Mga Produkto (44,000+)

WM8783GED/RV - 24-Bit Stereo Audio ADC | Cirrus Logic
WM8783GED/RV

WM8783GED/RV - 24-Bit Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8783GED/RV is a 24-bit stereo audio analog-to-digital converter designed for digital audio systems. It accepts single-ended analog line inputs, supports sampling rates up to 96 kSPS, and provides an I2S digital audio interface. The component is housed in an 8-pin SOIC package. The WM8783 belongs to the audio ADC category within the broader analog-to-digital converter and mixed-signal IC hierarchy. Audio ADCs convert continuous analog audio signals into digital sample streams for processing, storage, transmission, or playback. The WM8783 is intended for applications such as set-top boxes, DVD systems, and other consumer audio equipment where stereo line-level signals must be digitized with a compact interface. Key features include 24-bit resolution, a maximum sampling rate of 96 kSPS, stereo analog inputs, and an I2S output interface. The device is described as a compact, low-cost ADC for set-top box and DVD applications. Its stereo input architecture is suitable for two-channel audio acquisition, while the digital output allows direct connection to a digital audio processor, codec, or system interface. The WM8783GED/RV is manufactured on a CMOS process and is therefore susceptible to electrostatic discharge damage during handling. ESD-safe handling procedures are important during soldering, inspection, and production assembly. The device's function is straightforward for an audio converter: analog signals enter through the stereo input pins, are sampled and quantized by the ADC, and are transferred over the I2S interface as digital audio data. Typical applications include set-top box audio paths, DVD player analog input stages, consumer audio receivers, and embedded multimedia systems. The 96 kSPS maximum rate supports high-resolution audio conversion, while 24-bit data provides substantial dynamic range for line-level sources. System designers should verify the analog input range, reference implementation, clocking requirements, and digital interface configuration against the manufacturer datasheet before finalizing the circuit. This page combines the WM8783GED/RV product identity, core ADC specifications, application guidance, and design considerations into a concise engineering reference. It is intended to help engineers identify suitable use cases, plan board-level integration, and evaluate equivalent parts without overlooking pin compatibility, interface requirements, or supply-availability constraints.

RFQ Kontak
WM8783GED/V Stereo 98kHz Audio ADC | Cirrus Logic
WM8783GED/V

WM8783GED/V Stereo 98kHz Audio ADC | Cirrus Logic

Cirrus Logic WM8783GED/V is a stereo low-power audio analog-to-digital converter with a 98 kHz sampling rate and 24-bit I2S output, supplied in an 8-pin SOIC package. The verified manufacturer-family source describes it as a stereo low-power ADC, while the retrieved distributor data identifies the same device family for 96 kHz operation. It is designed for compact audio capture, playback, and mixed-signal systems requiring dual-channel conversion. An ADC is an analog-to-digital converter, a mixed-signal integrated circuit that converts continuously varying analog audio voltages into digital samples. In the broader component hierarchy, an audio ADC belongs to data converters, mixed-signal semiconductors, and signal-chain ICs. The WM8783GED/V therefore sits between an analog microphone or line input and a digital audio interface such as I2S. The principal verified features are stereo operation, a 24-bit conversion format, I2S digital output, and a family sampling-rate capability reported as 98 kHz in distributor material and 96 kHz in the Wolfson-family result. The device is identified as low power, making it relevant to embedded audio systems where power consumption, channel count, and board area constrain the architecture. The manufacturer-family datasheet source also indicates that the device is manufactured on a CMOS process and is ESD-sensitive. WM8783GED/V is suitable for digital recording front ends, USB audio adapters, industrial audio capture, portable audio equipment, and consumer audio systems. In each case, the stereo ADC can convert left and right analog inputs into digital samples for downstream processing or transmission. The I2S interface helps simplify connection to digital audio controllers, DSPs, and microcontrollers, although the host device must support the required clocking and framing format. When selecting this part, verify the exact electrical characteristics, analog input range, clock requirements, master or slave operating mode, and package pin assignment in the current manufacturer documentation. Do not infer those values from generic ADC descriptions. For replacement work, confirm that the candidate uses the same SOIC footprint and pin-to-pin signal arrangement rather than relying only on a similar sample rate or converter function. This page combines the verified source snippets for the WM8783GED/V family with engineering-oriented application and selection context. Because the retrieved data does not provide a complete current manufacturer product page, several detailed parameters remain explicitly marked for verification rather than being guessed.

RFQ Kontak
WM8786GEDS/V - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic
WM8786GEDS/V

WM8786GEDS/V - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8786GEDS/V is a 24-bit, 192kHz stereo audio analog-to-digital converter with differential inputs, digital audio processing, and I2S output in a 20-pin SSOP package. The device is identified by the WM8786GEDS/V manufacturer part number and is intended for high-performance recordable media applications. A stereo audio ADC is a data-conversion IC that accepts two analog audio channels and converts them into digital samples for processing, storage, transmission, or playback. The WM8786GEDS/V belongs to the ADC/DAC and audio data-converter hierarchy, where differential inputs, integrated audio DSP, and a high-resolution serial interface help simplify audio capture designs. Verified distributor and manufacturer information identifies the WM8786GEDS/V as an audio ADC with 24-bit resolution, operation up to 192kHz, DSP capability, differential inputs, and a 20-SSOP package. The stereo architecture supports simultaneous left and right audio conversion, while the digital audio interface is identified as I2S. These features make the device suitable for consumer audio equipment, recording systems, digital audio equipment, and embedded audio products. The WM8786GEDS/V is differentiated from general-purpose data converters by its dedicated audio-oriented feature set. Its 24-bit resolution supports high-fidelity capture, the 192kHz maximum sample rate supports high-resolution audio, and differential analog inputs help reduce common-mode noise in balanced audio signal paths. The integrated DSP function can assist with signal conditioning and audio processing, although the exact operating modes and filter settings must be confirmed in the manufacturer datasheet. Typical applications include stereo recording equipment, consumer audio systems, digital mixing and amplification products, USB or portable audio interfaces, and other systems requiring two-channel audio capture. In these applications, the ADC can be placed between balanced or appropriately conditioned analog audio inputs and an I2S-capable digital audio processor. The 20-SSOP package supports compact PCB layouts, but its fine pitch requires careful soldering and layout practices. Designers should confirm the analog input range, differential input configuration, reference-voltage requirements, digital supply levels, clocking requirements, and supported I2S formats before releasing a production design. Decoupling capacitors should be placed close to the supply pins, and analog and digital routing should be separated to reduce switching noise coupling into the audio inputs. The manufacturer datasheet and application information should be used for the final input, clock, filtering, and layout implementation. This product page consolidates verified distributor identity and product descriptions with package, application, selection, and engineering guidance. It distinguishes the WM8786GEDS/V from the related WM8786GEDS/RV ordering variant and provides a practical framework for confirming pin and PCB compatibility before substitution.

