AMD

XC7Z030-L2FBG484I - 800MHz Zynq SoC FPGA | AMD

Артикул: XC7Z030-L2FBG484I ✓ Активен
1.05 V Vdss 484-pin FCBGA Package 800 MHz Speed 256 KB Memory
MOQ: 1 |

XC7Z030-L2FBG484I Обзор

The AMD XC7Z030-L2FBG484I is a Zynq-7000 Kintex-7 FPGA system-on-chip with dual Arm Cortex-A9 MPCore processors, CoreSight debug support, 125,000 logic cells, and an 800 MHz processor operating frequency. The device is supplied in a 484-pin FCBGA package measuring 23 mm by 23 mm. Its integrated architecture combines programmable logic with a hard processor system on one silicon device.

A Zynq-7000 SoC is a heterogeneous system-on-chip that places a dual-core Arm Cortex-A9 processing subsystem and programmable FPGA fabric in one package. The processor system executes operating-system-level software, while the programmable logic implements parallel datapaths, custom interfaces, accelerators, and fixed-function hardware. This integration belongs to the FPGA and SoC hierarchy and reduces component count compared with separate processors and logic devices.

The XC7Z030-L2FBG484I provides 125,000 logic cells and an 800 MHz Cortex-A9 operating frequency. The -2 designation identifies a particular device speed grade, while FBG484 identifies the 484-ball FCBGA package. The industrial-temperature I suffix and the exact package, pin, voltage, and timing requirements must be considered when replacing an existing design or selecting a new board configuration.

Technically, the device integrates the ARM Cortex-A9 MPCore processing system with CoreSight debug capabilities and Kintex-7 FPGA logic. This architecture permits software-controlled hardware behavior and allows time-critical functions to execute in programmable logic. The published operating-temperature information for this exact MPN spans -40 °C to +100 °C, while the associated product data identifies a 1.05 V maximum supply-voltage classification.

Typical uses include industrial image processing, embedded control, network-interface acceleration, sensor fusion, programmable logic subsystems, and mixed software/hardware data-processing platforms. The dual-core processor is suitable for supervisory and application software, while the FPGA fabric can accelerate parallel algorithms or provide deterministic interfaces that would be inefficient in a general-purpose processor alone.

Design planning should begin with the official package placement diagram and pinout files for XC7Z30-FBG484. Check every power rail, configuration pin, clock input, memory interface, and dedicated I/O against the target board because the 484-ball FCBGA footprint supports dense connections but requires careful escape routing, thermal management, and high-speed layout discipline.

This page combines the exact XC7Z030-L2FBG484I device identification, verified product specifications, same-package replacement options, application guidance, and package-level design considerations to support engineering selection and board-level implementation planning.

Аналоги без доработки для XC7Z030-L2FBG484I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с XC7Z030-L2FBG484I (тот же форм-фактор и посадочное место) — отличается по Logic Cells, Package, Device Type, Speed Grade, Mounting Type.

AMD
Logic Cells: Approximately 125,000 cells
Device Type: Zynq-7000 system-on-chip
Сравнить с XC7Z030-L2FBG484I →
AMD
Logic Cells: 125K
Package: 484-FCBGA (23x23 mm)
Speed Grade: -1
Сравнить с XC7Z030-L2FBG484I →
AMD
Logic Cells: 125,000
Package: 484-FCBGA (23x23 mm, 1 mm pitch)
Speed Grade: -2 (mid-tier)
Сравнить с XC7Z030-L2FBG484I →
AMD
Package: 484-FCBGA, 23 x 23 mm
Device Type: Zynq-7000 Kintex-7 system-on-chip
Speed Grade: -2
Сравнить с XC7Z030-L2FBG484I →
AMD
Logic Cells: 125000
Package: 484-FCBGA (23x23)
Сравнить с XC7Z030-L2FBG484I →

XC7Z030-2FBG484I

✅ Прямая замена
AMD
📦 FCBGA-484
Zynq-7000 · Dual ARM Cortex-A9 MPCore with CoreSight · 2 · 800 MHz · 125000 · 484-FCBGA (23x23) · -40°C to +100°C · 1.2V to 3.3V

Уточнить цену

Открыть даташит →

XC7Z030-1FBG484I

✅ Прямая замена
AMD
📦 FCBGA-484
Dual ARM Cortex-A9 MPCore with CoreSight · 667 MHz · 125K · 3.0 Mb · 400 · 484-FCBGA (23x23 mm) · -40°C to +100°C · -1

