XC6SLX16-L1FTG256I - 14,579-Cell Spartan-6 LX FPGA | AMD
Артикул: XC6SLX16-L1FTG256I ✓ АктивенXC6SLX16-L1FTG256I Обзор
An FPGA is a reconfigurable semiconductor in which digital logic, interface functions, and signal-processing blocks are programmed after manufacture. A field-programmable gate array belongs to the broader programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor. Spartan-6 LX devices combine configurable logic and fixed or configurable resources in one package, allowing designers to implement parallel processing, control logic, communication interfaces, and embedded systems without relying on a separate ASIC fabrication cycle.
The Spartan-6 LX family emphasizes integrated system functionality and low power relative to earlier Spartan generations. For this -1L device, the principal documented resource figures are 14,579 logic cells, 186 I/O, and 589,824 bits of block RAM. Its 45 nm CMOS implementation and 1 V core supply are important for clocking, power budgeting, signal-integrity analysis, and thermal design. The FTG256 package also supports dense PCB layouts where 186 user I/O must be routed in a relatively small component footprint.
The -1L grade trades maximum speed for lower power and is intended for designs that can operate within its timing constraints. Unlike the -2 and -3 Spartan-6 speed grades, it should not be assumed to provide identical fMAX or setup-and-hold timing. Configuration data, pin constraints, and timing margins must therefore be checked against the exact -1L device before tape-out or production release. The FTG256 package also requires careful BGA layout, via-in-pad policy, solder-paste control, and thermal-via design.
Typical uses include industrial control, test and measurement, networking equipment, embedded video processing, sensor acquisition, and communications infrastructure. The 186 I/O count is useful for parallel sensor inputs, digital buses, status controls, and external memory interfaces, while 589,824 bits of block RAM support buffering, packet storage, waveform capture, and moderate-speed data pipelines. The industrial option also supports deployments where temperature robustness matters more than a -2 or -3 grade's timing headroom.
Design with the exact device-specific pinout and package files for XC6SLX16 rather than relying only on a generic Spartan-6 diagram. Validate all I/O standards against the selected bank supply voltages, preserve configuration access requirements, and include test access for manufacturing. Confirm the bitstream is generated for the correct speed grade, package, temperature option, and part number before deployment.
This product record combines device resource details, package and pin-compatibility information, sourcing guidance, and application-specific engineering considerations. It also distinguishes exact drop-in alternatives from speed- or temperature-grade changes, helping engineers assess PCB reuse, timing impact, qualification requirements, and configuration compatibility before selecting a replacement.
Аналоги без доработки для XC6SLX16-L1FTG256I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC6SLX16-L1FTG256I (тот же форм-фактор и посадочное место) — отличается по Package, Logic Cells, Operating Temperature, Device Type, Speed Grade.
XC6SLX16-2FTG256I
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX16-3FTG256I
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX16-2FTG256C
✅ Прямая замена✓ В наличии
$16.4063 / шт.
Открыть даташит →XC6SLX9-2FTG256I
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX25-2FTG256I
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX16-L1FTG256I Максимальные параметры и электрические характеристики
| Device Type | Spartan-6 LX Field Programmable Gate Array |
| Logic Cells | 14,579 cells |
| User I/O | 186 I/O |
| Block RAM | 589,824 bits |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1 V |
| Performance Grade | -1L speed grade |
| Temperature Grade | Industrial grade |
| Корпус | 256-ball FT BGA |
| Device Family | Spartan-6 LX |
| FPGA Configuration | Spartan-6 configuration architecture |
Руководство по цоколевке XC6SLX16-L1FTG256I в корпусе 256-ball ft bga
Цоколевка для XC6SLX16-L1FTG256I (корпус 256-ball ft bga). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC6SLX16-L1FTG256I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC6SLX16-L1FTG256I подходит для 6 применениеs: Industrial PLC and Automation Controller, Test and Measurement Instrumentation, Networking and Communications Equipment, Sensor Acquisition and Signal Conditioning, Embedded Video and Display Processing, Aerospace and Defense Support Logic.
Industrial PLC and Automation Controller
The XC6SLX16-L1FTG256I fits industrial control logic that combines deterministic parallel operations with a substantial number of external signals. Its 14,579 logic cells can support state machines, interlocks, motion sequencing, and communication-interface logic, while 186 I/O provide connections to sensors, actuators, encoders, and discrete industrial I/O modules. The 589,824 bits of block RAM can hold production counters, diagnostic traces, or packet buffers. Used with the -1L speed grade, the FPGA must close timing at the lower-power operating class. The -1L and industrial designation make it appropriate for temperature-controlled cabinets, machine controls, and test systems where reliable operation and low power are prioritized over maximum switching performance.
Рекомендуется
Test and Measurement Instrumentation
The XC6SLX16-L1FTG256I is suitable for parallel data acquisition, stimulus sequencing, and digital signal conditioning in test equipment. The 186 user I/O can connect logic probes, triggers, status signals, and multiple converters, while 589,824 bits of block RAM can buffer captured samples or temporary pattern data. Configurable logic can implement filters, counters, timing engines, and protocol state machines in parallel. Designers should use the AMD package and timing documentation for the exact -1L grade, because acquisition clock rates and setup-and-hold margins depend on speed-grade performance. The device is especially useful when a compact instrument needs deterministic parallel logic, configurable I/O standards, and local sample buffering without adding a separate high-performance processor.
