AMD

XC7K480T-2FFG901C - 477K-Cell Kintex-7 FPGA | AMD

Артикул: XC7K480T-2FFG901C ✓ Активен
1 V Vdss 901-FCBGA, 31 x 31 mm Package -2 Speed
MOQ: 1 |

XC7K480T-2FFG901C Обзор

The AMD XC7K480T-2FFG901C is a Kintex-7 field-programmable gate array with 477,760 logic cells, 35,205,120 bits of block RAM, 1,920 DSP slices, and 380 user I/O in a 901-FCBGA package. The -2 speed grade targets the commercial temperature range, and the package measures approximately 31 x 31 mm.

A field-programmable gate array is a semiconductor whose digital logic, memory, and signal-processing resources can be configured after manufacture. The XC7K480T belongs to the Kintex-7 FPGA hierarchy, combining programmable logic blocks, block RAM, DSP48E1 processing resources, programmable I/O, clock-management circuitry, and high-speed serial transceivers. This combination supports parallel processing, data acquisition, protocol bridging, digital filtering, and embedded accelerator functions within one device.

The Kintex-7 architecture provides 37,325 CLBs or logic-cell groups, together with 34,380 Kb of block RAM and 1,920 DSP slices. Its 28 nm fabrication technology and 1 V core voltage support high logic density while keeping board-level power management practical. A 380-I/O package also gives hardware designers access to substantial parallel connectivity for control buses, data capture, external memory interfaces, and general-purpose digital I/O.

The -2 designation identifies the device performance grade within the Kintex-7 family, which is offered in -3, -2, -1, -1L, and -2L grades according to the manufacturer documentation. The FFG901 designation identifies the 901-ball FCBGA package, while the trailing C identifies the commercial-temperature option. The manufacturer documentation also identifies the device as a 901-FCBGA package measuring 31 x 31 mm.

Typical uses include industrial control, test and measurement, communications infrastructure, high-speed data acquisition, video and image processing, and embedded signal-processing systems. The large logic fabric can implement parallel algorithms, the DSP resources can accelerate filtering and fixed-point arithmetic, and the block RAM can support buffering, packet storage, and lookup functions without relying entirely on external memory.

PCB implementation must follow the AMD package pinout and high-speed layout guidance. A 901-ball FCBGA requires dense escape routing, careful power-plane segmentation, and thermal analysis. Differential and high-speed interfaces should use controlled-impedance routing, while power and ground distribution should provide low-impedance paths from supplies to the package balls.

This page combines the device architecture, package and resource data with application guidance, practical design notes, and same-package replacement analysis. It is intended to help engineers evaluate whether the XC7K480T-2FFG901C provides the required Kintex-7 logic, memory, DSP, I/O, speed-grade, and temperature-range capability for a specific FPGA design.

Аналоги без доработки для XC7K480T-2FFG901C — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с XC7K480T-2FFG901C (тот же форм-фактор и посадочное место) — отличается по Block RAM, Logic Cells, Package, Speed Grade, Core Voltage.

AMD
Block RAM: 35205120 bits
Logic Cells: 477760
Package: 900-BBGA, FCBGA
Сравнить с XC7K480T-2FFG901C →
AMD
Block RAM: 35205120 bits
Logic Cells: 477760
Package: 900-BBGA, FCBGA
Сравнить с XC7K480T-2FFG901C →

XC7K480T-2FF901C

✅ Прямая замена
📦 901-FCBGA, 31 x 31 mm
Same 901-FCBGA footprint, terminals, and -2 performance grade; order-code package designation differs by FFG versus FF notation

📋 Справочный аналог (нет в каталоге)

XC7K480T-2FFG901I

✅ Прямая замена ⚠️ Характеристики не проверены
AMD
📦 901-FCBGA, 31 x 31 mm
Kintex-7 · 477760 · 35205120 bits · 380 · 900-BBGA, FCBGA · 28nm · 1V · -2