Уточнить цену

Открыть даташит →

XC7Z030-2FBG484C

✅ Прямая замена
📦 FCBGA-484
Retains the -2 speed grade and 484-ball FCBGA package; the C temperature suffix differs from the target's I suffix

📋 Справочный аналог (нет в каталоге)

XC7Z030-1FBG484C

✅ Прямая замена ⚠️ Характеристики не проверены
AMD
📦 FCBGA-484
Zynq-7000 system-on-chip · Dual ARM Cortex-A9 MPCore · 667 MHz · 32-bit ARM · CoreSight · Kintex-7 · Approximately 125,000 cells · 484-FCBGA

Уточнить цену

Открыть даташит →

XC7Z030-2FBG484E

✅ Прямая замена ⚠️ Характеристики не проверены
AMD
📦 FCBGA-484
Zynq-7000 Kintex-7 system-on-chip · Dual Arm Cortex-A9 MPCore · 800 MHz · 125K logic cells · 400 DSP slices · CoreSight · Supported · 484-FCBGA, 23 x 23 mm

Уточнить цену

Открыть даташит →

XC7Z030-L2FBG484I Максимальные параметры и электрические характеристики

Device Type Zynq-7000 Kintex-7 FPGA system-on-chip
Processor Core Dual Arm Cortex-A9 MPCore
Processor Operating Frequency 800 MHz
Logic Cells 125,000 cells
Programmable Logic Family Kintex-7
Architecture Heterogeneous ARM processor and FPGA SoC
Debug Support CoreSight
Technology 28 nm
Maximum Supply Voltage 1.05 V
Рабочая температура -40 °C to +100 °C
Package Type 484-pin FCBGA
Package Dimensions 23 mm x 23 mm
Device Speed Grade -2
Temperature Grade Suffix I
Тип монтажа Surface mount
Packaging Form Tray
Embedded Memory Capacity 256 KB
Статус RoHS Compliant
Число выводов 484 balls

Руководство по цоколевке XC7Z030-L2FBG484I в корпусе 23 mm x 23 mm

Цоколевка для XC7Z030-L2FBG484I (корпус 23 mm x 23 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 23 mm x 23 mm для XC7Z030-L2FBG484I

Нет подробных данных о распиновке для XC7Z030-L2FBG484I.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

XC7Z030-L2FBG484I подходит для 6 применениеs: Industrial Machine Vision, Network Packet Acceleration, Embedded Sensor Fusion, Programmable Logic Control, Data Acquisition and Signal Processing, Secure Communications Gateway.

🏭

Industrial Machine Vision

The XC7Z030-L2FBG484I fits industrial machine-vision systems that need flexible sensor timing and parallel image processing. Its dual Arm Cortex-A9 MPCore processors at 800 MHz can manage control software, configuration, and communication, while the 125,000-cell Kintex-7 fabric can accelerate pixel pipelines, thresholding, filtering, or camera-interface logic. The -40 °C to +100 °C listed operating range supports industrial environments where temperature variation is expected. Keep high-speed memory and image-sensor interfaces within the device's published timing constraints, and use the package placement diagram when assigning all 484 BGA connections.

🌐

Network Packet Acceleration

The XC7Z030-L2FBG484I is suitable for network equipment that divides control-plane software between the dual Cortex-A9 cores and data-plane processing between programmable-logic blocks. The 125,000 logic cells can implement parallel classification, filtering, queuing, or protocol functions where deterministic throughput is more important than sequential software execution. Its listed 800 MHz processor frequency supports network-control applications, while CoreSight provides integrated processor debug capability. Power estimation and high-speed memory-interface implementation must be based on the actual switching activity, clock rates, and I/O loading of the final design.

🧩

Embedded Sensor Fusion

The XC7Z030-L2FBG484I supports embedded sensor-fusion designs that combine control software with hardware-assisted signal processing. The Arm Cortex-A9 subsystem can execute configuration, calibration, and supervisory algorithms, while the Kintex-7 fabric can implement fixed-latency filtering, interpolation, or parallel data alignment. Its 125,000 logic cells provide meaningful parallel-processing capacity without requiring the same amount of sequential code as a processor-only implementation. The industrial I temperature classification is relevant to deployed systems expected to operate from -40 °C to +100 °C, subject to correct power regulation, thermal design, and qualification of the assembled board.

