XC4VLX60-11FF668I - 448 I/O Virtex-4 LX FPGA | Xilinx
Артикул: XC4VLX60-11FF668I ✗ Снят с производстваXC4VLX60-11FF668I Обзор
An FPGA is a programmable semiconductor whose logic fabric, block RAM, and I/O resources can be configured after manufacture. Virtex-4 LX devices sit within the FPGA hierarchy between fixed-function digital ICs and larger programmable logic arrays. This combination of substantial logic density, embedded memory, and high pin count makes the XC4VLX60 useful for parallel processing, data acquisition, communications, embedded control, and test equipment.
The device provides 59,904 logic elements organized as 26,624 adaptive logic modules, 448 I/O, and 2.81 Mbit of embedded memory. These figures support concurrent digital channels, protocol engines, control logic, and buffering within one device. Its 668-ball FCBGA package also supports dense routing to external memory, transceivers, clocks, and high-speed interface devices without requiring a very large leaded package.
The suffix structure provides useful selection information without implying that all variants are interchangeable in every design. XC4VLX60-11FF668I combines the -11 speed grade with industrial-temperature operation. XC4VLX60-10FF668I uses the slower -10 grade, while XC4VLX60-12FF668C uses the faster -12 grade but specifies the commercial-temperature suffix. The FF and FFF package identifiers occur within the same 668-BBGA family and should be checked against the package drawing and bill of materials before substitution.
Typical uses include industrial instrumentation, high-speed data capture, network-interface aggregation, embedded video processing, and FPGA-based accelerator control. The 448 available I/Os are particularly useful where multiple buses, clocks, status signals, and differential or high-speed interfaces must converge on a single programmable device. The 1.2 V operating supply should be paired with a power rail designed for the device's specific voltage and current limits.
For a new Virtex-4 LX design, confirm the exact speed grade, temperature suffix, package ball map, and pinout against the AMD package files before fabrication. Legacy FPGA designs also require confirmation that the selected ISE version supports the device and bitstream. Upgrade paths to newer FPGA families should be treated as board-level redesigns rather than automatic drop-in replacements.
This page combines the device's 448-I/O, 59,904-logic-element architecture with verified package details, documented same-family alternatives, and practical guidance for FPGA migration, layout, power, thermal, and signal-integrity planning.
Аналоги без доработки для XC4VLX60-11FF668I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC4VLX60-11FF668I (тот же форм-фактор и посадочное место) — отличается по Speed Grade, Logic Blocks, Temperature Grade, Adaptive Logic Modules, Maximum Internal Frequency.
XC4VLX60-10FF668I
✅ Прямая заменаУточнить цену
Открыть даташит →XC4VLX60-11FFG668I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC4VLX60-11FFG668C
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC4VLX60-11FF668C
✅ Прямая заменаУточнить цену
Открыть даташит →XC4VLX60-12FF668C
✅ Прямая заменаУточнить цену
Открыть даташит →XC4VLX60-11FF668I Максимальные параметры и электрические характеристики
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Elements | 59,904 logic elements |
| Adaptive Logic Modules | 26,624 ALMs |
| Embedded Memory | 2.81 Mbit |
| User I/O Count | 448 I/O |
| Number of Terminals | 668 terminals |
| Корпус | 668-BBGA FCBGA |
| Package Shape | Square |
| Terminal Form | Ball |
| Рабочее напряжение питания | 1.2 V |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +100 °C |
| Способ монтажа | SMD/SMT |
| Maximum Peak Reflow Time | 30 s |
| Speed Grade | -11 |
| Temperature Grade | Industrial |
Руководство по цоколевке XC4VLX60-11FF668I в корпусе square
Цоколевка для XC4VLX60-11FF668I (корпус square). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC4VLX60-11FF668I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC4VLX60-11FF668I подходит для 6 применениеs: Industrial Data Acquisition, High-Speed Communications, Test and Measurement Equipment, Embedded Video Processing, Network Interface Aggregation, Industrial Control and Automation.
Industrial Data Acquisition
The XC4VLX60-11FF668I fits industrial data-acquisition systems requiring many parallel sensor, trigger, and status connections. Its 448 I/Os provide substantial board-level connectivity, while 59,904 logic elements and 26,624 ALMs can implement acquisition control, channel multiplexing, filtering, and data packing. The device's industrial -40 °C to +100 °C temperature range supports use in temperature-controlled factory equipment and rugged instrumentation. Place external high-speed memory and converters close to the relevant BGA banks, and analyze simultaneous switching on the 1.2 V rail to prevent acquisition noise from disturbing clocking or sampling accuracy.
Рекомендуется
High-Speed Communications
The XC4VLX60-11FF668I is appropriate for communications equipment that combines parallel bus control, packet processing, and multiple external interfaces. Its 448 I/Os support address and data buses, transmit and receive control, clock distribution, and status monitoring, while the 2.81 Mbit embedded-memory capacity can buffer packets or retain channel state. The -11 speed grade provides a useful timing tier for demanding parallel logic. Engineers should constrain interfaces to the appropriate I/O voltage, preserve clock-clean routing, and use source-synchronous techniques where supported by the selected interface architecture.
