plane beneath the routing. The 44-VFQFN exposed pad also supports efficient heat removal when multiple outputs operate continuously.
Được đề xuất
High-Speed Computing Clock Trees
The SY89112UMG can serve as a local clock-tree node in high-speed computing and processing systems where one or two clock sources feed several internal interfaces. Its twelve outputs reduce the number of discrete fanout drivers required near the load circuits, and the 3 GHz operating frequency provides useful margin above many processor-interface clock rates. The device is particularly useful where CML, LVDS, or LVPECL-compatible clocks are already present. Position the buffer close to the receiver group, match differential trace lengths where required by the interface standard, and keep the supply return path continuous. Validate the complete eye and jitter budget at system level because buffer and routing losses combine.
Được đề xuất
High-Speed Serial Transceiver Clocking
The SY89112UMG fits boards that feed several high-speed serial transceivers from a common low-jitter differential clock. Its 2:12 fanout configuration allows multiple links to receive independently routed clock branches without adding separate buffer stages, and the 3 GHz bandwidth supports modern high-speed serial interfaces. Compatibility with CML, LVDS, and LVPECL input conventions simplifies integration with existing clock-generation circuitry. Route each output as a controlled-impedance differential pair, keep the buffer close to the transceiver bank, and avoid sharing clock traces with noisy digital return paths. The exposed pad should use the manufacturer-recommended via pattern to maintain electrical return and thermal performance.
Được đề xuất
Data-Center Network Interface Cards
The SY89112UMG is a useful clock-distribution element on data-center interface cards where multiple ports, transceivers, or fabric links need a locally distributed clock. The 2:12 fanout ratio supports a compact clock tree, while the 3 GHz operating frequency accommodates high-speed link clocking and provides margin above typical reference-clock frequencies. The 44-VFQFN package supports dense multilayer PCB layouts, and its exposed pad provides a low-impedance return and thermal path. Place the fanout buffer upstream of the transceiver cluster while keeping individual clock branches short and matched. Validate insertion loss, jitter, and crosstalk against the receiver specifications for every supported link rate and data pattern.
Được đề xuất
Clock Distribution for Test and Measurement Systems
The SY89112UMG can distribute a high-speed reference clock across multiple measurement, conversion, or pattern-generation sections within an instrument. Its twelve outputs reduce the need for repeated downstream buffering and support simultaneous clocking of independent subsystems. The 3 GHz operating frequency is suitable for instrumentation that uses CML, LVDS, or LVPECL-compatible internal clock signals, while the 2.375 V to 3.6 V supply range fits conventional low-voltage logic systems. Use symmetrical routing to minimize skew between channels and keep the device near the clock-consuming analog and digital sections. Confirm output amplitude, jitter, and termination requirements from the manufacturer electrical-characteristics tables before finalizing the analog path.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SY89112UMG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Do not select a substitute solely because another device has twelve outputs or the same nominal package dimensions. A genuine drop-in candidate must match the footprint, pin mapping, fanout behavior, clock bandwidth, supply range, interface levels, and output specifications. The tube-packaged ordering code should not be treated as an engineering alternative, and the tape-and-reel order code represents a shipping format rather than a different device. When the requirements include a different fanout ratio, single-ended clocking, lower supply voltage, or a non-exposed-pad footprint, evaluate a different device family rather than assuming compatibility.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Microchip Technology |
| Package | 44-VFQFN exposed pad, 44-MLF, 7 mm x 7 mm |
| Product Type | Clock fanout buffer and multiplexer |
| Fanout Ratio | 2:12 |
| Maximum Operating Frequency | 3 GHz |
| Input Logic Compatibility | CML, LVDS, and LVPECL |
| Operating Supply Voltage Range | 2.375 V to 3.6 V |
| Operating Temperature Range | -40 degrees Celsius to 85 degrees Celsius |
| Mounting Type | Surface mount |
| Product Series | Precision Edge |
Bảo phân biệt quan trọng
- High fanout from two clock sources (vsSingle-output or lower-ratio clock buffers)
- Multi-gigahertz multi-output operation (vsLower-frequency general-purpose fanout buffers)
- Support for three high-speed logic conventions (vsBuffers limited to a single CML, LVDS, or LVPECL interface family)
- Compact exposed-pad surface-mount package (vsLarger leaded or non-exposed-pad clock buffers)
Ghi chú thiết kế
Place the SY89112UMG close to the clock-consuming circuits and keep each differential clock route as short as practical. Use the manufacturer reference layout for input and output pairing, and maintain a continuous reference plane beneath the routed pairs. Because the device supports CML, LVDS, and LVPECL-compatible signals, the required termination and voltage conventions must match the selected interface on both the input and output networks.
Connect the 44-VFQFN exposed pad to the ground plane with the recommended thermal-via pattern rather than leaving it isolated. The exposed pad provides both a low-impedance return path and a heat-removal route. Estimated thermal performance depends on copper area, via count, airflow, and dissipation, so evaluate junction temperature from the finished-board thermal model or measurement instead of assuming that the package alone limits temperature rise.
Validate the complete clock path with insertion-loss, jitter, and crosstalk measurements. The 3 GHz device rating does not guarantee acceptable eye closure at every receiver because package, connector, via, and PCB transitions contribute loss. Match differential pair geometry, avoid stubs, maintain return-path continuity through layer changes, and use the datasheet output and input compliance data when setting amplitude, common-mode voltage, and termination.
Decouple the supply pins with the capacitance and placement recommended by the manufacturer, and route the connection to a quiet supply node without shared high-current paths. The specified operating supply range is 2.375 V to 3.6 V; operation outside that range requires separate engineering evaluation. Keep sensitive clock inputs away from switching-node return currents and noisy processor power paths to limit supply-induced jitter on distributed clocks.
Thông tin tuân thủ
Environmental and automotive compliance declarations are not stated in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with Microchip Technology before qualification.