RFQ Kontak
WM8788GEDT - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic
WM8788GEDT

WM8788GEDT - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8788GEDT is a 24-bit stereo audio analog-to-digital converter capable of sampling at up to 192 kHz, supplied in a 16-pin TSSOP package. It supports I2S digital audio output, analog and digital supply rails, and analog line-level inputs configured through external resistors. The verified operating-temperature range is -40°C to +85°C, and the component is available in reel packaging for surface-mount production. An audio ADC is an interface IC that converts left- and right-channel analog sound signals into digital samples for processing, storage, or transmission. The WM8788GEDT belongs to the broader ADC/DAC hierarchy, where an ADC converts analog audio into digital data and a DAC performs the inverse operation. Its stereo architecture supports simultaneous processing of two analog channels, while the digital interface carries 24-bit audio data. The headline specifications are a 24-bit conversion resolution, a maximum sample rate of 192 kHz, and a 16-pin TSSOP package. The device accepts a pair of analog inputs, and external resistors configure the inputs for line-level operation at 1 Vrms or for higher signal levels. This combination makes the converter appropriate for consumer audio equipment, digital mixing systems, recording interfaces, and other stereo audio products that require high-resolution capture. The verified interface data identifies I2S as the digital audio interface and indicates separate analog and digital supply sources. These supply domains require correct decoupling and grounding to prevent digital switching activity from contaminating the analog conversion path. The converter's operating range of -40°C to +85°C supports use across industrial and commercial temperature environments, subject to the complete manufacturer datasheet requirements. Typical applications include high-resolution stereo recording, line-level audio capture, digital audio mixers, and audio interface products. Its 192 kHz maximum rate supports high-resolution conversion, while the 24-bit word length provides ample numerical resolution for professional and premium consumer audio. Designers should still verify clocking, supported audio-data formats, analog input scaling, and power sequencing against the manufacturer datasheet before releasing a PCB. A key design consideration is analog-versus-digital layout isolation. Place the analog input network close to the converter, maintain a continuous ground reference, and isolate high-current digital return paths from the ADC inputs. Also confirm the exact 16-pin TSSOP pinout and exposed support requirements; the supplied search data does not include a verified pin-by-pin diagram. This page combines verified manufacturer and distributor information with explicit data gaps, application guidance, sourcing context, and design considerations. It distinguishes documented facts from parameters that still require confirmation in the full WM8788GEDT datasheet, helping engineers make a more reliable preliminary design decision without presenting unsupported specifications as established data.

RFQ Kontak
WM8788GEDT/R - 24-Bit Stereo ADC | Cirrus Logic
WM8788GEDT/R

WM8788GEDT/R - 24-Bit Stereo ADC | Cirrus Logic

Cirrus Logic WM8788GEDT/R is a high-performance 24-bit stereo analog-to-digital converter designed for consumer audio equipment. It converts two analog input channels into 24-bit digital audio data at up to 192 kHz through an I2S digital interface, and is packaged in a 16-pin TSSOP surface-mount package. The WM8788GEDT/R designation identifies the reel-packaged version of this Wolfson Microelectronics audio converter. An ADC is a data-acquisition and signal-conversion IC that transforms continuously varying analog voltages into digital values for processing or transmission. In the audio hierarchy, the WM8788GEDT/R belongs to the high-performance stereo ADC class, combines an analog signal chain with digital data conversion, and ultimately operates as a mixed-signal semiconductor. Its stereo architecture makes it suitable for systems requiring simultaneous conversion of left and right audio channels. The primary features are 24-bit resolution, a maximum conversion rate of 192 kHz, two analog inputs, and an I2S digital audio output. External resistors configure the analog inputs for a 1 Vrms line-level signal or for higher input levels. This allows the same converter to be used in different source-impedance and signal-amplitude conditions when the board-level resistor network is selected appropriately. The device supports separate analog and digital supply domains, providing flexible rail partitioning when analog and digital subsystems require different voltage levels. Its 16-TSSOP package supports compact, surface-mount PCB construction, while the listed operating-temperature range of -40°C to +85°C covers industrial-temperature commercial equipment. The manufacturer lists the part as active. Typical applications include LCD television audio paths, DVD players, Blu-ray Disc equipment, set-top boxes, and other consumer systems that convert stereo analog audio into a digital format. Its 192 kHz capability also supports high-resolution audio conversion where the source, clocking, and downstream signal chain support the corresponding sample rate. Designers should treat the analog input network, supply sequencing, clocking, and digital-interface implementation as one signal-chain design. Place input and supply decoupling close to the device, keep analog and digital return currents separated, and verify every digital-audio timing condition against the manufacturer datasheet before releasing the PCB. This page combines the product specifications, sourcing guidance, practical application guidance, package information, and a verified comparison of related audio-conversion options. It is intended to help engineers select the correct converter and plan a reliable implementation without overlooking package, interface, or analog-front-end constraints.