Рекомендуется
Test and Measurement Equipment
The XC4VLX60-11FF668I can coordinate complex test and measurement instruments where pattern generation, timing control, result capture, and front-panel connectivity must operate concurrently. The 59,904 logic elements support parallel digital channels and control engines, while 448 I/Os expose test buses, triggers, clocks, status indicators, and processor interfaces. Embedded memory of 2.81 Mbit helps buffer captured data or implement timing-based state machines. For accurate measurements, isolate analog circuitry from the FPGA's high-current switching activity and use controlled clock and differential-routing techniques to minimize data-correlation errors.
Рекомендуется
Embedded Video Processing
The XC4VLX60-11FF668I offers sufficient logic and I/O resources for legacy embedded video pipelines that combine pixel transport, control, memory arbitration, and system communication. Its 448 I/Os can connect external video memories, serializers, and control processors, while 26,624 ALMs perform parallel processing stages. The 2.81 Mbit of embedded memory supports line buffers, lookup structures, or frame-segment storage where system memory bandwidth is constrained. Keep pixel-clock domains synchronized, match I/O standards to the external devices, and include timing constraints for every major clock domain before implementation.
Рекомендуется
Network Interface Aggregation
The XC4VLX60-11FF668I can aggregate multiple narrow packet channels into a wider system interface when deterministic parallel throughput is more important than compact size. Its 448 I/Os provide connections for packet engines, FIFOs, management signals, and a host processor, while 26,624 ALMs can implement framing, classification, and checksum functions. Embedded memory can support packet queues and buffering for moderate traffic bursts. Use separate clock regions for each interface where possible, constrain input delays, and verify that the selected I/O standards and timing margins remain valid across all supported line rates.
Рекомендуется
Industrial Control and Automation
The XC4VLX60-11FF668I suits industrial controllers requiring deterministic logic, extensive peripheral connectivity, and operation across -40 °C to +100 °C. The device can execute motion sequencing, safety interlocks, machine monitoring, and communication protocols in parallel while supplying hundreds of external connections to sensors and actuators. Its -11 speed grade helps meet demanding control-loop timing, and 2.81 Mbit of embedded memory supports queues, counters, and diagnostic histories. Validate timing with production ISE constraints, isolate switching noise from precision I/O, and review watchdogs and fail-safe behavior independently of the FPGA.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC4VLX60-11FF668I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC4VLX60-10FF668I | XC4VLX60-11FFG668I | XC4VLX60-11FFG668C | XC4VLX60-11FF668C | XC4VLX60-12FF668C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Elements | 59,904 logic elements | 59,904 logic elements | 59,904 logic elements | 59,904 logic elements | 59,904 logic elements | 59,904 logic elements |
| User I/O Count | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Speed Grade | -11 | -10 | -11 | -11 | -11 | -12 |
| Temperature Grade | Industrial, -40 °C to +100 °C | Industrial | Industrial | Commercial | Commercial | Commercial |
Ключевые отличия
- Industrial temperature capability combined with the -11 speed grade (против XC4VLX60-11FF668C)
- Higher speed-grade designation than the -10 option (против XC4VLX60-10FF668I)
- Commercial -12 speed option supports potentially tighter timing performance (против XC4VLX60-12FF668C)
- Large logic and connectivity resources for parallel systems (против XC4VLX60-11FFG668I)
Заметки по проектированию
Use the AMD FF668 package files to assign every power, ground, configuration, and user-I/O ball before layout. Place the FPGA's local bypass capacitors directly at the relevant supply and ground balls, and use a continuous power plane where package rules permit. Preserve the package drawing's thermal-via and exposed-feature requirements; omitting them can increase junction temperature and degrade long-term reliability. Do not route a replacement candidate until its exact FF or FFG package identifier has been checked against the same mechanical and electrical drawing.
Design the 1.2 V rail for the FPGA's documented peak and transient current rather than its average active power alone. Place regulator output and decoupling paths close to the device, keep switching loops compact, and verify that load steps do not pull the supply below the operating limit. Use the manufacturer's power-estimation methodology with actual design utilization, clocking, and I/O activity. A practical rail should also support orderly startup and configuration while avoiding excessive inrush from board-level bulk capacitance.
Constrain every clock, source-synchronous interface, and external bus in the FPGA project, including board-generated timing paths. Match external devices to the supported I/O standards, keep clock and data routing symmetrical, and add matched termination or series damping where the channel requires it. The 668-BBGA package offers dense routing flexibility, but high pin-count escape paths still require careful layer planning. Validate eye closure and timing margin through post-layout simulation and measurement rather than relying on schematic connectivity alone.
Do not treat XC4VLX60 speed-grade or temperature-suffix changes as automatic production-equivalent substitutions. Confirm whether the design requires the -10, -11, or -12 performance tier and whether industrial -40 °C to +100 °C operation is mandatory. Also distinguish FF from FFG package identifiers through the package file rather than their names alone. When migrating an existing ISE design, preserve configuration constraints, bitstream compatibility, and any legacy memory-device interfaces before changing the FPGA MPN.
Информация о соответствии
The device is an industrial-temperature FPGA, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated for this exact MPN. AEC-Q100 is not applicable because the device is not identified as an automotive-qualified part.