XC7K160T-L2FFG676E - 162K Logic Cell Kintex-7 FPGA | AMD
MPN: XC7K160T-L2FFG676E ✓ 啟用中XC7K160T-L2FFG676E 概覽
A Kintex-7 FPGA is a configurable digital semiconductor whose interconnect, logic blocks, block RAM, DSP resources, and I/O can be programmed after manufacture. Within the FPGA hierarchy, it belongs to the 7 Series programmable-logic family and provides substantially more parallel processing capacity than fixed-function logic devices. This makes the XC7K160T suitable for systems that combine high-throughput data paths with custom control logic, parallel algorithms, or hardware-assisted acceleration.
The XC7K160T family provides 162,240 logic cells and approximately 12,675 configurable logic blocks. Its 11,700 Kb of block RAM supports packet buffering, data-width conversion, local storage, and digital filtering. The FFG676 configuration exposes 400 user I/O, enabling dense connections to DDR memory, transceivers, clocks, data converters, and parallel peripherals. The -2L designation identifies a lower-power speed grade within the Kintex-7 portfolio.
The 28 nm architecture combines programmable logic with dedicated DSP blocks and selectable block RAM for high-throughput signal-processing designs. Its 400 I/O make external memory and high-pin-count interface implementation practical on a single device. Designers must nevertheless assign banks carefully to compatible supply voltages and observe the package-specific power, decoupling, and ball-map requirements described by AMD documentation.
Typical applications include industrial control and automation, networking and packet processing, test and measurement, high-speed data acquisition, communications infrastructure, embedded vision, and signal-processing subsystems. The large logic capacity supports parallel lanes and buffering, while the -2L grade is appropriate when power consumption is more important than the maximum performance of the -3 grade.
Place decoupling capacitors close to the appropriate supply balls, keep high-speed routing short, and separate sensitive clock and reference connections from demanding switching nodes. Before board release, verify the selected FPGA part, package ball map, memory topology, bank voltages, configuration interface, thermal conditions, and I/O standards against the AMD package and design documentation.
This product page combines verified device specifications, family-level replacement analysis, and practical FPGA design guidance. It also distinguishes exact FFG676 drop-in options from other Kintex-7 package variants so engineers can distinguish electrical and thermal ordering changes from changes requiring a PCB redesign.
直接替換替代品,適用於 XC7K160T-L2FFG676E — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7K160T-L2FFG676E (相同外形與佔位) — 差異在於 Package, Speed Grade, Logic Cells, Block RAM, DSP Slices.
XC7K160T-3FFG676E
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-2FFG676C
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-2FFG676I
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-1FFG676I
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-L2FFG676E 最大額定值與電氣特性
| Device Type | Kintex-7 field-programmable gate array |
| Logic Cells | 162,240 cells |
| Configurable Logic Blocks | 12,675 CLBs |
| Block RAM | 11,700 Kb |
| User I/O | 400 I/O |
| Technology | 28 nm CMOS |
| Core Voltage | 1 V |
| Speed Grade | -2L |
| 封裝 | 676-ball FCBGA, FFG676 |
| Package Ball Count | 676 balls |
| Programmable Logic Architecture | Configurable logic blocks and programmable routing |
| 安裝類型 | Surface mount |
XC7K160T-L2FFG676E 676 balls 腳位配置指南
XC7K160T-L2FFG676E(676 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7K160T-L2FFG676E.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7K160T-L2FFG676E 適用於 6 應用s: Industrial Automation and Motion Control, Networking and Packet Processing, High-Speed Data Acquisition, Test and Measurement Instrumentation, Communications Infrastructure, Embedded Signal Processing.
Industrial Automation and Motion Control
The XC7K160T-L2FFG676E fits industrial controllers that combine deterministic sequencing with substantial parallel I/O. Its 162,240 logic cells can implement motion-control logic, machine-state supervision, safety interlocks, and communication protocols, while 400 user I/O reduce the need for external logic devices. The -2L grade is useful when lower static and dynamic power are more important than maximum -3 timing performance. Designers should partition I/O into banks with compatible voltage standards, isolate clock and reset distribution, and validate timing for the selected -2L conditions. The package pinout files must be used for every FFG676 signal and supply connection.
推薦
Networking and Packet Processing
The XC7K160T-L2FFG676E can implement high-throughput networking functions where parallel packet classification, buffering, and protocol handling must coexist in one device. Its 11,700 Kb of block RAM provides local packet queues and data staging, and 162,240 logic cells support multiple pipeline stages. The 400-I/O FFG676 package simplifies connections to external memory and high-speed network interfaces. For production designs, constrain interfaces to the appropriate speed grade, register wide data paths, and reserve memory bandwidth for timing closure. The -2L grade should be selected only after confirming that its power and timing characteristics satisfy throughput and thermal targets.