RFQ Kontak
WM8804GEDS/V - 1:1 S/PDIF Transceiver | Cirrus Logic
WM8804GEDS/V

WM8804GEDS/V - 1:1 S/PDIF Transceiver | Cirrus Logic

Cirrus Logic WM8804GEDS/V is a high-performance consumer-mode S/PDIF audio transceiver with one received channel and one transmitted channel, supplied in a 20-lead Pb-free SSOP package. It supports a 2.7 V to 3.6 V supply range, an industrial temperature grade of -40°C to +85°C, a 1:1 digital audio interface, and an internal PLL for generating common audio clocks. An S/PDIF transceiver is an interface IC that converts digital audio signals between consumer Sony/Philips digital audio format and a parallel digital audio interface. Within the broader semiconductor hierarchy, the WM8804 is a digital audio interface IC, an interface IC, and a signal-processing semiconductor used to connect audio converters, receivers, and digital playback systems. The WM8804 can use either a crystal-derived clock or an externally supplied high-quality master clock. Its clock-recovery architecture provides low-jitter recovery of the master clock carried by an S/PDIF stream, while the internal PLL can generate commonly used audio clocks. A dedicated CLKOUT pin provides access to a generated or recovered clock for associated audio-processing circuitry. The 1:1 digital interface supports integration between S/PDIF-capable audio hardware and a digital audio bus. A clock derived from the incoming S/PDIF signal can support system synchronization, while the transmit path provides S/PDIF output from a compatible digital audio source. The combination of integrated PLL functions and clock output reduces the amount of external clock-generation circuitry required in consumer audio products. Typical applications include digital home-theater equipment, CD and DVD player subsystems, digital audio receiver boards, active speaker interfaces, consumer home-audio products, and industrial digital audio equipment. The 20-lead SSOP package supports compact circuit layouts, although its larger lead pitch and body dimensions should be considered against smaller surface-mount alternatives when space is constrained. Designers should provide a clean and stable 2.7 V to 3.6 V supply, route the S/PDIF data and clock signals away from noisy switching nodes, and ensure the selected master-clock source has adequate low-jitter performance. Decoupling and exposed-ground layout should follow the manufacturer datasheet recommendations, particularly when the transceiver is adjacent to a switching power supply or a high-speed digital processor. This product summary consolidates the verified distributor specifications, manufacturer-oriented datasheet references, package information, and design considerations into one engineering-focused guide. It also distinguishes documented electrical facts from unavailable pricing, lifecycle, pin-level, and equivalent-part information so engineers can assess fit without relying on unverified substitutions.

RFQ Kontak
WM8805GEDS/RV - 8:1 S/PDIF Audio Transceiver | Cirrus Logic
WM8805GEDS/RV

WM8805GEDS/RV - 8:1 S/PDIF Audio Transceiver | Cirrus Logic

Cirrus Logic WM8805GEDS/RV is a high-performance consumer-mode S/PDIF digital audio interface transceiver with eight receive channels and one transmit channel, packaged in a 28-lead SSOP. It supports sample rates from 32 kHz to 192 kHz and provides a jitter-attenuating phase-locked loop for clock recovery and audio clock generation. A digital audio transceiver is an interface IC that converts between digital audio data streams, clock signals, and electrical serial links. The WM8805 belongs to the S/PDIF transceiver category, where S/PDIF is a consumer-mode digital audio interface used to carry PCM audio between source components, receivers, amplifiers, and recording equipment. Its receive and transmit sections place multiple digital audio channels behind one device. Key features include eight received channels, one transmitted channel, support for 32 kHz through 192 kHz operation, a PLL-based clock architecture, and 50 ps RMS intrinsic period jitter according to the ChipApex technical listing. The device also complies with IEC 60958-3, covering the digital-audio interface requirements relevant to professional and consumer audio equipment. The WM8805 accepts a crystal-derived or externally supplied high-quality main clock, allowing the transceiver to recover S/PDIF clocks with low jitter and generate commonly used audio clocks. This architecture allows a system designer to centralize clock recovery and distribution while reducing the number of separate digital-interface devices. Typical applications include professional audio equipment, multi-channel receivers, digital mixing consoles, set-top boxes, DVD and Blu-ray disc systems, home theater components, and other consumer products with multiple S/PDIF inputs. The eight-channel receiver is especially useful when a product must accept several digital audio sources and route or convert them through one interface IC. When laying out a design, treat the main clock, S/PDIF data, and ground return paths as high-speed digital connections. Follow the pin-description and application-schematic tables in the manufacturer datasheet for decoupling, clock connection, and input termination. Verify the required channel count, supported sample rate, and master-clock source before assigning pins, because the 28-lead SSOP footprint cannot be reused for a device with a different transceiver architecture. This page consolidates channel counts, supported sampling rates, package information, lifecycle status, equivalent-part guidance, and application-oriented design notes into one engineering reference for the WM8805GEDS/RV.

RFQ Kontak
WM8850GEFL/RV 24-Bit 6-Channel HDA Codec | Cirrus Logic
WM8850GEFL/RV

WM8850GEFL/RV 24-Bit 6-Channel HDA Codec | Cirrus Logic

The Cirrus Logic WM8850GEFL/RV is a 24-bit multichannel High Definition Audio codec with HDA and S/PDIF interfaces, four ADC channels, six DAC channels, and support for three stereo DAC outputs in a 48-pin WFQFN package measuring 7 x 7 mm. The device is designed for embedded systems requiring multichannel digital audio and compatibility with the Intel High Definition Audio specification revision 1.0. An audio codec is an interface IC that converts between digital audio data and analog microphone or line-level signals. The WM8850 belongs to the codec hierarchy within audio interface ICs and broader signal-chain semiconductors. Its integrated converters allow an embedded host to transmit digital audio over HDA or S/PDIF while handling analog audio input and output through dedicated converter channels. Key features include 24-bit audio resolution, six DAC channels, four ADC channels, three stereo DACs for 5.1-channel audio, and a 48-QFN surface-mount package. The HDA 1.0-compatible interface supports integration with industry-standard audio controllers, while S/PDIF provides a digital audio connection for compatible equipment. Its 0.50 mm package pitch supports compact consumer and embedded designs. Technically, the codec combines multichannel recording and playback paths in one device. Four ADC channels provide analog-to-digital conversion for microphone or line-input sources, while the six DAC outputs support up to six playback channels. The three stereo DAC architecture enables six-channel 5.1 playback without requiring three separate stereo converter packages, reducing board area and simplifying digital-audio routing. Typical applications include consumer AV receivers, home-theater equipment, set-top boxes, networked media systems, automotive infotainment units, industrial panels, and other embedded multimedia products. The HDA and S/PDIF interfaces make it particularly suitable for systems that already use a digital audio host processor rather than a purely analog audio path. PCB design should preserve the exposed-pad thermal and electrical requirements of the WFQFN package and place analog input, output, and supply connections according to the manufacturer datasheet. Keep sensitive audio traces away from digital clocks and switching nodes, and verify the recommended decoupling network before signal-path layout is finalized. This page consolidates the device identification, package information, converter configuration, interface features, sourcing paths, and practical replacement guidance. It also distinguishes documented drop-in candidates from unrelated codec families so engineers can assess PCB reuse without confusing functional similarity with pin compatibility.