⚡

Programmable Logic Control

The XC7Z030-L2FBG484I fits control systems requiring software flexibility alongside hardware-level timing control. The dual 800 MHz Arm Cortex-A9 cores can execute real-time operating-system software, state logic, diagnostics, and communications, while the Kintex-7 fabric can service deterministic timing or peripheral-control tasks. This division of labor can reduce the burden on sequential software for workloads with many parallel operations. The -2 speed grade and industrial suffix should be selected only after checking the timing margin of the -1 alternative and confirming the required temperature range. PCB implementation requires careful BGA escape routing, decoupling, clock distribution, and power sequencing.

📊

Data Acquisition and Signal Processing

The XC7Z030-L2FBG484I is useful in data-acquisition systems where sensor streams must be collected, conditioned, and processed under software control. The FPGA fabric can implement parallel ADC interfaces, digital filtering, correlation, or buffering, while the dual Cortex-A9 processors perform calibration, configuration, analysis, and data transfer. Its combination of 125,000 logic cells and an 800 MHz ARM processing subsystem supports a clear hardware/software partition in compact embedded platforms. Designers should use the manufacturer power data with the actual converter count, sample rate, memory traffic, and logic utilization, since conversion and accelerator activity materially affect the thermal and power budget.

🖥️

Secure Communications Gateway

The XC7Z030-L2FBG484I can support a communications gateway that combines a software-controlled protocol stack with FPGA-based packet handling or cryptographic acceleration. The dual Arm Cortex-A9 cores are suited to networking stacks and management functions, while the 125,000-cell logic fabric can accelerate parallel data movement or hardware-assisted security operations. CoreSight assists with processor-level debugging, and the industrial temperature grade covers the listed -40 °C to +100 °C operating range. Production use requires careful partitioning of fixed and programmable functions, review of the device's security capabilities, validation of memory interfaces, and testing of the complete power and thermal design across worst-case traffic loads.