Уточнить цену

Открыть даташит →

XC7K480T-1FFG901C

✅ Прямая замена ⚠️ Характеристики не проверены
📦 901-FCBGA, 31 x 31 mm
Same 901-FCBGA footprint and commercial temperature grade; -1 speed grade is slower than -2, requiring timing-margin review

📋 Справочный аналог (нет в каталоге)

XC7K480T-3FFG901C

✅ Прямая замена ⚠️ Характеристики не проверены
📦 901-FCBGA, 31 x 31 mm
Same 901-FCBGA footprint and commercial temperature grade; -3 speed grade is faster than -2 with different timing and power characteristics

📋 Справочный аналог (нет в каталоге)

XC7K480T-1FFG901I

✅ Прямая замена ⚠️ Характеристики не проверены
AMD
📦 901-FCBGA, 31 x 31 mm
Kintex-7 · 477760 · 35205120 bits · 380 · 900-BBGA, FCBGA · -40C to +100C · -1

Уточнить цену

Открыть даташит →

XC7K480T-2FFG901C Максимальные параметры и электрические характеристики

Device Type Kintex-7 Field-Programmable Gate Array
Logic Cells 477,760 cells
CLBs / Logic-Element Groups 37,325 CLBs
Block RAM 34,380 Kb
Total RAM Bits 35,205,120 bits
DSP Slices 1,920 slices
User I/O 380 I/O
Process Technology 28 nm
Core Voltage 1 V
Speed Grade -2
Temperature Range 0 °C to 85 °C
Корпус 901-FCBGA, 31 x 31 mm
Package Pin Count 901 balls
Тип монтажа Surface Mount
Packaging Tray

Руководство по цоколевке XC7K480T-2FFG901C в корпусе 901 balls

Цоколевка для XC7K480T-2FFG901C (корпус 901 balls). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 901 balls для XC7K480T-2FFG901C

Нет подробных данных о распиновке для XC7K480T-2FFG901C.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

XC7K480T-2FFG901C подходит для 6 применениеs: Industrial Control and Automation, High-Speed Data Acquisition, Communications and Protocol Bridging, Test and Measurement Equipment, Video and Image Processing, Embedded Signal Processing.

🏭

Industrial Control and Automation

The XC7K480T-2FFG901C fits high-end industrial controllers that coordinate motion, sequencing, diagnostics, communications, and safety-adjacent logic in one programmable device. Its 477,760 logic cells provide substantial capacity for parallel control paths, while 380 user I/O support encoder inputs, sensor interfaces, actuators, and field-bus connections. The 35,205,120 block-RAM bits can hold operating data, diagnostics, and communication buffers. For a -2 commercial-grade system, the 0 °C to 85 °C operating range suits controlled indoor equipment. Implementation should use AMD constraints for the 901-FCBGA footprint, validate clock-domain crossings, and verify timing after synthesis against the -2 device target.

📡

High-Speed Data Acquisition

XC7K480T-2FFG901C is appropriate for parallel data-acquisition systems that must capture wide buses, buffer bursts, and process samples in real time. Its 380 user I/O provide substantial parallel connectivity, while 35,205,120 RAM bits can accommodate high-depth capture and buffering requirements. The 1,920 DSP slices can perform filtering, correlation, scaling, or fixed-point transformations alongside acquisition control logic. Engineers should establish the target sample rate against the selected I/O standard and clocking scheme, then use post-route timing reports to confirm timing closure. PCB implementation must preserve controlled-impedance routing and provide low-impedance power and ground distribution across the dense 901-FCBGA land pattern.

🌐

Communications and Protocol Bridging

The XC7K480T-2FFG901C can consolidate multiple communication interfaces, packet-processing paths, and protocol-conversion engines in a single Kintex-7 device. The large programmable logic fabric supports parallel packet parsing, framing, routing, and error checking, while block RAM provides configurable FIFO depths and buffering. The 1,920 DSP slices can accelerate filtering, correlation, and other fixed-point operations associated with signal processing. A practical design should partition clock domains carefully, reserve resources for protocol timing, and verify board-level signal integrity for high-speed interfaces. Pin assignment and bitstream compatibility must be checked against the exact 901-ball package rather than inferred from another FPGA order code.

