Xilinx

XC4VLX60-11FF668I - 448 I/O Virtex-4 LX FPGA | Xilinx

MPN: XC4VLX60-11FF668I ✗ پایان تولید
1.2 V Vdss 668-BBGA FCBGA Package -11 Speed 2.81 Mbit Memory
حداقل سفارش: 1 |

XC4VLX60-11FF668I نمای کلی

The Xilinx XC4VLX60-11FF668I is a Virtex-4 LX field-programmable gate array with 448 I/Os, 59,904 logic elements, and 26,624 adaptive logic modules in a 668-BBGA FCBGA package. It operates from a 1.2 V supply and supports an industrial temperature range from -40 °C to +100 °C. The -11 suffix identifies the device speed grade, while the I suffix denotes industrial-temperature operation.

An FPGA is a programmable semiconductor whose logic fabric, block RAM, and I/O resources can be configured after manufacture. Virtex-4 LX devices sit within the FPGA hierarchy between fixed-function digital ICs and larger programmable logic arrays. This combination of substantial logic density, embedded memory, and high pin count makes the XC4VLX60 useful for parallel processing, data acquisition, communications, embedded control, and test equipment.

The device provides 59,904 logic elements organized as 26,624 adaptive logic modules, 448 I/O, and 2.81 Mbit of embedded memory. These figures support concurrent digital channels, protocol engines, control logic, and buffering within one device. Its 668-ball FCBGA package also supports dense routing to external memory, transceivers, clocks, and high-speed interface devices without requiring a very large leaded package.

The suffix structure provides useful selection information without implying that all variants are interchangeable in every design. XC4VLX60-11FF668I combines the -11 speed grade with industrial-temperature operation. XC4VLX60-10FF668I uses the slower -10 grade, while XC4VLX60-12FF668C uses the faster -12 grade but specifies the commercial-temperature suffix. The FF and FFF package identifiers occur within the same 668-BBGA family and should be checked against the package drawing and bill of materials before substitution.

Typical uses include industrial instrumentation, high-speed data capture, network-interface aggregation, embedded video processing, and FPGA-based accelerator control. The 448 available I/Os are particularly useful where multiple buses, clocks, status signals, and differential or high-speed interfaces must converge on a single programmable device. The 1.2 V operating supply should be paired with a power rail designed for the device's specific voltage and current limits.

For a new Virtex-4 LX design, confirm the exact speed grade, temperature suffix, package ball map, and pinout against the AMD package files before fabrication. Legacy FPGA designs also require confirmation that the selected ISE version supports the device and bitstream. Upgrade paths to newer FPGA families should be treated as board-level redesigns rather than automatic drop-in replacements.

This page combines the device's 448-I/O, 59,904-logic-element architecture with verified package details, documented same-family alternatives, and practical guidance for FPGA migration, layout, power, thermal, and signal-integrity planning.

جایگزین‌های drop-in برای XC4VLX60-11FF668I — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای XC4VLX60-11FF668I (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Speed Grade, Logic Blocks, Temperature Grade, Adaptive Logic Modules, Maximum Internal Frequency.

AMD
Speed Grade: -10
Logic Blocks: 6,656
Temperature Grade: Industrial, 0°C to 85°C
مقایسه با XC4VLX60-11FF668I →
AMD
Logic Blocks: 6,656 blocks
Temperature Grade: Commercial (C)
مقایسه با XC4VLX60-11FF668I →
AMD
Speed Grade: -12 performance grade
Logic Blocks: 6,656 logic blocks
Maximum Internal Frequency: 1028 MHz
مقایسه با XC4VLX60-11FF668I →

XC4VLX60-10FF668I

✅ جایگزین مستقیم
AMD
📦 668-BBGA FCBGA
Virtex-4 LX field-programmable gate array · 59,904 cells · 26,624 ALM · 2.81 Mbit · 448 I/O · 6,656 · 90 nm CMOS · 1.2 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC4VLX60-11FFG668I