What are the key specifications of XC7Z030-L2FBG484I that engineers should know?
The XC7Z030-L2FBG484I is an 800 MHz Zynq-7000 SoC FPGA with 125,000 logic cells and dual Arm Cortex-A9 MPCore processors in a 484-pin FCBGA package. According to the AMD Zynq-7000 data sheet, the device belongs to the Kintex-7 programmable-logic family and includes CoreSight debug support. Its listed operating-temperature range is -40 °C to +100 °C, while its maximum supply-voltage classification is 1.05 V.
Where can I download the XC7Z030-L2FBG484I datasheet PDF?
The XC7Z030-L2FBG484I data sheet is available through the official AMD documentation portal for the Zynq-7000 SoC family. The document covers the XC7Z030 and related devices, while the separate Zynq-7000 package pinout page provides the package files needed to assign PCB connections. Use the AMD document for electrical and architectural details and the package placement material to verify the 484-ball FCBGA land pattern.
Where can I find the XC7Z030-L2FBG484I pinout and package placement diagram?
The official AMD Zynq-7000 package-pinout resource provides downloadable package files for the XC7Z30-FBG484 device, and AMD also publishes an XC7Z30-FBG484 package placement diagram. These resources should be used to verify the 484-ball assignments, power pins, and PCB footprint. Do not derive a production pinout solely from a distributor product image because BGA balls cannot be identified reliably from an external package view.
What can replace the XC7Z030-L2FBG484I?
The closest drop-in candidates retain the XC7Z030 device, FBG484 package, and either the -1 or -2 speed designation. XC7Z030-2FBG484I and XC7Z030-1FBG484I change one documented grade dimension, while XC7Z030-2FBG484C and XC7Z030-2FBG484E change the temperature-class suffix. Verify timing closure, temperature requirements, power sequencing, and lifecycle status before approving any substitution.
Is XC7Z030-2FBG484I the same as XC7Z030-L2FBG484I?
XC7Z030-2FBG484I and XC7Z030-L2FBG484I share the XC7Z030 device identity, -2 speed designation, and FBG484 package, but their ordering suffixes indicate different temperature classes. The target MPN includes the industrial I suffix, whereas XC7Z030-2FBG484I does not. Confirm the required commercial, industrial, or extended temperature grade in the AMD device documentation before treating them as equivalent.
When should I choose XC7Z030-L2FBG484I over XC7Z030-1FBG484I?
Choose XC7Z030-L2FBG484I when the design requires the higher -2 performance grade and operates across the target part's documented -40 °C to +100 °C industrial range. XC7Z030-1FBG484I retains the same 484-ball package and major SoC architecture but uses the slower -1 grade. The correct choice depends on the design's timing margin, temperature requirement, and system clock plan rather than package appearance alone.
Is XC7Z030-L2FBG484I suitable for an industrial embedded control system?
The XC7Z030-L2FBG484I is suitable for industrial embedded control when its -40 °C to +100 °C temperature range, -2 performance grade, and 484-pin FCBGA package satisfy the system requirements. Its dual Cortex-A9 processors can run control software, while the 125,000-cell Kintex-7 fabric can implement parallel logic or hardware accelerators. Industrial qualification beyond operating temperature, such as AEC-Q100 status, should be confirmed separately.
What is the difference between XC7Z030-L2FBG484I and XC7Z030-1FBG484I?
The principal documented difference is the device speed grade: XC7Z030-L2FBG484I uses the -2 grade, while XC7Z030-1FBG484I uses the -1 grade. Both retain the XC7Z030 SoC architecture, 125,000 logic cells, 800 MHz listed processor frequency, and FBG484 package family. A replacement still requires timing analysis because changing the speed grade can alter achievable clock rates and setup margin.
What is the best AMD equivalent for XC7Z030-L2FBG484I?
The closest AMD-family equivalent is XC7Z030-2FBG484I because it retains the XC7Z030 device, -2 speed grade, and FBG484 package. The key engineering distinction is the ordering suffix, which selects a different temperature class from the target's industrial I version. Use the AMD Zynq-7000 data sheet and package files to confirm grade requirements, then rerun timing and environmental qualification before substitution.
How much power does the XC7Z030-L2FBG484I consume?
The XC7Z030-L2FBG484I power consumption depends on the selected power rails, processor utilization, programmable-logic activity, I/O loading, junction temperature, and operating frequency, so one fixed total cannot represent every design. The listed 1.05 V maximum supply-voltage classification identifies the device's supply class. Use the AMD power-estimation methodology with the actual clock, utilization, and I/O assumptions before assigning regulators or designing board cooling.
Where can I buy XC7Z030-L2FBG484I online?
Use the Request a Quote form on this page to request availability and a current quotation for XC7Z030-L2FBG484I. The form allows the requester to specify quantity, packaging, and delivery requirements without relying on a static listing. Confirm the manufacturer ordering code, tray packaging, and target quantity when submitting the request.
What is the price of XC7Z030-L2FBG484I?
The current XC7Z030-L2FBG484I quotation is handled through the Request a Quote form on this page. Submit the required quantity, delivery destination, and packaging preference so the commercial offer can reflect the current market and exact MPN. The form avoids presenting a stale unit price as current inventory information.
What is the lead time and stock status for XC7Z030-L2FBG484I?
Current stock and lead-time information for XC7Z030-L2FBG484I should be requested through the Request a Quote form on this page. Include the required order quantity and whether the standard FCBGA tray presentation is acceptable. Procurement should not infer availability from a generic catalog page because programmable-device inventory and lifecycle conditions can change by package and ordering suffix.
What tools are compatible with XC7Z030-L2FBG484I?
XC7Z030-L2FBG484I is supported within the AMD Zynq-7000 programmable-device tool flow, including the hardware design entry, bitstream generation, programming, and processor-debug processes described by AMD. The exact software release and device support should be matched to the deployed design and board configuration. Use the AMD package pinout and UG865 guidance to confirm ball assignments and package-device files.
Is XC7Z030-L2FBG484I RoHS compliant?
The product listing for XC7Z030-L2FBG484I identifies the device as RoHS compliant. RoHS compliance addresses restricted substances in the component and does not by itself establish REACH, AEC-Q100, halogen-free, or conflict-minerals status. Those separate requirements should be confirmed against the current AMD product documentation and the procurement specification before release.