🖥️

Test and Measurement Equipment

XC7K480T-2FFG901C is well suited to modular test and measurement platforms that combine pattern generation, acquisition, analysis, and instrument control. Its 477,760 logic cells allow concurrent test sequences and interface control, while the 35,205,120 block-RAM bits support deep sample and trace buffers. The 1,920 DSP slices can implement filters, transforms, and calibration routines without offloading every operation to external processors. The -2 speed grade is appropriate for demanding timing paths, and the commercial temperature range covers typical laboratory and factory environments. Designers should use device utilization reporting to reserve headroom and verify that the selected I/O standards, external memory interface, and clocking architecture meet the instrument specification.

📺

Video and Image Processing

The XC7K480T-2FFG901C can support parallel image pipelines, sensor aggregation, pixel transformation, and real-time video processing. Its large logic fabric is useful for line buffers, pixel-format conversion, control logic, and multi-stage processing pipelines, while 35,205,120 block-RAM bits can store multiple frame or line buffers. The 1,920 DSP slices allow multiply-accumulate filtering and arithmetic kernels to be implemented in hardware. For a production board, constrain clocks and high-speed interfaces according to the selected I/O standard, reserve memory for frame-rate changes, and perform thermal analysis for sustained processing workloads. The 901-FCBGA footprint also requires careful via-in-pad or escape-routing strategy to preserve signal integrity.

⚡

Embedded Signal Processing

XC7K480T-2FFG901C supports embedded signal-processing systems that require deterministic parallel throughput and programmable hardware acceleration. The 1,920 DSP slices can execute FIR filters, correlation, modulation, demodulation, or fixed-point transforms, while the large logic fabric manages control flow, buffering, and external interfaces. Block RAM provides dedicated storage for coefficients, sample histories, and intermediate results, reducing pressure on external memory during predictable workloads. Engineering teams should map arithmetic precision and DSP48E1 resource requirements before architecture freeze, then confirm timing with implementation reports for the -2 grade. Power delivery and thermal design must accommodate sustained utilization across a dense 901-FCBGA package without creating excessive voltage-drop or junction-temperature risk.

