XC7A75T-L2FGG484E - 28nm Artix-7 FPGA 75520 Cells | AMD
Артикул: XC7A75T-L2FGG484E ✓ АктивенXC7A75T-L2FGG484E Обзор
A field-programmable gate array, or FPGA, is a semiconductor device whose logic, interconnect, and signal-processing functions are configured after fabrication. An Artix-7 FPGA belongs to the FPGA and CPLD hierarchy and provides programmable hardware acceleration where a microprocessor or microcontroller would otherwise require external logic, repeated software execution, or additional peripherals. The XC7A75T family is positioned for designs that need substantial parallel processing without the resource level of larger FPGA families.
The XC7A75T device provides 75,520 programmable logic cells, 3,780 Kb of block RAM, 180 DSP slices, and 285 I/O. Its 1 V core operating supply supports modern high-performance FPGA fabrics, while the FGG484 package provides a 23 mm by 23 mm surface-mount footprint for systems requiring high I/O density. The L2 speed grade and extended-temperature ordering suffix identify the specific performance and environmental ordering configuration.
The device architecture supports parallel datapaths, fixed-point and floating-point DSP operations, high-speed serial connectivity, and programmable I/O. These characteristics make it suitable for industrial control, communications infrastructure, instrumentation, embedded vision, and test-and-measurement platforms where deterministic hardware logic is advantageous. The 180 DSP slices can accelerate filtering, modulation, correlation, and other arithmetic pipelines without relying entirely on a general-purpose processor.
Designs using the XC7A75T-L2FGG484E should pay attention to the power budget, decoupling strategy, configuration pins, clocking architecture, and high-speed I/O implementation guidelines. A low-noise supply, proper clock distribution, and manufacturer-recommended PCB layout practices are especially important when the FPGA drives demanding external interfaces. Configuration storage, startup sequencing, and JTAG access should be planned early in the board design.
This page combines the device identity, package details, application guidance, drop-in alternatives, and engineering design notes for faster component selection. Use the Artix-7 package pinout files and device documentation when assigning every power, ground, configuration, clock, and user I/O connection.
Аналоги без доработки для XC7A75T-L2FGG484E — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC7A75T-L2FGG484E (тот же форм-фактор и посадочное место) — отличается по Device Type, Logic Cells, Package, Mounting Type, Core Supply Voltage.
XC7A75T-2FGG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A75T-2FGG484C
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A75T-3FGG484E
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A75T-1FGG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A75T-1FGG484C
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC7A75T-L2FGG484E Максимальные параметры и электрические характеристики
| Device Family | Artix-7 |
| FPGA Logic Cells | 75,520 cells |
| Programmable I/O | 285 I/O |
| Block RAM | 3,780 Kb |
| DSP Slices | 180 slices |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Корпус | 484-pin FBGA, 23 mm x 23 mm |
| Device Type | Field Programmable Gate Array (FPGA) |
| Temperature Range | 0 °C to 100 °C junction |
| Packaging | Tray |
| Статус RoHS | Compliant |
| Logic Cell Density | 75,520 programmable logic cells |
| Memory Resource | 3,780 Kb block RAM |
| Digital Signal Processing | 180 DSP slices |
| Package Pin Count | 484 pins |
| Тип монтажа | Surface Mount |
Руководство по цоколевке XC7A75T-L2FGG484E в корпусе 484 pins
Цоколевка для XC7A75T-L2FGG484E (корпус 484 pins). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC7A75T-L2FGG484E.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC7A75T-L2FGG484E подходит для 6 применениеs: Industrial Control and Automation, Communications and Packet Processing, DSP and Signal Processing, Test and Measurement Systems, Embedded Vision and Image Processing, Aerospace and Defense Control.
Industrial Control and Automation
The XC7A75T-L2FGG484E fits industrial controllers that combine extensive parallel I/O with deterministic logic. Its 285 I/O can connect sensors, actuators, motion-control signals, and field-bus interfaces, while 75,520 logic cells support multiple control paths without relying entirely on sequential processor execution. The extended-temperature E suffix is relevant to equipment operating across industrial ambient conditions. Use the FGG484 package pinout files for power, ground, configuration, and I/O placement, and verify timing closure against the selected L2 performance target.
Рекомендуется
Communications and Packet Processing
The XC7A75T-L2FGG484E is suitable for communications equipment requiring parallel packet handling, buffering, and protocol termination. Its 3,780 Kb of block RAM supports packet queues and line buffers, while the programmable fabric can implement framing, checksums, filtering, and traffic shaping in hardware. The 285 I/O provide access to multiple low-speed interfaces alongside high-speed serial transceiver resources. Power and clock planning must account for simultaneous switching, and every high-speed interface should follow AMD's Artix-7 PCB and signal-integrity guidance.
Рекомендуется
DSP and Signal Processing
The XC7A75T-L2FGG484E provides 180 DSP slices for filters, correlation, modulation, waveform generation, and fixed-point arithmetic pipelines. The 75,520-cell fabric can implement control sequencing and data movement around the DSP blocks, while 3,780 Kb of block RAM handles sample storage and coefficient access. Parallel hardware execution can provide predictable latency for signal-processing workloads. Clock-domain crossings, DSP accumulator widths, memory bandwidth, and timing closure should be evaluated during implementation with the target Vivado design flow.