RFQ Kontak
WM8860GEFL/RV - 32-Bit HD Audio Codec | Cirrus Logic
WM8860GEFL/RV

WM8860GEFL/RV - 32-Bit HD Audio Codec | Cirrus Logic

Cirrus Logic WM8860GEFL/RV is a 32-bit, multichannel high-definition audio codec with 2 ADC channels, 2 DAC channels, and 4-channel transmit and receive capability in a 48-QFN 7 x 7 mm package. It is designed for audio systems requiring integrated high-definition playback, capture, digital audio routing, and S/PDIF connectivity. A high-definition audio codec is an interface IC that converts between digital audio data and analog signals. It sits between a digital audio engine, such as an application processor, and external analog audio circuitry. The WM8860 belongs to the broader hierarchy of integrated circuits, interface ICs, audio codecs, and semiconductor devices, combining conversion, digital mixing, and digital-audio interfaces in one component. The device provides two ADC and two DAC channels, a 32-bit audio architecture, and 4-channel high-definition audio transmit and receive functionality. It also includes an S/PDIF transmitter identified by the manufacturer datasheet as compatible with IEC-60958-3. Two dedicated GPIO pins provide control for external amplifiers or additional system components, reducing the need for separate general-purpose control logic in straightforward audio designs. The WM8860 combines multiple signal-processing functions within the codec. Its ADC channels support digital capture of analog audio, while its DAC channels support high-definition analog playback. The S/PDIF interface allows digital audio to leave the codec for external digital audio equipment. Four-channel transmit and receive operation supports contemporary surround-sound and multi-zone architectures without requiring several separate codec packages. Typical uses include home-theater equipment, multichannel audio receivers, powered speakers, automotive infotainment systems, networked-audio equipment, and portable consumer products. In each case, the codec can centralize analog-to-digital capture, digital-to-analog playback, digital routing, amplifier control, and S/PDIF output while preserving a compact 48-QFN footprint. PCB design should preserve the analog and digital separation required by the codec layout and keep sensitive audio routes away from switching nodes and high-current return paths. The exposed-pad thermal structure requires careful ground-plane and via layout for predictable thermal performance. Input and output filtering must be designed for the intended sample rates, source impedance, and external amplifier characteristics rather than copied from a generic reference circuit. This product page consolidates the confirmed 32-bit codec configuration, 2-ADC/2-DAC channel count, 4-channel transmit and receive capability, 48-QFN package information, S/PDIF support, GPIO resources, verified source links, and engineering guidance into one practical selection and integration resource.

RFQ Kontak
WM8860GEFL/V - 32-Bit 4-Channel HDA Audio Codec | Cirrus Logic
WM8860GEFL/V

WM8860GEFL/V - 32-Bit 4-Channel HDA Audio Codec | Cirrus Logic

The Cirrus Logic WM8860GEFL/V is a 32-bit multichannel High Definition Audio codec with two stereo DACs, four output channels, and Intel High Definition Audio specification revision 1.0 compatibility in a 48-pin QFN package measuring 7 mm by 7 mm. It integrates digital audio interfaces, analog audio conversion, and codec control into a single device for multichannel consumer audio equipment. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and, in some designs, converts analog input into a digital stream. A codec sits within the broader audio interface hierarchy and connects a digital audio bus, analog output circuitry, clocks, control logic, and sometimes microphone inputs. The WM8860GEFL/V is therefore positioned between an HDA controller and the analog speaker or headphone output stage of a finished audio system. The WM8860 family provides two high-performance stereo DACs, enabling four channels of high-definition audio from one package. Its 32-bit audio interface and HDA revision 1.0 compatibility allow it to operate with industry-standard HDA controllers. The 48-QFN package supports compact integration in consumer electronics while providing the mixed-signal connections required for digital audio routing, analog outputs, and codec configuration. The device uses a registered I2C-style control interface and supports vendor-specific control verbs in addition to the standardized HDA verbs implemented by the WM8860. Its system-level role depends on correct clock generation, I2C address configuration, firmware initialization, output-path routing, and analog implementation. These controls allow a host controller to configure playback paths, mixer behavior, and digital volume while the integrated DACs generate the final analog audio channels. Typical applications include desktop computers, home-theater equipment, multichannel active speakers, game consoles, audio docking stations, and consumer media systems with Intel HDA-compatible controllers. It is particularly appropriate where four analog output channels are required without using multiple separate codec packages. System-level audio performance still depends on the external clock source, power supplies, analog output network, grounding, and speaker or headphone amplifiers connected downstream. Design the 7 mm by 7 mm footprint with thermal-via access beneath the exposed pad and keep sensitive analog routing away from digital clocks and switching supply nodes. Validate every external component value against the manufacturer reference schematic and recommended layout. The MPN suffix identifies a specific orderable configuration, so board releases should confirm the full WM8860GEFL/V designation rather than relying only on the WM8860 family name. This page consolidates the verified package, interface, channel-count, and HDA-compatibility details, adds application-specific engineering guidance, and separates confirmed characteristics from parameters that must be confirmed in the manufacturer datasheet before schematic release.

RFQ Kontak
WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8903CLGEFK

WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8903CLGEFK is a 24-bit stereo audio codec with 2 ADC channels, 2 DAC channels, and a 40-pin QFN package measuring 5 x 5 mm. Designed as an ultra-low-power, high-fidelity audio interface, it supports portable-audio signal conversion while combining microphone capture, headphone or line output, and digital audio interfacing in one compact device. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. Within the signal-chain hierarchy, a codec sits between an audio source, such as a microphone or line input, and a digital audio bus such as I2S or I2C. The WM8903 therefore belongs to the broader audio interface IC and low-power mixed-signal semiconductor category. The device provides 24-bit stereo conversion through two ADC and two DAC channels. This 24-bit format allows capture and playback systems to retain substantially more signal detail than conventional 16-bit consumer audio interfaces. Its ultra-low-power design focus makes it appropriate for portable equipment where battery life, heat, and board area constrain the audio subsystem. The WM8903CLGEFK combines stereo analog conversion, digital audio control, and integrated audio processing in a 40-QFN package. Its 5 x 5 mm footprint supports compact layouts, while the exposed-pad package enables direct thermal coupling to the PCB when the device dissipation requires it. The package's exposed pad must be connected according to the manufacturer layout guidance rather than treated as an unused pin. Typical uses include portable media players, smart phones, tablets, connected personal audio products, and other battery-powered systems that require microphone capture and low-noise stereo playback. The same device can also serve compact embedded audio platforms where one codec must support analog recording, headphone output, digital bus communication, and programmable audio routing. PCB design should prioritize short, symmetric analog paths between external audio connectors, microphone circuitry, and the codec. Input and output bypass capacitors should be placed close to their associated pins, while digital clock, data, and control traces should remain isolated from sensitive analog nodes. Confirm pin orientation, exposed-pad connections, supply sequencing, and supported digital audio formats against the manufacturer datasheet before release. This page combines the device's confirmed stereo codec, 24-bit conversion, 40-QFN packaging, and low-power positioning with practical guidance for layout, sourcing, and qualification. It also distinguishes the confirmed WM8903CLGEFK/R listing from true drop-in alternatives, preventing packaging-code changes from being presented as different engineering solutions.