Рекомендуется
Networking and Communications Equipment
XC6SLX16-L1FTG256I can implement packet-processing, framing, filtering, and interface-conversion logic in embedded networking equipment. Its 14,579 logic cells are suitable for parallel header inspection, queue-control state machines, and stream arbitration, while the 589,824 bits of block RAM can support bounded packet or frame buffers. The 186 I/O provide substantial connectivity for parallel PHY interfaces, control signals, and status monitoring. A practical design should partition the design into clock domains, place receive and transmit buffers appropriately, and verify timing for the -1L speed grade. This FPGA is most appropriate for fixed-format or moderately complex protocols where a dedicated low-power programmable-logic implementation is desirable and full protocol flexibility is not required.
Рекомендуется
Sensor Acquisition and Signal Conditioning
The XC6SLX16-L1FTG256I can aggregate outputs from multiple sensors and perform parallel filtering, scaling, calibration, and timestamp operations. Its 186 I/O are useful for connecting multiplexed converters, digital sensors, reference signals, and control lines, while 589,824 bits of block RAM can implement circular acquisition buffers or moving averages. Fixed-point datapaths built from the 14,579 logic cells can process several channels concurrently and reduce the data presented to an upstream processor. For accurate acquisition, engineers must establish input voltage thresholds, bank supply requirements, sampling relationships, and clock-domain crossings in addition to checking -1L timing. The device is well suited to industrial monitoring, portable instrumentation, and embedded measurement modules that need reconfigurable parallel acquisition.
Рекомендуется
Embedded Video and Display Processing
XC6SLX16-L1FTG256I can implement compact video timing, pixel movement, overlay, color processing, and display-control functions. Its 186 I/O can support parallel pixel and synchronization interfaces, while configurable logic resources perform pipeline stages and its 589,824 block-RAM bits provide line buffers or small frame-history structures. Because the device is not characterized here as a dedicated video processor, system-level constraints such as pixel rate, video timing, and memory bandwidth must be evaluated explicitly. The -1L grade should be selected only after the pixel-processing pipeline meets its timing requirements at the lower-power performance class. Compact displays, industrial monitors, camera-control blocks, and embedded visualization systems can benefit from consolidating several fixed video functions into one programmable device.
Рекомендуется
Aerospace and Defense Support Logic
The XC6SLX16-L1FTG256I can serve as a configurable digital support device in aerospace, defense, and rugged embedded subsystems when its operating limits, qualification status, and radiation requirements are independently verified. The 14,579 logic cells support command decoding, telemetry packing, redundant control paths, and built-in test logic, while 186 I/O accommodate interfaces to sensors, memory, and data-conversion equipment. Its 589,824 bits of block RAM can support telemetry staging and deterministic buffering. The industrial suffix must not be treated as evidence of aerospace qualification, and design approval should include the applicable AMD documentation, environmental testing, and organizational certification requirements. This use case is appropriate only when engineering teams establish the required assurance and qualification evidence.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC6SLX16-L1FTG256I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC6SLX16-2FTG256I | XC6SLX16-3FTG256I | XC6SLX16-2FTG256C | XC6SLX9-2FTG256I | XC6SLX25-2FTG256I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 256-ball FT BGA | 256-ball FT BGA | 256-ball FT BGA | 256-ball FT BGA | 256-ball FT BGA | 256-ball FT BGA |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Performance Grade | -1L | -2 | -3 | -2 | -2 | -2 |
| Temperature Suffix | Industrial (I) | Industrial (I) | Industrial (I) | Commercial (C) | Industrial (I) | Industrial (I) |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Configuration Compatibility | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Special Feature | -1L low-power performance grade | -2 performance grade | -3 performance grade | -2 commercial-temperature option | Lower-density -2 option | Higher-density -2 option |
Ключевые отличия
- Lower-power -1L performance grade within the Spartan-6 LX family (против XC6SLX16-2FTG256I)
- Exact industrial XC6SLX16 density and package combination (против XC6SLX9-2FTG256I)
- Industrial temperature option with the required Spartan-6 LX density (против XC6SLX16-2FTG256C)
- Higher-density alternative remains footprint-compatible (против XC6SLX25-2FTG256I)
Заметки по проектированию
Use the AMD Spartan-6 FTG256 package files for the exact XC6SLX16 device rather than generating PCB geometry from a generic BGA drawing. Review every ball as either an assigned I/O, power, ground, configuration function, or no-connect. Place configuration access, test, and reset signals so production programming and boundary-scan operations remain accessible. Because Spartan-6 LX devices can differ in available I/O even when they use the same package family, verify the final pin assignment against the selected MPN before releasing the board files.
Create the power tree from the device-specific DS162 supply requirements and the PCB power-design guidance. Separate the 1 V core rail from bank and I/O supplies, and keep high-current return paths short and directly connected to the appropriate ground planes. Validate voltage sequencing, startup current, and regulator tolerance with realistic switching activity. The -1L option may reduce power relative to faster grades, but it does not justify omitting current-limit, startup, or thermal-margin analysis.
Estimate junction temperature using the actual configured activity factor, core voltage, I/O load, ambient temperature, and the package thermal data. A 256-ball BGA provides many possible thermal-via locations, but their effectiveness depends on via diameter, plating, barrel geometry, solder wicking, and the number of connected copper layers. Spread thermal and ground vias across the FPGA region rather than concentrating them under only one corner. Confirm that the estimated junction temperature remains below the device limit at worst-case ambient and sustained operating conditions.
Do not substitute a different speed grade solely because the package names match. The target uses -1L timing characteristics, while the -2 and -3 alternatives have different performance classes; a bitstream and timing report must identify the exact selected device. Likewise, the FT256 and FTG256 identifiers should not be treated as interchangeable without package and pin-map verification. Validate configuration pin settings, bank supplies, unused balls, timing closure, and temperature suitability before authorizing a replacement.
Информация о соответствии
No explicit compliance declaration for this exact MPN was identified. The industrial suffix is a temperature designation and does not establish AEC-Q100 qualification, RoHS compliance, or other regulatory status.