What are the key specifications of XC7K480T-2FFG901C that engineers should know?
The XC7K480T-2FFG901C provides 477,760 logic cells, 35,205,120 bits of block RAM, 1,920 DSP slices, and 380 user I/O. According to the AMD Kintex-7 manufacturer datasheet, the device uses 28 nm process technology with a 1 V core voltage. It is offered in the -2 speed grade, commercial temperature range of 0 °C to 85 °C, and a 901-FCBGA package measuring approximately 31 x 31 mm. These resources make it suitable for parallel digital logic, embedded DSP, buffering, and high-pin-count industrial systems.
Where can I download the XC7K480T-2FFG901C datasheet PDF?
The XC7K480T-2FFG901C datasheet documentation is available through the AMD Kintex-7 family datasheet and the linked technical-document page. The manufacturer documentation describes the XC7K480T architecture, -3, -2, -1, -1L, and -2L speed grades, and the FFG901 package options. Use the package pinout files and UG475 when assigning package balls and PCB constraints. For a new Vivado design, also consult the device-specific constraints and board-design guidance for the selected FFG901 footprint.
Where can I find the XC7K480T-2FFG901C pinout?
The XC7K480T-2FFG901C pinout is published through the AMD Kintex-7 package-device pinout files, with the package information described by UG475. The device uses a 901-FCBGA package, so the ball map must be read together with the package outline, exposed thermal-pad requirements, and PCB escape-routing constraints. Do not infer ball assignments from the generic FF901 identifier: verify every power, ground, configuration, clock, and user-I/O ball against the official package files before schematic capture or PCB layout.
What is the difference between XC7K480T-2FFG901C and XC7K480T-2FF901C?
The XC7K480T-2FFG901C is the specified FFG901 commercial-temperature Kintex-7 device, while XC7K480T-2FF901C is another ordering form associated with the same 901-FCBGA footprint. The comparison service reports consistent terminals, package characteristics, and principal performance parameters, indicating direct replacement compatibility. Board engineers should still compare the exact order codes, temperature identifiers, and AMD package files before substitution because suffix changes can identify commercial, industrial, or other ordering conditions.
When should I choose XC7K480T-2FFG901C over a smaller Kintex-7 FPGA?
Choose XC7K480T-2FFG901C when the design needs more than 477,760 logic cells, 35,205,120 RAM bits, 1,920 DSP slices, or 380 user I/O. Its 901-FCBGA package supports high parallelism and substantial on-chip buffering, making it appropriate for industrial control, communications, test equipment, and embedded processing systems. A smaller Kintex-7 device may be preferable when utilization, board area, power, and cost requirements are lower. The decisive comparison should use post-implementation timing, memory demand, DSP occupancy, and pin assignment rather than logic-cell count alone.
Is XC7K480T-2FFG901C suitable for high-speed data acquisition?
The XC7K480T-2FFG901C is suitable for parallel high-speed data-acquisition systems that require large capture buffers and extensive real-time processing. It provides 35,205,120 block-RAM bits, 1,920 DSP slices, 380 user I/O, and a -2 performance grade. In an acquisition design, the parallel fabric can maintain multiple data paths while block RAM absorbs bursts and DSP resources execute filtering or transformation. The achievable input rate still depends on the selected I/O standard, clocking architecture, timing constraints, PCB signal integrity, and external memory interface.
What is the best drop-in replacement for XC7K480T-2FFG901C?
The closest documented same-footprint replacement is XC7K480T-2FF901C, which the cross-reference comparison identifies as having consistent terminals, package characteristics, and principal performance parameters. Same-package XC7K480T variants with different -1 or -3 speed grades or industrial temperature suffixes can also reuse the FFG901 land pattern, but their timing and thermal operating limits differ. Verify the exact AMD order code, ball map, temperature grade, and Vivado target before treating any alternate as a production replacement.
Can XC7K480T-2FFG901C replace another Kintex-7 device without PCB changes?
The XC7K480T-2FFG901C can replace a compatible Kintex-7 device only when both use the same 901-ball package, have matching power, ground, configuration, and user-I/O assignments, and satisfy the required speed and temperature grades. The documented XC7K480T-2FF901C comparison reports consistent terminals and package characteristics. Nevertheless, an FPGA replacement also requires bitstream and constraint validation, including pin mapping, clocking, configuration pins, power sequencing, and timing closure. Physical compatibility alone does not guarantee an interchangeable bitstream.
How do I choose between XC7K480T-2FFG901C and XC7K480T-2FF901C?
Choose XC7K480T-2FFG901C when the procurement record or design specifies FFG901 with the commercial-temperature suffix, and choose XC7K480T-2FF901C when that is the controlled ordering form. The two devices are reported as package- and terminal-consistent with matching principal performance characteristics. If both order codes are approved for the same assembly, compare their exact commercial suffixes and authorized package documentation. The practical decision should also consider traceability, lifecycle status, and whether the FPGA configuration file and constraints are released against a specific device identifier.
What can replace XC7K480T-2FFG901C?
XC7K480T-2FF901C is the documented direct replacement candidate because it retains the same 901-FCBGA package and is reported to have consistent terminals and principal performance parameters. Same-brand XC7K480T FFG901 variants can also fit the footprint, including different speed grades and temperature classes, but each changes an engineering constraint. No cross-brand drop-in was established for this high-density Kintex-7 device. Confirm the exact order code and rerun implementation before approving a substitution.
Is XC7K480T-2FFG901C the same as XC7K480T-2FF901C?
The XC7K480T-2FFG901C and XC7K480T-2FF901C are reported as completely replaceable with consistent package characteristics, terminal assignments, and principal FPGA parameters. They both identify the 901-FCBGA Kintex-7 implementation and the -2 speed grade. They are not necessarily identical commercial order codes, so procurement and lifecycle records should distinguish the FFG901 form. Production release requires confirmation that the Vivado target, constraints, configuration data, and thermal assumptions remain valid for the selected part.
What is the best AMD equivalent for XC7K480T-2FFG901C?
The best AMD-equivalent drop-in candidate is XC7K480T-2FF901C because the available comparison identifies matching package characteristics, terminals, and principal performance parameters. Same-brand XC7K480T FFG901 speed-grade and temperature variants provide additional footprint-compatible options, while their performance envelopes differ. A true cross-brand equivalent would require the same 901-ball mechanical outline and matching electrical, configuration, and I/O behavior; no such cross-brand device was established. Use AMD’s package files and the project constraints to approve the final substitution.
How do I use XC7K480T-2FFG901C with Vivado?
Use Vivado with the XC7K480T device selected as the exact implementation target, then apply constraints for the 901-FCBGA footprint and board-specific clock, power, and I/O assignments. After synthesis and implementation, inspect utilization for logic, block RAM, DSP, and I/O, and review timing against the -2 speed grade. Program the device through its configuration architecture and validate the design on the intended hardware. The 380-I/O package and dense ball array make pin planning and package-aware PCB constraints especially important.
Where can I buy XC7K480T-2FFG901C online and what is the lead time?
Use the Request a Quote form on this page to ask for XC7K480T-2FFG901C availability, unit pricing, and current lead time. The form allows procurement teams to specify quantity, tray packaging, target date, and inspection requirements without relying on a static price table. Current inventory can change rapidly for a 901-FCBGA Kintex-7 FPGA, so confirm the manufacturer suffix and package marking when placing the order. XAIPART can then return a quotation tied to the requested commercial terms.
How much does XC7K480T-2FFG901C cost?
The current XC7K480T-2FFG901C quotation is obtained through the Request a Quote form on this page. Pricing for this device can vary with order quantity, packaging, component traceability, inspection requirements, and market availability. Submit the required quantity and procurement terms for a current response rather than relying on an obsolete or generic listing. Confirm that the quotation identifies the exact XC7K480T-2FFG901C order code, commercial-temperature suffix, tray packaging, and any requested traceability documentation.
Is XC7K480T-2FFG901C in stock?
Current XC7K480T-2FFG901C stock should be confirmed through the Request a Quote form on this page. The exact order code includes a 901-FCBGA package, -2 speed grade, and commercial-temperature suffix, all of which affect availability and sourcing. Provide your required quantity, target date, packaging preference, and traceability needs so the quotation can reflect a usable allocation. Do not substitute a different package or speed grade without engineering approval and constraint updates.