RFQ Kontak
WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic
WM8904CGEFL/V

WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic

The Cirrus Logic WM8904CGEFL/V is an ultra-low-power, high-performance stereo audio codec with a 24-bit signal path, integrated stereo ADC and DAC channels, headphone and line outputs, and a 32-pin QFN package measuring 4 mm by 4 mm. It is designed for portable audio equipment where playback efficiency, compact construction, and elimination of output coupling capacitors are important. The codec also uses a dual-mode charge-pump architecture within its ground-referenced Class-W headphone amplifiers. An audio codec is an integrated semiconductor that converts between digital audio data and analog microphone, line, and headphone signals. In the signal chain, an ADC represents incoming analog audio as digital samples, while a DAC converts digital playback data back into an analog output. The WM8904 combines these functions with integrated headphone and line-output circuitry, reducing the number of external active components required in portable audio systems. The WM8904CGEFL/V supports stereo playback through ground-referenced headphone and line outputs. Because the outputs are ground referenced, their signal is centered around the analog ground reference rather than a divided supply midpoint. The manufacturer states that the outputs eliminate AC coupling capacitors and include common-mode feedback paths that help reject ground noise. These features are particularly useful in portable products where component count, board area, power consumption, and low-frequency noise directly affect user experience. Its Class-W headphone amplifiers incorporate a dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. This architecture supports the device's ultra-low-power design goal while providing integrated headphone drive. The 24-bit codec resolution and two-channel conversion capability make the device suitable for high-quality voice, music, and multimedia playback. Exact conversion rates, signal-to-noise ratios, headphone-output limits, clock frequencies, and supply-voltage limits should be confirmed in the manufacturer datasheet for the selected production configuration. Typical applications include smartphones, portable media players, personal audio devices, portable game consoles, and compact connected audio products. In a smartphone or portable player, the codec can accept digital audio from an application processor, convert it through the DAC, and drive stereo headphones or line outputs while minimizing external passive-component count. The same architecture is suitable for industrial test equipment or voice-enabled systems where low power and a small footprint are important. Layout should prioritize short, quiet analog paths between the codec, microphone or line inputs, and headphone outputs. Place decoupling capacitors close to their associated supply pins and route digital clock and data signals away from sensitive analog inputs. Headphone and line output routing should also account for output impedance, cable loading, and the external components recommended by the manufacturer datasheet. The exposed-pad thermal and layout requirements in the package drawing should be followed to maintain reliable operation across the intended temperature range. This product page combines package, codec, interface, and amplifier details with drop-in replacement information, application guidance, comparison parameters, and PCB-focused design notes. It is structured to help engineers identify whether the WM8904CGEFL/V matches the required channel count, package footprint, power level, and portable-audio architecture before beginning board layout or production sourcing.

RFQ Kontak
WM8918CGEFL/RV - 24-Bit Stereo DAC | Cirrus Logic
WM8918CGEFL/RV

WM8918CGEFL/RV - 24-Bit Stereo DAC | Cirrus Logic

Cirrus Logic WM8918CGEFL/RV is an ultra-low-power stereo digital-to-analog converter with a 24-bit resolution, support for audio data rates up to 96 kHz, and an I2S digital audio interface. It integrates dual ground-referenced headphone amplifiers and is packaged in a 32-QFN surface-mount package measuring 4 mm by 4 mm. Its analog and digital operating supply range is 0.95 V to 1.98 V. An audio DAC is a semiconductor that converts digital PCM audio samples into proportional analog voltages or currents. In the broader hierarchy, the WM8918 belongs to the audio converter class, combining an ADC/DAC-family data converter with integrated headphone-driver circuitry. This combination reduces the number of external signal-chain components and removes the need for output coupling capacitors when the ground-referenced headphone outputs are used as intended. The WM8918 uses Wolfson Class-W amplifier techniques and an innovative dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. Ground-referenced headphone and line outputs eliminate AC-coupling capacitors, while common-mode feedback paths help reject ground noise. The device accepts I2S-format digital audio and supports resolution and sample-rate combinations appropriate for consumer audio playback. The device operates from 0.95 V to 1.98 V and is specified over a -40 °C to +85 °C operating-temperature range. Its 24-bit conversion resolution supports high-fidelity playback, while the 96 kHz capability accommodates professionally rendered and lossless audio material. The 32-QFN package supports compact surface-mount layouts but requires careful exposed-pad thermal management and controlled assembly soldering. Typical applications include USB and Bluetooth headphone adapters, portable-listening products, mobile-device audio accessories, compact stereo playback systems, and embedded audio equipment. The integrated headphone stage is particularly useful when the design goal is a low-component-count analog output path while preserving a direct digital-audio connection from a host processor or audio codec. Design the supply rails so the analog and digital domains remain within their specified operating range under transient loading. Place the manufacturer-recommended decoupling capacitors close to their associated supply pins, route digital audio signals away from the sensitive analog outputs, and provide adequate exposed-pad copper for thermal dissipation. Confirm the complete pin assignments and application circuit against the manufacturer datasheet before PCB release. This product page consolidates the key electrical, packaging, lifecycle, application, and replacement information for engineers evaluating the WM8918CGEFL/RV. It also distinguishes verified drop-in replacements from merely similar audio converters, helping designers avoid board-level incompatibilities caused by different packages, interfaces, or pin assignments.

RFQ Kontak
WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic
WM8940CGEFL/V

WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic

The Cirrus Logic WM8940CGEFL/V is a low-power mono audio codec with integrated microphone, headphone, speaker, and mono line-output support, operating from a 2.5 V to 3.6 V analog supply and a 1.71 V to 3.6 V digital supply. The device accepts 24-bit serial audio data, supports sample rates from 8 kS/s to 48 kS/s, and is packaged in a 24-QFN surface-mount package. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog microphone or line inputs back into digital data. Its hierarchy extends from codec and audio interface to analog and mixed-signal IC, then to interface IC and semiconductor. The WM8940 combines these conversion functions with integrated output drivers, reducing the number of external microphone, headphone, and speaker amplifier components required in portable audio equipment. The WM8940 supports differential or single-ended microphone input and includes speaker, headphone, and mono line-output drivers. Its advanced delta-sigma converters, digital decimation filters, and digital interpolation filters support audio processing from 8 kS/s through 48 kS/s. The manufacturer also identifies a selectable high-pass filter and four programmable notch filters, allowing the device to address microphone low-frequency rejection, wind noise, and other in-band acoustic problems. The 24-bit digital audio interface connects the codec to a host processor, while separate analog and digital supply domains support mixed-signal systems operating at different voltage levels. The analog supply range of 2.5 V to 3.6 V and digital supply range of 1.71 V to 3.6 V provide flexibility for portable consumer equipment. Integrated drivers reduce external amplification requirements, but output loading, thermal dissipation, and DC bias remain important layout considerations. Typical applications include digital still cameras, camcorders, portable media players, voice recorders, personal audio devices, and other battery-powered products requiring one-channel capture and playback. Its low-power mono architecture is particularly appropriate where a stereo codec would add cost, board area, and energy use without improving the intended recording or playback experience. The integrated headphone and speaker paths simplify portable-system design while retaining flexible input selection and digital audio processing. PCB design should keep analog microphone and output routes away from digital clock and serial-data traces, provide a continuous ground reference beneath the exposed pad, and decouple the analog and digital supply pins locally. Component values, filter settings, clock requirements, and output configuration must be selected using the manufacturer’s recommended application circuit and pin descriptions. The exposed thermal pad should be connected to the ground plane according to the package land pattern. This page combines the manufacturer’s device capabilities, lifecycle status, package information, and verified cross-reference results with practical application guidance. It also distinguishes the exact WM8940CGEFL/V order code from related packaging variants and separates confirmed drop-in replacements from functional alternatives that still require package and pin-level review.

RFQ Kontak
WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic
WM8941GEFL/RV

WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic

Cirrus Logic WM8941GEFL/RV is a 24-bit mono audio codec with audio and video buffer-interface functions, packaged in a 28-QFN surface-mount package measuring 4 mm by 4 mm. The component is identified by distributor catalogs as an interface IC in the CODEC category and is associated with the Cirrus Logic WM8941 product family. Its compact package supports space-constrained audio equipment in which analog audio processing, digital audio conversion, and compact routing must coexist within a limited board area. An audio codec is an interface integrated circuit that converts digital audio data to and from analog signals while supporting the clocks, control logic, and signal paths required by audio equipment. In the broader electronics hierarchy, an audio codec belongs to interface ICs, then to integrated circuits and semiconductors. A mono codec is particularly useful when the system processes one primary analog channel while still requiring digital audio conversion, speaker or headphone support, or an embedded video-related audio path. The WM8941GEFL/RV is identified as a 24-bit device. Resolution alone does not determine the complete signal-chain performance: clock frequency, sample rate, analog front-end design, input and output impedance, dynamic range, distortion, and the selected operating mode also determine the achievable audio quality. Designers should therefore use the manufacturer datasheet and its recommended application circuit to select the appropriate filter, clock, decoupling, and output-stage components for the target audio bandwidth. The 28-QFN package creates a compact implementation but places a high share of connections beneath the device body. This supports dense PCB layouts while making careful escape routing important. Input, output, supply, ground, clock, control, and exposed-pad connections must follow the manufacturer’s land pattern and layout guidance. Thermal performance also depends on the exposed pad, copper area, internal planes, and the thermal burden generated by the selected operating mode. Typical design contexts include portable or embedded audio systems, multimedia devices, communication terminals, recording equipment, and other products requiring a compact mono audio conversion interface. In each case, the codec may sit between an audio source and a digital audio host, or between a digital audio engine and an analog transducer stage. Clock topology, grounding, signal routing, and startup behavior must be evaluated as a complete subsystem rather than as isolated component concerns. The primary engineering consideration is integration without compromising signal integrity. Keep analog and digital return currents separated where practical, place required bypass capacitors close to their supply pins, route clocks away from sensitive audio inputs, and use the exposed-pad copper area for both electrical return and thermal spreading. The manufacturer’s reference configuration should also be followed for filtering, resistor values, and gain-dependent components. This page consolidates the verified catalog identity, package information, sourcing guidance, compatibility limits, and practical implementation considerations for the WM8941GEFL/RV. It also distinguishes the observed device configuration from unverified electrical details, helping engineers evaluate the part without treating incomplete catalog data as a complete datasheet specification.

RFQ Kontak
WM8941GEFL/V Mono CODEC with Speaker Driver | Cirrus Logic
WM8941GEFL/V

WM8941GEFL/V Mono CODEC with Speaker Driver | Cirrus Logic

The Cirrus Logic WM8941GEFL/V is a low-power, 24-bit mono audio CODEC with an integrated speaker driver, video buffer, microphone input, headphone output, and mono line output in a 28-QFN (4 mm x 4 mm) package. Designed for portable imaging and multimedia equipment, it combines several analog audio functions with a digital audio interface to reduce the number of external amplifiers and supporting components required in portable products. An audio codec is a mixed-signal interface IC that converts digital audio samples into analog signals and converts analog microphone or line-level audio into a digital format. A mono CODEC performs those functions for one audio channel, while an integrated speaker or headphone driver can directly load an output transducer. The WM8941GEFL/V places this signal chain in one compact surface-mount package suitable for portable digital still cameras, camcorders, and similar equipment. The device supports differential or single-ended microphone inputs, eliminating the need for a separate microphone amplifier in many portable designs. It also integrates drivers for speakers or headphones and provides a mono line output. These resources allow a compact system to implement microphone capture and audio playback while reducing board area and external component count. A separate integrated current-mode video buffer supports video output needs and includes short-circuit protection. The WM8941 family uses sigma-delta conversion for digital audio processing, as described in the manufacturer documentation for the closely related WM8941GEFL/RV version. The WM8941GEFL/V is identified in distribution records as a 24-bit mono CODEC in a 28-QFN (4 mm x 4 mm) package. Its design emphasizes portable-system integration rather than a separate collection of discrete analog audio blocks. Typical applications include portable digital cameras, camcorders, compact recording systems, and portable consumer devices requiring microphone recording and mono audio playback. It is particularly relevant where board area is constrained and the design needs integrated microphone, headphone, speaker, line-output, and video-buffer functions. Portable multimedia equipment benefits from the reduced component count and simplified analog routing created by combining these blocks. When laying out a design, follow the pin-description and application-circuit tables in the manufacturer datasheet for supply decoupling, analog and digital return paths, microphone biasing, output filtering, and exposed-pad connection. Keep analog signal paths short, separate sensitive microphone routing from digital and video paths, and connect the exposed thermal pad according to the package land pattern. The exact pin names and PCB footprint details must be taken from the official WM8941 datasheet rather than inferred from similar codec packages. This page consolidates the exact catalog identity, package information, functional description, sourcing routes, compatible-family context, and application guidance for the WM8941GEFL/V. It also identifies where engineering decisions require the manufacturer pin table, electrical limits, or application circuit, helping engineers move directly from component selection to a defensible portable-audio implementation.