✅ جایگزین مستقیم
📦 668-BBGA FCBGA
Package identifier changes from FF668 to FFG668 by one package-code class; -11 speed, industrial grade, 448 I/Os and 59,904 logic elements remain

📋 جایگزین مرجع (خارج از کاتالوگ)

XC4VLX60-11FFG668C

✅ جایگزین مستقیم
📦 668-BBGA FCBGA
Temperature grade changes from industrial I to commercial C; -11 speed, 448 I/Os and 59,904 logic elements remain

📋 جایگزین مرجع (خارج از کاتالوگ)

XC4VLX60-11FF668C

✅ جایگزین مستقیم
AMD
📦 668-BBGA FCBGA
Virtex-4 LX Field-Programmable Gate Array · 59,904 cells · 6,656 blocks · 448 I/O · 1,028 MHz · 90 nm CMOS · 1.2 V · 668-pin FCBGA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC4VLX60-12FF668C

✅ جایگزین مستقیم
AMD
📦 668-BBGA FCBGA
Virtex-4 LX · 59,904 cells · 6,656 logic blocks · 90 nm CMOS · 1.2 V · 1028 MHz · -12 performance grade · 668-pin FCBGA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC4VLX60-11FF668I حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Virtex-4 LX field-programmable gate array
Logic Elements 59,904 logic elements
Adaptive Logic Modules 26,624 ALMs
Embedded Memory 2.81 Mbit
User I/O Count 448 I/O
Number of Terminals 668 terminals
بسته‌بندی 668-BBGA FCBGA
Package Shape Square
Terminal Form Ball
ولتاژ تغذیه کاری 1.2 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +100 °C
سبک نصب SMD/SMT
Maximum Peak Reflow Time 30 s
Speed Grade -11
Temperature Grade Industrial

راهنمای پیکربندی پین XC4VLX60-11FF668I square

پیکربندی پین برای XC4VLX60-11FF668I (پکیج square). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج square برای XC4VLX60-11FF668I

داده پین‌آوت تفصیلی موجود نیست برای XC4VLX60-11FF668I.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

XC4VLX60-11FF668I مناسب است برای 6 کاربردs: Industrial Data Acquisition, High-Speed Communications, Test and Measurement Equipment, Embedded Video Processing, Network Interface Aggregation, Industrial Control and Automation.

🏭

Industrial Data Acquisition

The XC4VLX60-11FF668I fits industrial data-acquisition systems requiring many parallel sensor, trigger, and status connections. Its 448 I/Os provide substantial board-level connectivity, while 59,904 logic elements and 26,624 ALMs can implement acquisition control, channel multiplexing, filtering, and data packing. The device's industrial -40 °C to +100 °C temperature range supports use in temperature-controlled factory equipment and rugged instrumentation. Place external high-speed memory and converters close to the relevant BGA banks, and analyze simultaneous switching on the 1.2 V rail to prevent acquisition noise from disturbing clocking or sampling accuracy.

🌐

High-Speed Communications

The XC4VLX60-11FF668I is appropriate for communications equipment that combines parallel bus control, packet processing, and multiple external interfaces. Its 448 I/Os support address and data buses, transmit and receive control, clock distribution, and status monitoring, while the 2.81 Mbit embedded-memory capacity can buffer packets or retain channel state. The -11 speed grade provides a useful timing tier for demanding parallel logic. Engineers should constrain interfaces to the appropriate I/O voltage, preserve clock-clean routing, and use source-synchronous techniques where supported by the selected interface architecture.

🖥️

Test and Measurement Equipment

The XC4VLX60-11FF668I can coordinate complex test and measurement instruments where pattern generation, timing control, result capture, and front-panel connectivity must operate concurrently. The 59,904 logic elements support parallel digital channels and control engines, while 448 I/Os expose test buses, triggers, clocks, status indicators, and processor interfaces. Embedded memory of 2.81 Mbit helps buffer captured data or implement timing-based state machines. For accurate measurements, isolate analog circuitry from the FPGA's high-current switching activity and use controlled clock and differential-routing techniques to minimize data-correlation errors.