Рекомендуется
Test and Measurement Systems
The XC7A75T-L2FGG484E can implement parallel acquisition, pattern generation, timing control, and real-time analysis in a test-and-measurement instrument. Its 75,520 logic cells allow multiple channels of control and data processing, while 180 DSP slices accelerate filtering and demodulation. The 285 I/O support instrument control buses, triggers, status signals, and front-end connections. Designers should separate analog-sensitive areas from switching logic, use controlled clocking, and validate the power integrity of the FBGA-484 assembly before high-speed operation.
Рекомендуется
Embedded Vision and Image Processing
The XC7A75T-L2FGG484E is suitable for embedded image-processing pipelines where parallel pixel operations must be performed with predictable latency. The DSP slices can accelerate filtering and arithmetic stages, while block RAM stores line buffers and temporary image data. Its 285 I/O can connect image sensors, capture logic, and display or processing interfaces. Clock-rate, memory bandwidth, and video-timing constraints determine achievable frame rate, and a complete power, thermal, and PCB signal-integrity review is required before production deployment.
Рекомендуется
Aerospace and Defense Control
The XC7A75T-L2FGG484E can support mission-oriented digital control, telemetry, and signal-processing functions where programmable parallel logic is useful. The extended-temperature E ordering option makes it a candidate for equipment with elevated ambient or enclosure temperatures. Its 75,520 logic cells, 285 I/O, 180 DSP slices, and 3,780 Kb of block RAM enable consolidation of control and arithmetic functions. However, system qualification, radiation requirements, reliability standards, and exact operating-temperature limits must be established independently for each deployment.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC7A75T-L2FGG484E — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC7A75T-2FGG484I | XC7A75T-2FGG484C | XC7A75T-3FGG484E | XC7A75T-1FGG484I | XC7A75T-1FGG484C |
|---|---|---|---|---|---|---|
| Package | FBGA-484 (FGG484) | FBGA-484 (FGG484) | FBGA-484 (FGG484) | FBGA-484 (FGG484) | FBGA-484 (FGG484) | FBGA-484 (FGG484) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells |
| I/O Count | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O |
| Block RAM | 3,780 Kb | 3,780 Kb | 3,780 Kb | 3,780 Kb | 3,780 Kb | 3,780 Kb |
| DSP Slices | 180 slices | 180 slices | 180 slices | 180 slices | 180 slices | 180 slices |
| Speed Grade | L2 | -2 | -2 | -3 | -1 | -1 |
| Temperature Option | Extended temperature | Industrial temperature | Commercial temperature | Extended temperature | Industrial temperature | Commercial temperature |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Ключевые отличия
- Combines the L2 speed designation with the extended-temperature E suffix (против XC7A75T-2FGG484C)
- Provides higher performance ordering than the -1 grade (против XC7A75T-1FGG484I)
- Matches the extended-temperature class of the -3 option (против XC7A75T-3FGG484E)
- Delivers substantial parallel processing in a standard Artix-7 FGG484 footprint (против XC7A75T-2FGG484I)
Заметки по проектированию
Plan the core, auxiliary, and I/O supply rails as a complete power tree rather than treating the 1 V core requirement as the only load. Place the required bypass capacitors beside their associated power balls, minimize loop area, and separate switching-current paths from sensitive supplies. Validate voltage droop during configuration, high-speed I/O activity, and full DSP utilization before releasing the board layout.
The 484-pin FBGA depends heavily on its thermal design. Use the manufacturer-recommended PCB stack-up and via pattern, provide uninterrupted copper beneath the device where the package design permits, and evaluate junction temperature under the worst-case logic, I/O, and ambient conditions. A nominal board temperature alone is insufficient because local self-heating can reduce timing margin or component life.
Assign every ball using the Artix-7 FGG484 package pinout files and maintain continuous reference-plane return paths. Keep high-speed serial lanes away from noisy power and configuration activity, follow length-matching rules for the selected interface, and avoid unnecessary vias in sensitive paths. Validate escape routing, layer transitions, and connector alignment with the complete stack-up.
Use controlled clock distribution and verify every interface target against the selected speed grade and I/O standard. Configuration pins must retain their required bias states, and JTAG signals should be accessible without disrupting production programming. For interfaces with demanding edge rates, perform pre-layout and post-layout signal-integrity analysis and use the manufacturer's reference terminations and interface guidelines.
Do not treat the -1, -2, -3, and L2 speed designations as interchangeable without checking timing closure, and do not treat I, C, and E temperature suffixes as equivalent. An apparently identical FGG484 footprint can still fail qualification if the operating-temperature range or timing target changes. Review the complete ordering code and rerun implementation with the exact production MPN.
Информация о соответствии
RoHS compliance is identified in the device listing. REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification details require confirmation for the exact ordering code.