XC7K160T-L2FFG676E - 162K Logic Cell Kintex-7 FPGA | AMD
Артикул: XC7K160T-L2FFG676E ✓ АктивенXC7K160T-L2FFG676E Обзор
A Kintex-7 FPGA is a configurable digital semiconductor whose interconnect, logic blocks, block RAM, DSP resources, and I/O can be programmed after manufacture. Within the FPGA hierarchy, it belongs to the 7 Series programmable-logic family and provides substantially more parallel processing capacity than fixed-function logic devices. This makes the XC7K160T suitable for systems that combine high-throughput data paths with custom control logic, parallel algorithms, or hardware-assisted acceleration.
The XC7K160T family provides 162,240 logic cells and approximately 12,675 configurable logic blocks. Its 11,700 Kb of block RAM supports packet buffering, data-width conversion, local storage, and digital filtering. The FFG676 configuration exposes 400 user I/O, enabling dense connections to DDR memory, transceivers, clocks, data converters, and parallel peripherals. The -2L designation identifies a lower-power speed grade within the Kintex-7 portfolio.
The 28 nm architecture combines programmable logic with dedicated DSP blocks and selectable block RAM for high-throughput signal-processing designs. Its 400 I/O make external memory and high-pin-count interface implementation practical on a single device. Designers must nevertheless assign banks carefully to compatible supply voltages and observe the package-specific power, decoupling, and ball-map requirements described by AMD documentation.
Typical applications include industrial control and automation, networking and packet processing, test and measurement, high-speed data acquisition, communications infrastructure, embedded vision, and signal-processing subsystems. The large logic capacity supports parallel lanes and buffering, while the -2L grade is appropriate when power consumption is more important than the maximum performance of the -3 grade.
Place decoupling capacitors close to the appropriate supply balls, keep high-speed routing short, and separate sensitive clock and reference connections from demanding switching nodes. Before board release, verify the selected FPGA part, package ball map, memory topology, bank voltages, configuration interface, thermal conditions, and I/O standards against the AMD package and design documentation.
This product page combines verified device specifications, family-level replacement analysis, and practical FPGA design guidance. It also distinguishes exact FFG676 drop-in options from other Kintex-7 package variants so engineers can distinguish electrical and thermal ordering changes from changes requiring a PCB redesign.
Аналоги без доработки для XC7K160T-L2FFG676E — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC7K160T-L2FFG676E (тот же форм-фактор и посадочное место) — отличается по Package, Speed Grade, Logic Cells, Block RAM, DSP Slices.
XC7K160T-3FFG676E
✅ Прямая заменаУточнить цену
Открыть даташит →XC7K160T-2FFG676C
✅ Прямая заменаУточнить цену
Открыть даташит →XC7K160T-2FFG676I
✅ Прямая заменаУточнить цену
Открыть даташит →XC7K160T-1FFG676I
✅ Прямая заменаУточнить цену
Открыть даташит →XC7K160T-L2FFG676E Максимальные параметры и электрические характеристики
| Device Type | Kintex-7 field-programmable gate array |
| Logic Cells | 162,240 cells |
| Configurable Logic Blocks | 12,675 CLBs |
| Block RAM | 11,700 Kb |
| User I/O | 400 I/O |
| Technology | 28 nm CMOS |
| Core Voltage | 1 V |
| Speed Grade | -2L |
| Корпус | 676-ball FCBGA, FFG676 |
| Package Ball Count | 676 balls |
| Programmable Logic Architecture | Configurable logic blocks and programmable routing |
| Тип монтажа | Surface mount |
Руководство по цоколевке XC7K160T-L2FFG676E в корпусе 676 balls
Цоколевка для XC7K160T-L2FFG676E (корпус 676 balls). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC7K160T-L2FFG676E.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC7K160T-L2FFG676E подходит для 6 применениеs: Industrial Automation and Motion Control, Networking and Packet Processing, High-Speed Data Acquisition, Test and Measurement Instrumentation, Communications Infrastructure, Embedded Signal Processing.
Industrial Automation and Motion Control
The XC7K160T-L2FFG676E fits industrial controllers that combine deterministic sequencing with substantial parallel I/O. Its 162,240 logic cells can implement motion-control logic, machine-state supervision, safety interlocks, and communication protocols, while 400 user I/O reduce the need for external logic devices. The -2L grade is useful when lower static and dynamic power are more important than maximum -3 timing performance. Designers should partition I/O into banks with compatible voltage standards, isolate clock and reset distribution, and validate timing for the selected -2L conditions. The package pinout files must be used for every FFG676 signal and supply connection.
Рекомендуется
Networking and Packet Processing
The XC7K160T-L2FFG676E can implement high-throughput networking functions where parallel packet classification, buffering, and protocol handling must coexist in one device. Its 11,700 Kb of block RAM provides local packet queues and data staging, and 162,240 logic cells support multiple pipeline stages. The 400-I/O FFG676 package simplifies connections to external memory and high-speed network interfaces. For production designs, constrain interfaces to the appropriate speed grade, register wide data paths, and reserve memory bandwidth for timing closure. The -2L grade should be selected only after confirming that its power and timing characteristics satisfy throughput and thermal targets.