📺

Embedded Video Processing

The XC4VLX60-11FF668I offers sufficient logic and I/O resources for legacy embedded video pipelines that combine pixel transport, control, memory arbitration, and system communication. Its 448 I/Os can connect external video memories, serializers, and control processors, while 26,624 ALMs perform parallel processing stages. The 2.81 Mbit of embedded memory supports line buffers, lookup structures, or frame-segment storage where system memory bandwidth is constrained. Keep pixel-clock domains synchronized, match I/O standards to the external devices, and include timing constraints for every major clock domain before implementation.

🌐

Network Interface Aggregation

The XC4VLX60-11FF668I can aggregate multiple narrow packet channels into a wider system interface when deterministic parallel throughput is more important than compact size. Its 448 I/Os provide connections for packet engines, FIFOs, management signals, and a host processor, while 26,624 ALMs can implement framing, classification, and checksum functions. Embedded memory can support packet queues and buffering for moderate traffic bursts. Use separate clock regions for each interface where possible, constrain input delays, and verify that the selected I/O standards and timing margins remain valid across all supported line rates.

🤖

Industrial Control and Automation

The XC4VLX60-11FF668I suits industrial controllers requiring deterministic logic, extensive peripheral connectivity, and operation across -40 °C to +100 °C. The device can execute motion sequencing, safety interlocks, machine monitoring, and communication protocols in parallel while supplying hundreds of external connections to sensors and actuators. Its -11 speed grade helps meet demanding control-loop timing, and 2.81 Mbit of embedded memory supports queues, counters, and diagnostic histories. Validate timing with production ISE constraints, isolate switching noise from precision I/O, and review watchdogs and fail-safe behavior independently of the FPGA.