推薦
High-Speed Data Acquisition
The XC7K160T-L2FFG676E is suitable for parallel acquisition systems that must capture, filter, and transform multiple data streams. Its 400 user I/O provide direct access to parallel sensors, converters, and digital interfaces, while 11,700 Kb of block RAM can absorb bursts and support local buffering between acquisition and processing stages. Programmable logic and DSP resources allow filters, counters, and channel-specific processing to be integrated without a separate processor. Place acquisition interfaces according to bank voltage rules, use clock-capable pins for critical clocks, and validate input timing against the -2L speed grade. Board signal-integrity testing remains necessary for high-edge-rate interfaces.
推薦
Test and Measurement Instrumentation
The XC7K160T-L2FFG676E supports programmable test systems that coordinate stimulus generation, response capture, analysis, and instrument control. Its 162,240 logic cells can implement multiple digital channels, timing engines, or protocol engines, while 11,700 Kb of block RAM supports captured waveforms and sample buffers. The 400-I/O package allows flexible connection to test-card interfaces and control buses. For deterministic results, use dedicated clock resources, constrain all acquisition and stimulus paths, and reserve sufficient logic for timing checks. Because the -2L grade trades maximum performance for lower power, verify that acquisition bandwidth and output timing remain adequate before using the part in a performance-critical instrument.
推薦
Communications Infrastructure
The XC7K160T-L2FFG676E can serve as the programmable fabric in communications equipment requiring parallel lanes, dedicated buffering, and flexible protocol support. Its block RAM supports channel buffering and payload alignment, while the large logic capacity allows line-rate transforms and supervisory functions to be combined. The 400 user I/O provide a high connection count for parallel backplanes, digital transceivers, and timing references. Engineers should establish deterministic clocking, use pipelined I/O paths, and keep high-fanout control signals registered or buffered. Because package variant substitutions can alter speed and temperature characteristics, validate the exact ordering suffix with the final system timing and environmental requirements.
推薦
Embedded Signal Processing
The XC7K160T-L2FFG676E supports embedded DSP pipelines that require both arithmetic resources and flexible surrounding control logic. Dedicated DSP blocks can accelerate filters, transforms, and multiply-accumulate operations, while 11,700 Kb of block RAM handles coefficient storage, circular buffers, and channel data. The 400-I/O FFG676 package is useful for parallel converter or digital-array interfaces that would otherwise consume scarce board area. Keep DSP clocking and data paths deterministic, inspect DSP-to-logic timing at the -2L grade, and avoid routing critical interfaces across long power or switching regions. The lower-power -2L grade can improve system efficiency when the arithmetic pipeline does not require the maximum timing of the -3 option.
推薦
推薦產品摘要
工程參考資料,適用於 XC7K160T-L2FFG676E — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7K160T-3FFG676E | XC7K160T-2FFG676C | XC7K160T-2FFG676I | XC7K160T-1FFG676I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | FFG676 | FFG676 - same | FFG676 - same | FFG676 - same | FFG676 - same |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Block RAM | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O |
| Speed Grade | -2L | -3 | -2 | -2 | -1 |
| Temperature Suffix | E | E | C | I | I |
| Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V |
主要差異化特點
- Lower-power speed-grade choice within the same FFG676 footprint (對比XC7K160T-3FFG676E)
- Retains 162,240 logic cells and 400 I/O for direct board migration (對比XC7K160T-1FFG676I)
- Same-package selection without changing the 676-ball PCB land pattern (對比XC7K160T-2FFG676C)
設計說明
Use the AMD power-estimation methodology with the exact -2L operating conditions, implemented design, I/O standards, and estimated activity factor. Do not substitute a generic 7 Series power value. Decoupling and bank-supply connections must follow the official FFG676 package data, while unused configuration and supply balls must be connected exactly as directed. Validate the power-up sequence and programmable supply ramp behavior in hardware before releasing the board.
Assign every FFG676 ball from the official package file rather than a generic BGA-676 symbol. Check configuration pins, clock-capable pins, supply and ground balls, voltage banks, and exposed package connections individually. Keep high-speed routing short, provide continuous return paths, and place decoupling close to the relevant supply balls. A footprint that is geometrically similar can still be electrically incorrect if its ball map or thermal-pad implementation differs.
Estimate junction temperature from actual logic utilization, I/O toggle activity, core voltage, ambient temperature, airflow, and PCB thermal resistance. The -2L grade can reduce power relative to the -3 option, but that does not eliminate thermal validation. Use the final board stack-up and enclosure, preserve the intended thermal paths, and test worst-case operating modes. A heatsink recommendation requires completed power and ambient-temperature analysis rather than the FPGA MPN alone.
合規資訊
The AMD Kintex-7 datasheet listing does not establish the exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this ordering code. Obtain current AMD compliance or qualification documentation before using the part in a regulated application.