RFQ Kontak
WM8950CGEFL/RV - 24-Bit Mono Audio ADC | Cirrus Logic
WM8950CGEFL/RV

WM8950CGEFL/RV - 24-Bit Mono Audio ADC | Cirrus Logic

The Cirrus Logic WM8950CGEFL/RV is a single-channel, 24-bit delta-sigma audio ADC operating at up to 48 kSPS, with a DSP interface and digital audio output, packaged in a 24-QFN surface-mount package measuring 4 x 4 mm. Its 1.71 V to 3.6 V analog supply range supports low-voltage portable, embedded, and consumer audio systems. An audio ADC is a data-converter IC that samples an analog microphone or line-level signal and converts it into a digital representation for transmission, storage, or further processing. The WM8950 belongs to the ADC/DAC class of data converters, where the delta-sigma architecture emphasizes high resolution and compact implementation. Its DSP interface supports configurable digital signal processing, while I2S provides a conventional connection to digital audio processors. The device provides 24-bit resolution, a maximum sampling rate of 48 kSPS, one analog input channel, and an I2S digital audio interface. A 1.71 V to 3.6 V supply range permits operation from low-voltage digital systems, while the 24-QFN package limits board area to 4 x 4 mm. The exposed-pad construction provides a direct thermal path from the converter to the PCB when properly soldered and thermally coupled. Its delta-sigma conversion architecture is suited to audio-band signals requiring greater resolution than a compact 8-bit or 16-bit system ADC. The DSP interface can apply digital filtering and signal conditioning before data reaches the host processor, reducing the need for separate software and analog processing in embedded audio designs. The 48 kSPS rate covers standard digital-audio acquisition rates used in voice, communication, and consumer equipment. Typical uses include digital microphones, microphone-array preprocessing, industrial monitoring, smart-home audio nodes, portable accessories, and embedded voice-capture systems. In these applications, the converter can capture one analog channel and present digital audio to an application processor, DSP, or audio subsystem. The compact footprint is especially useful where board space is constrained and the 24-bit word length preserves low-level signal detail. Designers should treat the exposed pad as both a thermal and electrical land, follow the manufacturer's recommended decoupling and layout guidance, and confirm all digital-interface signal levels against the host device. The 0.5 mm terminal pitch requires careful assembly inspection because fine-pitch soldering defects can cause intermittent channel or interface failures. This page consolidates the verified electrical identity, package information, orderable variants, drop-in candidates, and practical design guidance needed to evaluate the WM8950CGEFL/RV for an embedded audio-conversion design.

RFQ Kontak
WM8952ECS/RV - 24-Bit Mono Audio ADC | Cirrus Logic
WM8952ECS/RV

WM8952ECS/RV - 24-Bit Mono Audio ADC | Cirrus Logic

The Cirrus Logic WM8952ECS/RV is a 24-bit mono audio analog-to-digital converter with an integrated microphone preamplifier, digital signal processing, and an I2S audio interface. It supports sampling rates from 8 kS/s to 48 kS/s and is housed in a compact 28-W-CSP measuring 2.59 mm by 2.50 mm. The device operates from a 1.71 V to 3.6 V supply and is intended for space-constrained audio capture and voice-recording systems. An audio ADC is a mixed-signal semiconductor that converts an analog microphone or line-level waveform into a digital audio stream. The WM8952ECS/RV belongs to the audio ADC hierarchy, combining an analog-to-digital converter, programmable gain stage, microphone preamplifier, and digital filters into one package. This integration reduces the number of discrete signal-conditioning components required near a microphone capsule or audio input while preserving a standard digital interface for downstream processing. The converter provides 24-bit resolution and supports sampling rates extending to 48 kS/s. Its signal path includes a selectable high-pass filter and four fully programmable notch filters. A mixed-signal automatic level control function with noise gate helps maintain usable recording levels, and the PGA gain can be read back while ALC operation is active. These features are useful in microphone arrays, voice-capture products, and compact consumer audio equipment where environmental noise and changing source levels require active signal conditioning. The digital audio interface supports I2S as well as A-law and μ-law formats. I2S provides a framed, clocked connection to a digital audio processor, host controller, or audio codec, while the companded formats support legacy telephony and voice applications. The manufacturer datasheet describes the device as using an advanced sigma-delta converter design to provide high-quality audio across its 8 kS/s to 48 kS/s operating range. Typical uses include digital voice recorders, headset electronics, mobile audio accessories, microphone preamp modules, and compact industrial monitoring equipment. Its 28-W-CSP footprint is particularly useful when board area is restricted, although careful escape routing and stable analog supply design remain essential because the device combines sensitive analog input circuitry with a high-speed digital interface. Designers should treat the microphone input, digital clock lines, and supply connections as separate critical paths. Keep analog traces short, use a clean low-noise supply, and follow the manufacturer’s recommended application circuit and component values. The 1.71 V to 3.6 V operating range also requires the host system to remain compatible with the converter’s supply and I2S logic levels. This product page combines the manufacturer specifications, verified distributor listings, package information, application guidance, and replacement analysis for engineers evaluating the WM8952ECS/RV. It also distinguishes documented device functions from specifications that require confirmation from the full datasheet, helping designers plan microphone-front-end integration, interface compatibility, and board-level sourcing.