What are the key specifications of XC4VLX60-11FF668I that engineers should know?
The XC4VLX60-11FF668I is a Virtex-4 LX FPGA with 59,904 logic elements, 26,624 adaptive logic modules, 2.81 Mbit of embedded memory, and 448 I/Os in a 668-BBGA FCBGA package. According to the AMD/Xilinx product data, it operates from a 1.2 V supply and is specified from -40 °C to +100 °C. The -11 suffix identifies its speed grade, and the I suffix identifies industrial-temperature operation. These resources make the device suitable for parallel digital processing, embedded buffering, instrumentation, communications, and control systems requiring a large number of programmable I/Os.
Where can I download the XC4VLX60-11FF668I datasheet PDF?
The XC4VLX60-11FF668I datasheet can be reached through the dedicated Octopart datasheet page for this exact MPN. The page provides access to the latest device documentation and technical specifications. For board-level implementation, also use the AMD Virtex-4 package-device pinout files, because the package drawing, ball assignments, power pins, and exposed thermal requirements determine PCB compatibility. Confirm that the documentation covers the FF668 package, the -11 speed grade, and the industrial I suffix before using it for design release.
Where can I find the XC4VLX60-11FF668I pinout and package information?
The XC4VLX60-11FF668I uses a 668-BBGA FCBGA package with 448 user I/Os, and the authoritative ball-level assignments are published in the AMD Virtex-4 package-device pinout files. Use the exact package file for FF668 rather than a generic 668-pin diagram, because power, configuration, ground, and differential-pair assignments are package-specific. The package has no conventional lead numbering of the type used by DIP devices. Validate every proposed net against the package file and the FPGA design constraints before releasing PCB artwork.
What does the XC4VLX60-11FF668I suffix mean?
The XC4VLX60-11FF668I suffix identifies the device family, speed grade, package variant, and temperature grade. XC4VLX60 denotes the Virtex-4 LX device with 59,904 logic elements; -11 identifies the speed grade; FF668 identifies the 668-BBGA package family; and I denotes industrial-temperature operation. According to the AMD/Xilinx listing, the device supports -40 °C to +100 °C. The suffix is therefore useful for screening alternatives, but package ball mapping and design-tool support must also be checked before treating another MPN as a replacement.
Is XC4VLX60-11FF668I suitable for industrial instrumentation?
The XC4VLX60-11FF668I is suitable for industrial instrumentation when its temperature and package requirements match the system. The industrial suffix supports operation from -40 °C to +100 °C, while the 59,904 logic elements and 448 I/Os can support acquisition channels, trigger logic, buffering, control, and communications in parallel. Because the device uses a dense 668-BBGA package, the PCB must provide adequate escape routing, a stable 1.2 V supply, and thermal management. Confirm signal-integrity and thermal performance at the system's worst ambient and power conditions.
What is the difference between XC4VLX60-11FF668I and XC4VLX60-10FF668I?
The principal difference between XC4VLX60-11FF668I and XC4VLX60-10FF668I is the speed-grade suffix: -11 versus -10. Both are identified as Virtex-4 LX devices with 448 I/Os, 59,904 logic elements, and a 668-BBGA FCBGA package. The -11 device is the appropriate choice when greater timing performance is needed, while the -10 device may be considered when the lower speed grade satisfies the design. Confirm the exact package drawing, electrical limits, and tool-supported bitstream before substitution.
XC4VLX60-11FF668I vs XC4VLX60-12FF668C - which is better for a timing-critical design?
XC4VLX60-12FF668C uses a faster -12 speed-grade designation than the -11 grade of XC4VLX60-11FF668I, but its C suffix identifies a commercial-temperature variant rather than the industrial I variant. A timing-critical industrial system should therefore not select the -12 commercial part solely for its speed suffix. The correct comparison depends on timing closure, ambient temperature, and lifecycle requirements. Use the manufacturer speed tables and ISE timing analysis to establish which part meets the actual timing and temperature requirements.
When should I choose XC4VLX60-11FF668I over XC4VLX60-11FFG668I?
Choose XC4VLX60-11FF668I when the design specifically requires the FF package identifier, -11 speed grade, and industrial-temperature suffix. XC4VLX60-11FFG668I appears in the same-family cross-reference set and retains the -11 speed grade, industrial suffix, 668-package family, 448 I/Os, and 59,904 logic elements. However, the FF-versus-FFF identifier must be checked against the manufacturer package file and bill of materials. Do not assume that package-family similarity alone proves exact electrical and mechanical equivalence.