Справочные инженерные данные для XC7K480T-2FFG901C — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose XC7K480T-2FFG901C for industrial, communications, test, acquisition, and signal-processing systems that need the combined capacity of 477,760 logic cells, 35,205,120 block-RAM bits, 1,920 DSP slices, and 380 I/O in a 901-FCBGA package. XC7K480T-2FF901C is the closest documented ordering-form alternative when package characteristics, terminals, and principal performance parameters are consistent. Use XC7K480T-2FFG901I when an industrial temperature class is required without reducing the -2 speed grade. XC7K480T-1FFG901C or -1FFG901I can reuse the footprint when lower speed is acceptable and timing closure remains positive, while -3FFG901C can provide greater performance with different timing and power behavior. No cross-brand drop-in equivalent was established for this high-density device. Final selection must include package-file review, Vivado timing results, resource utilization, thermal analysis, and exact operating-temperature requirements.

Сравнение с аналогами

Параметр Этот товар XC7K480T-2FF901C XC7K480T-2FFG901I XC7K480T-1FFG901C XC7K480T-3FFG901C XC7K480T-1FFG901I
Brand AMD AMD AMD AMD AMD AMD
Package 901-FCBGA, 31 x 31 mm 901-FCBGA, 31 x 31 mm 901-FCBGA, 31 x 31 mm 901-FCBGA, 31 x 31 mm 901-FCBGA, 31 x 31 mm 901-FCBGA, 31 x 31 mm
Logic Cells 477,760 cells 477,760 cells 477,760 cells 477,760 cells 477,760 cells 477,760 cells
Block RAM 34,380 Kb 34,380 Kb 34,380 Kb 34,380 Kb 34,380 Kb 34,380 Kb
DSP Slices 1,920 slices 1,920 slices 1,920 slices 1,920 slices 1,920 slices 1,920 slices
User I/O 380 I/O 380 I/O 380 I/O 380 I/O 380 I/O 380 I/O
Speed Grade -2 -2 -2 -1 -3 -1
Temperature Grade Commercial, 0 °C to 85 °C Commercial, 0 °C to 85 °C Industrial Commercial, 0 °C to 85 °C Commercial, 0 °C to 85 °C Industrial
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm

Ключевые отличия

  • High-density Kintex-7 implementation with extensive DSP and memory (против XC7A100T-1FGG484C)
  • Commercial -2 speed grade supports a higher timing target than -1 (против XC7K480T-1FFG901C)
  • Industrial temperature option retains the same package footprint (против XC7K480T-1FFG901I)
  • Documented terminal-compatible ordering form (против XC7K480T-2FF901C)

Заметки по проектированию

Treat the 901-FCBGA footprint as a high-density routing problem rather than a conventional perimeter-lead package. Follow the AMD package pinout and board-design guidance for ball assignment, power and ground connectivity, thermal-via placement, and escape routing. Preserve continuous return paths beneath high-speed nets, use the documented reference escape geometry, and avoid placing sensitive routing across power-plane splits. Validate the completed stack-up with field solver results and maintain adequate spacing between aggressors and clocks, serial links, and sensitive configuration signals.

Create a complete power plan before assigning all 380 user I/O and DSP resources. Decouple each supply domain with the capacitance and placement required by the AMD guidance, provide low-impedance layer transitions from the regulators to the package balls, and account for simultaneous switching current when estimating voltage droop. Confirm whether the selected board uses the conventional Kintex-7 supply arrangement or a power-management configuration. Validate rail sequencing, monitored rails, and startup behavior in hardware because successful bitstream loading does not prove correct power integrity.

Use the package thermal data and the device's actual speed grade and temperature suffix to estimate junction temperature. The -2 grade may consume more power than -1 in timing-critical designs, while sustained use of all 1,920 DSP slices can raise activity-dependent dissipation. Provide thermal vias and copper spreading structures under the package where the footprint permits, avoid enclosing the device in a poorly ventilated enclosure, and monitor junction temperature during worst-case vector activity. Validate thermal assumptions in hardware rather than relying only on nominal FPGA utilization estimates.

Do not assume that an FPGA with the same land pattern is interchangeable merely because its logic resources match. Verify the exact ball map, voltage requirements, configuration pins, MRCC and SRCC pairing, clock-capable pins, memory interfaces, and serial transceiver assignments. Different speed grades can change timing closure and power consumption, while different temperature suffixes change environmental limits. After selecting an alternate order code, recreate the Vivado target, rerun synthesis and implementation, generate fresh bitstream and constraint files, and perform board-level validation.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device documentation does not provide explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statements. AEC-Q100 is not applicable to this commercial Kintex-7 FPGA ordering option.

Данные проверены: 2026-11-18 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

xc7k480t fpga xc7k480t board xc7k480t vivado xc7k480t datasheet xc7k480t 2ffg1156 xc7k480t development board xc7k480t specs xc7k480t fpga development board XC7K480T-2FFG901C datasheet XC7K480T-2FFG901C pinout XC7K480T-2FFG901C footprint XC7K480T-2FFG901C equivalent XC7K480T-2FFG901C replacement XC7K480T-2FFG901C price XC7K480T-2FFG901C stock

Связанные компоненты & термины

AMD XC7K480T-2FFG901C XC7K480T-2FF901C XC7K480T-2FFG901I XC7K480T-1FFG901C XC7K480T-3FFG901C XC7K480T-1FFG901I Kintex-7 field-programmable gate array FPGA programmable logic logic cell CLB block RAM DSP48E1 DSP slice user I/O 901-FCBGA FCBGA surface-mount package 28 nm process technology Vivado industrial control data acquisition signal processing
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