Справочные инженерные данные для XC7Z030-L2FBG484I — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose XC7Z030-L2FBG484I for a Zynq-7000 design that requires both the 125,000-cell Kintex-7 fabric and the dual 800 MHz Arm Cortex-A9 subsystem, particularly when the -2 speed grade and industrial I suffix are required. Choose XC7Z030-2FBG484I when the same -2 grade and package are needed but the environmental requirement is compatible with the suffix selected for that ordering code. Choose XC7Z030-1FBG484I only after timing closure confirms that the slower -1 grade meets the design margin and the industrial temperature suffix remains acceptable. XC7Z030-2FBG484C and XC7Z030-2FBG484E are useful same-package alternatives only when their respective temperature classes satisfy the deployment requirement. Options such as FFG676, SBG485, and other package families are not drop-in choices because their footprints differ.

Сравнение с аналогами

Параметр Этот товар XC7Z030-2FBG484I XC7Z030-1FBG484I XC7Z030-2FBG484C XC7Z030-1FBG484C XC7Z030-2FBG484E
Brand AMD AMD AMD AMD AMD AMD
Package FCBGA-484 FCBGA-484 FCBGA-484 FCBGA-484 FCBGA-484 FCBGA-484
Device Family Zynq-7000 SoC Zynq-7000 SoC Zynq-7000 SoC Zynq-7000 SoC Zynq-7000 SoC Zynq-7000 SoC
Speed Grade -2 -2 -1 -2 -1 -2
Temperature Suffix I I I C C E
Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm

Ключевые отличия

  • Combines programmable logic and dual-core processor control in one SoC (против XC7A50T-L2FGG484E)
  • Higher performance grade within the same FBG484 footprint (против XC7Z030-1FBG484I)
  • Exact industrial suffix alignment (против XC7Z030-2FBG484C)
  • Pin-compatible capacity to consolidate processor and logic functions (против XC7Z030-2FBG484I)

Заметки по проектированию

Use the official XC7Z30-FBG484 package placement diagram and package-device pinout files before releasing PCB artwork. Verify all 484 BGA assignments, including power, ground, configuration, clocks, memory interfaces, and dedicated I/O. Place decoupling and power-plane structures according to the AMD power guidelines, and preserve escape-routing access for every power ball because a BGA footprint offers little room for via redirection.

Do not assign a single supply-current value to the XC7Z030-L2FBG484I. Estimate the processor, FPGA fabric, memory-interface, and I/O loads separately using the AMD power-estimation flow. The listed 1.05 V maximum supply-voltage classification identifies the supply class but does not establish the full design current. Include startup transients, power-supply tolerance, sequencing, and worst-case logic activity when sizing regulators and the board's power distribution network.

Estimate junction temperature from actual FPGA utilization, processor activity, I/O toggling, ambient conditions, and the exposed-area thermal path available on the assembled board. Do not rely on a generic package thermal figure because FCBGA performance depends strongly on PCB copper, via structure, enclosure conditions, and neighboring heat sources. Validate the worst-case operating mode with thermal simulation and board-level measurements before defining the system's maximum ambient temperature.

Review each high-speed memory and serial interface against the selected device speed grade and board topology. A move from -2 to -1 can affect timing margin even when the package is unchanged, while changing only the temperature suffix can alter the valid environmental envelope. Use source-synchronous routing rules, length matching, reference planes, and the manufacturer's interface constraints, then complete post-route timing and signal-integrity sign-off.

Do not treat similar XC7Z030 ordering codes as unconditional substitutions. The speed suffix, temperature suffix, package, package revision, and lifecycle requirements must all be checked. In particular, FBG484, FFG676, SBG485, and other package codes cannot replace one another without a PCB redesign, even though the listed processor frequency and logic capacity may be identical.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

RoHS compliance is identified for the exact MPN. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals information was not established for this ordering code.

Данные проверены: 2026-11-18 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

xc7z030 2ffg676i xc7z030 1ffg676i xc7z030 1fbg676i xc7z030 2fbg676i xc7z030 1sbg485i xc7z030 2sbg485i xc7z030 2fbg484i xc7z030 1fbg484i XC7Z030-L2FBG484I datasheet XC7Z030-L2FBG484I pinout

Связанные компоненты & термины

AMD XC7Z030-L2FBG484I XC7Z030-2FBG484I XC7Z030-1FBG484I XC7Z030-2FBG484C XC7Z030-1FBG484C XC7Z030-2FBG484E Zynq-7000 Kintex-7 FPGA system-on-chip SoC Arm Cortex-A9 MPCore CoreSight FCBGA-484 BGA surface mount 125000 logic cells 800 MHz 28 nm industrial temperature grade hardware acceleration RoHS
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