What can replace XC4VLX60-11FF668I on the same PCB?
XC4VLX60-10FF668I is a documented same-family 668-BBGA option that changes the speed grade from -11 to -10 while retaining the Virtex-4 LX identity, 448 I/Os, and 59,904 logic elements. Other documented same-family choices include XC4VLX60-11FFG668I, XC4VLX60-11FFG668C, and XC4VLX60-11FF668C, with changes involving package identifiers or temperature grade. The closest drop-in candidate depends on the original bill-of-materials code and required operating temperature. Verify ball assignments, power requirements, speed, and ISE compatibility before substitution.
Is XC4VLX60-11FF668I the same as XC4VLX60-11FF668C?
No. The XC4VLX60-11FF668I and XC4VLX60-11FF668C share the Virtex-4 LX device, -11 speed grade, 668-package family, 448 I/Os, and 59,904 logic elements, but their final temperature suffixes differ. The I version is specified for industrial operation from -40 °C to +100 °C, whereas the C version represents the commercial-temperature option. The lower-rated part may not satisfy an industrial environment. Check the exact bill-of-materials code, temperature requirement, and package file before replacing one with the other.
Can XC4VLX60-11FF668I replace XC4VLX60-11FFG668C?
The XC4VLX60-11FF668I can be considered only if the XC4VLX60-11FFG668C design meets its industrial-temperature requirement and the FF and FFF package identifiers have matching electrical and mechanical assignments. Both parts are Virtex-4 LX devices with the -11 speed designation and the 668-BBGA family. The I version supports -40 °C to +100 °C, whereas the C version is commercial-temperature. Use the AMD package files and the original design's bill of materials to establish exact interchangeability rather than relying only on the visible family similarities.
What is the best Xilinx equivalent for XC4VLX60-11FF668I?
The closest documented same-brand choice is XC4VLX60-10FF668I because it retains the Virtex-4 LX architecture, 448 I/Os, 59,904 logic elements, and 668-BBGA package while changing the speed grade from -11 to -10. For designs that do not require the -11 performance tier, it may be a practical drop-in candidate. The manufacturer package file and the -10/-11 timing results must be checked before board release. A newer Xilinx device is not automatically pin-compatible and should be evaluated as a redesign.
How much power does the XC4VLX60-11FF668I require?
The XC4VLX60-11FF668I operates from a 1.2 V supply, but the exact total current depends on design utilization, I/O activity, clocking, configuration method, and the selected I/O standards. A conservative rail design should use the device's maximum-current and power-distribution limits from the AMD/Xilinx documentation rather than a generic FPGA estimate. Place local decoupling close to the device, provide adequate power-plane area, and model worst-case simultaneous switching activity. These practices reduce supply droop and keep clock and I/O rails within the device's operating envelope.
How should power and thermal requirements be handled for the XC4VLX60-11FF668I?
The XC4VLX60-11FF668I should be powered from a stable 1.2 V rail with placement-controlled decoupling and a power distribution network sized for the device's documented current and transient requirements. The 668-BBGA package also requires thermal analysis because dense high-performance logic can concentrate heat beneath the package. Use the manufacturer's power-estimation and thermal guidance, preserve exposed thermal features required by the package drawing, and test the assembled board at maximum ambient temperature. Avoid deriving a production thermal limit from a generic estimate.
Where can I buy XC4VLX60-11FF668I and what is its lead time?
Use the Request a Quote form on this page to request current XC4VLX60-11FF668I availability, unit pricing, minimum order quantity, and production lead time. Because the Virtex-4 LX generation is an older FPGA family, current sourcing status can vary by lot and package suffix, and a standard catalog number does not guarantee immediate stock. Quote the complete MPN and any required assembly, traceability, or extended-temperature-storage requirements. The form provides a single channel for an auditable purchase request without relying on stale listing text.
Is XC4VLX60-11FF668I still active for new designs?
The XC4VLX60-11FF668I belongs to the mature Virtex-4 LX FPGA generation and should be treated as an obsolete or legacy platform for new-design planning. The device remains useful for maintaining or reproducing existing equipment, but its long-term availability differs from current FPGA families. For a new project, evaluate current AMD/Xilinx or Xilinx devices, migration tools, ISE support, and long-term supply expectations. If maintaining an installed design, preserve the exact package, speed, and temperature suffix rather than substituting by family name alone.