Рекомендуется
High-Speed Data Acquisition
The XC7K160T-L2FFG676E is suitable for parallel acquisition systems that must capture, filter, and transform multiple data streams. Its 400 user I/O provide direct access to parallel sensors, converters, and digital interfaces, while 11,700 Kb of block RAM can absorb bursts and support local buffering between acquisition and processing stages. Programmable logic and DSP resources allow filters, counters, and channel-specific processing to be integrated without a separate processor. Place acquisition interfaces according to bank voltage rules, use clock-capable pins for critical clocks, and validate input timing against the -2L speed grade. Board signal-integrity testing remains necessary for high-edge-rate interfaces.
Рекомендуется
Test and Measurement Instrumentation
The XC7K160T-L2FFG676E supports programmable test systems that coordinate stimulus generation, response capture, analysis, and instrument control. Its 162,240 logic cells can implement multiple digital channels, timing engines, or protocol engines, while 11,700 Kb of block RAM supports captured waveforms and sample buffers. The 400-I/O package allows flexible connection to test-card interfaces and control buses. For deterministic results, use dedicated clock resources, constrain all acquisition and stimulus paths, and reserve sufficient logic for timing checks. Because the -2L grade trades maximum performance for lower power, verify that acquisition bandwidth and output timing remain adequate before using the part in a performance-critical instrument.
Рекомендуется
Communications Infrastructure
The XC7K160T-L2FFG676E can serve as the programmable fabric in communications equipment requiring parallel lanes, dedicated buffering, and flexible protocol support. Its block RAM supports channel buffering and payload alignment, while the large logic capacity allows line-rate transforms and supervisory functions to be combined. The 400 user I/O provide a high connection count for parallel backplanes, digital transceivers, and timing references. Engineers should establish deterministic clocking, use pipelined I/O paths, and keep high-fanout control signals registered or buffered. Because package variant substitutions can alter speed and temperature characteristics, validate the exact ordering suffix with the final system timing and environmental requirements.
Рекомендуется
Embedded Signal Processing
The XC7K160T-L2FFG676E supports embedded DSP pipelines that require both arithmetic resources and flexible surrounding control logic. Dedicated DSP blocks can accelerate filters, transforms, and multiply-accumulate operations, while 11,700 Kb of block RAM handles coefficient storage, circular buffers, and channel data. The 400-I/O FFG676 package is useful for parallel converter or digital-array interfaces that would otherwise consume scarce board area. Keep DSP clocking and data paths deterministic, inspect DSP-to-logic timing at the -2L grade, and avoid routing critical interfaces across long power or switching regions. The lower-power -2L grade can improve system efficiency when the arithmetic pipeline does not require the maximum timing of the -3 option.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC7K160T-L2FFG676E — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC7K160T-3FFG676E | XC7K160T-2FFG676C | XC7K160T-2FFG676I | XC7K160T-1FFG676I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | FFG676 | FFG676 - same | FFG676 - same | FFG676 - same | FFG676 - same |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Block RAM | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O |
| Speed Grade | -2L | -3 | -2 | -2 | -1 |
| Temperature Suffix | E | E | C | I | I |
| Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V |
Ключевые отличия
- Lower-power speed-grade choice within the same FFG676 footprint (против XC7K160T-3FFG676E)
- Retains 162,240 logic cells and 400 I/O for direct board migration (против XC7K160T-1FFG676I)
- Same-package selection without changing the 676-ball PCB land pattern (против XC7K160T-2FFG676C)
Заметки по проектированию
Use the AMD power-estimation methodology with the exact -2L operating conditions, implemented design, I/O standards, and estimated activity factor. Do not substitute a generic 7 Series power value. Decoupling and bank-supply connections must follow the official FFG676 package data, while unused configuration and supply balls must be connected exactly as directed. Validate the power-up sequence and programmable supply ramp behavior in hardware before releasing the board.
Assign every FFG676 ball from the official package file rather than a generic BGA-676 symbol. Check configuration pins, clock-capable pins, supply and ground balls, voltage banks, and exposed package connections individually. Keep high-speed routing short, provide continuous return paths, and place decoupling close to the relevant supply balls. A footprint that is geometrically similar can still be electrically incorrect if its ball map or thermal-pad implementation differs.
Estimate junction temperature from actual logic utilization, I/O toggle activity, core voltage, ambient temperature, airflow, and PCB thermal resistance. The -2L grade can reduce power relative to the -3 option, but that does not eliminate thermal validation. Use the final board stack-up and enclosure, preserve the intended thermal paths, and test worst-case operating modes. A heatsink recommendation requires completed power and ambient-temperature analysis rather than the FPGA MPN alone.
Информация о соответствии
The AMD Kintex-7 datasheet listing does not establish the exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this ordering code. Obtain current AMD compliance or qualification documentation before using the part in a regulated application.