داده‌های مرجع مهندسی برای XC4VLX60-11FF668I — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose XC4VLX60-11FF668I for maintenance programs and legacy designs that require the exact -11 speed grade, industrial -40 °C to +100 °C range, FF668 package identifier, 448 I/Os, and 59,904 logic elements. XC4VLX60-10FF668I is the closest lower-speed choice when existing timing margins do not require the -11 grade. XC4VLX60-11FFG668I may suit designs covered by an FFG package file, while the C-suffix alternatives are appropriate only when commercial-temperature operation is acceptable. XC4VLX60-12FF668C offers a higher speed designation but is not an industrial-temperature substitute. Because FF and FFG codes refer to package-specific details, validate the exact bill-of-materials code, AMD package drawing, power requirements, timing results, and configuration setup before replacing any part. Treat migration to a newer FPGA family as a redesign, not a drop-in conversion.

مقایسه با جایگزین‌ها

پارامتر این محصول XC4VLX60-10FF668I XC4VLX60-11FFG668I XC4VLX60-11FFG668C XC4VLX60-11FF668C XC4VLX60-12FF668C
Brand Xilinx Xilinx Xilinx Xilinx Xilinx Xilinx
Package 668-BBGA FCBGA 668-BBGA FCBGA 668-BBGA FCBGA 668-BBGA FCBGA 668-BBGA FCBGA 668-BBGA FCBGA
Device Family Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX
Logic Elements 59,904 logic elements 59,904 logic elements 59,904 logic elements 59,904 logic elements 59,904 logic elements 59,904 logic elements
User I/O Count 448 I/O 448 I/O 448 I/O 448 I/O 448 I/O 448 I/O
Speed Grade -11 -10 -11 -11 -11 -12
Temperature Grade Industrial, -40 °C to +100 °C Industrial Industrial Commercial Commercial Commercial

تفاوت‌های کلیدی

  • Industrial temperature capability combined with the -11 speed grade (در مقابلXC4VLX60-11FF668C)
  • Higher speed-grade designation than the -10 option (در مقابلXC4VLX60-10FF668I)
  • Commercial -12 speed option supports potentially tighter timing performance (در مقابلXC4VLX60-12FF668C)
  • Large logic and connectivity resources for parallel systems (در مقابلXC4VLX60-11FFG668I)

یادداشت‌های طراحی

Use the AMD FF668 package files to assign every power, ground, configuration, and user-I/O ball before layout. Place the FPGA's local bypass capacitors directly at the relevant supply and ground balls, and use a continuous power plane where package rules permit. Preserve the package drawing's thermal-via and exposed-feature requirements; omitting them can increase junction temperature and degrade long-term reliability. Do not route a replacement candidate until its exact FF or FFG package identifier has been checked against the same mechanical and electrical drawing.

Design the 1.2 V rail for the FPGA's documented peak and transient current rather than its average active power alone. Place regulator output and decoupling paths close to the device, keep switching loops compact, and verify that load steps do not pull the supply below the operating limit. Use the manufacturer's power-estimation methodology with actual design utilization, clocking, and I/O activity. A practical rail should also support orderly startup and configuration while avoiding excessive inrush from board-level bulk capacitance.

Constrain every clock, source-synchronous interface, and external bus in the FPGA project, including board-generated timing paths. Match external devices to the supported I/O standards, keep clock and data routing symmetrical, and add matched termination or series damping where the channel requires it. The 668-BBGA package offers dense routing flexibility, but high pin-count escape paths still require careful layer planning. Validate eye closure and timing margin through post-layout simulation and measurement rather than relying on schematic connectivity alone.

Do not treat XC4VLX60 speed-grade or temperature-suffix changes as automatic production-equivalent substitutions. Confirm whether the design requires the -10, -11, or -12 performance tier and whether industrial -40 °C to +100 °C operation is mandatory. Also distinguish FF from FFG package identifiers through the package file rather than their names alone. When migrating an existing ISE design, preserve configuration constraints, bitstream compatibility, and any legacy memory-device interfaces before changing the FPGA MPN.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The device is an industrial-temperature FPGA, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated for this exact MPN. AEC-Q100 is not applicable because the device is not identified as an automotive-qualified part.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

XC4VLX60-11FF668I datasheet XC4VLX60-11FF668I pinout XC4VLX60-11FF668I datasheet pdf XC4VLX60-11FF668I specifications XC4VLX60-11FF668I equivalent XC4VLX60-11FF668I replacement XC4VLX60-11FF668I cross reference XC4VLX60-11FF668I footprint XC4VLX60-11FF668I price XC4VLX60-11FF668I stock Xilinx XC4VLX60-11FF668I XC4VLX60-11FF668I vs XC4VLX60-10FF668I 668 BBGA Virtex-4 LX FPGA XC4VLX60 industrial temperature FPGA

قطعات و اصطلاحات مرتبط

Xilinx AMD XC4VLX60-11FF668I XC4VLX60-10FF668I XC4VLX60-11FFG668I XC4VLX60-11FFG668C XC4VLX60-11FF668C XC4VLX60-12FF668C Virtex-4 LX FPGA field-programmable gate array programmable logic logic element adaptive logic module ALM block RAM embedded memory 668-BBGA FCBGA BGA surface-mount package 448 I/O 1.2 V power supply industrial temperature grade speed grade -11 ISE design tool RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