RFQ Kontak
WM8953ECS/RV - 24-Bit Stereo ADC with PLL | Cirrus Logic
WM8953ECS/RV

WM8953ECS/RV - 24-Bit Stereo ADC with PLL | Cirrus Logic

The Cirrus Logic, Inc. WM8953ECS/RV is a low-power stereo analog-to-digital converter with a 24-bit sigma-delta audio ADC, support for 48 kHz sampling, an integrated PLL, and digital I2S or TDM interfaces. It is packaged in a 42-WLCSP and is designed for portable audio systems, mobile handsets, microphone capture, and line-level stereo recording. Four single-ended or differential analog input connections provide flexible source selection, while each input path supports programmable analog gain up to 60 dB. An audio ADC is a data-conversion IC that converts left and right analog audio signals into digital words for processing, storage, transmission, or playback. The WM8953ECS/RV belongs to the broader ADC/DAC and signal-conversion hierarchy, combining a stereo sigma-delta conversion stage, analog input conditioning, clock generation, and a serial digital audio interface in one compact component. This integration reduces the number of separate clock, capture, and routing blocks required in portable equipment. Key features include 24-bit stereo conversion, operation at 48 kHz, four analog input connections, up to 60 dB of analog gain per input path, and a programmable high-pass filter in the ADC signal path. Single-ended or differential input configurations support microphone and line-input architectures. The integrated PLL and choice of I2S or TDM digital interfaces make the device suitable for systems that need predictable audio-clock recovery and flexible connection to application processors or digital audio processors. The sigma-delta ADC architecture prioritizes high-resolution audio conversion while supporting low-power portable-system requirements. Programmable input gain lets the signal chain be adjusted before conversion, while the high-pass filter can help reduce unwanted low-frequency content in voice and microphone recordings. The WLCSP format supports compact PCB layouts, although careful escape routing, exposed-pad thermal management, and clean analog grounding are essential. Typical uses include mobile-handset voice capture, digital voice recorders, headset microphones, portable audio accessories, stereo line-input equipment, and compact consumer devices that accept digital audio from the WM8953ECS/RV. The same integrated conversion and clocking architecture also suits industrial monitoring modules when power consumption, package area, and audio input count are important constraints. Design the analog input network for the intended source impedance and signal amplitude. Keep microphone and line-input traces short, isolate them from switching nodes, place filtering capacitors close to their associated pins, and maintain a continuous ground reference beneath the analog section. The compact 42-WLCSP requires careful assembly planning because its fine-pitch land pattern and exposed thermal area demand accurate stencil, paste, and reflow control. This product page combines the WM8953ECS/RV device identity, interface and conversion details, application guidance, design considerations, sourcing options, and verified manufacturer information to support engineering selection and PCB planning.

RFQ Kontak
WM8955LSEFL - Stereo Audio DAC with Speaker Driver | Cirrus Logic
WM8955LSEFL

WM8955LSEFL - Stereo Audio DAC with Speaker Driver | Cirrus Logic

The Cirrus Logic Inc. WM8955LSEFL is a stereo digital-to-analog converter with an integrated headphone and speaker driver, a digital audio PLL, and DSP processing for portable audio products. It operates from a 1.71 V to 3.6 V supply, supports 24-bit conversion, and is offered in a compact 32-QFN 5 x 5 mm package. Cirrus Logic markets the device for portable audio applications where several audio functions must share a small circuit area. An audio DAC is a mixed-signal integrated circuit that converts digital audio samples into analog voltage signals for amplifiers, headphones, or loudspeakers. Within the broader signal-chain hierarchy, the WM8955LSEFL combines a digital-to-analog converter, digital signal processing, clock generation, and output-driver functions. Integrating these blocks reduces the component count and board area required around a portable device's audio output stage. Key device attributes include two output channels, 24-bit resolution, and a 48 kSPS audio sampling rate listed for the WM8955LSEFL. The manufacturer also identifies DSP and I2S interfaces, along with separate analog and digital supply domains. A related WM8955LSEFL/R variant is described as supporting a 96 kSPS sampling rate, demonstrating the family's capability for higher-rate digital audio transmission. The integrated digital processing and PLL allow the converter to derive the required audio clock from a system reference and support multiple serial audio formats. The manufacturer lists DSP and I2S as the principal data interfaces, making the device suitable for application processors and portable audio hosts that provide digital sample streams. Its low-voltage operation suits battery-powered equipment where analog and digital rails commonly sit between 1.8 V and 3.3 V. Typical uses include portable media players, smartphones, tablets, digital audio accessories, and compact consumer products. The WM8955LSEFL can also serve as the output stage in a portable speaker system, reducing the need for separate analog codec and output-amplifier blocks. System designers should confirm the selected host interface, required sampling rate, output configuration, and load impedance against the manufacturer datasheet before releasing a PCB. A key design consideration is the relationship between supply voltage, output drive, and thermal dissipation. Headphone and speaker outputs dissipate power as voltage drop across the output transistors, so sustained high-level playback can raise junction temperature even though the digital interface consumes comparatively little power. Reserve copper around the exposed pad, follow the manufacturer's layout guidance, and place output protection components where they cannot compromise the intended load drive. This page consolidates device specifications, interface details, application guidance, and component-selection considerations for engineers evaluating the WM8955LSEFL in compact audio systems.

RFQ Kontak
WM8958ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8958ECS/R

WM8958ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8958ECS/R is a 24-bit stereo audio codec with 2 ADC channels, 4 DAC channels, I2S and PCM digital audio interfaces, and integrated stereo Class D/AB speaker plus Class W headphone drivers, housed in a 72-pin W-CSP package measuring 4.5 mm by 4.3 mm. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, speaker, and headphone signals. It belongs to the codec and audio-interface hierarchy, combines an audio codec, integrated analog-to-digital converters and digital-to-analog converters, and ultimately falls under mixed-signal and signal-processing semiconductors. This integration reduces external components and board area in portable multimedia systems. The WM8958 is designed for smartphones and other portable multimedia devices. Key features include ultra-low-power operation, 24-bit audio conversion, stereo full-duplex asynchronous sample-rate conversion, multiple digital audio channels, integrated Class D/AB speaker amplification, and integrated Class W headphone amplification. It requires two external voltage supplies, while other internal supply rails are generated by integrated low-dropout regulators. Its architecture places an audio hub, converters, digital interfaces, and output-driver functions in one device. The digital side supports I2S and PCM formats, while the analog conversion section supports two ADC inputs and four DAC outputs. The integrated speaker and headphone drivers reduce the need for separate output amplifiers, although external passive filtering, routing, and decoupling networks may still be required by the final circuit design. Typical uses include smartphone and tablet audio hubs, portable media-player headsets, Bluetooth and wireless audio accessories, compact consumer-audio systems, and portable multimedia products. The device is especially relevant where low power, compactness, high-fidelity conversion, integrated headphone drive, and integrated stereo speaker drive are important design priorities. Designers must verify the exact pin assignments, supported audio rates, clocking scheme, speaker-load limits, analog biasing, and decoupling requirements against the manufacturer datasheet before layout. The 4.5 mm by 4.3 mm W-CSP also demands careful escape routing, acoustic inspection, and assembly-process control; trace geometry, component placement, and thermal or power-distribution planning can materially affect audio performance. This product record combines verified manufacturer and distributor information with package-level comparison, application guidance, and engineering-oriented design notes. It also distinguishes documented integrated features from unverified details, avoiding unsupported claims while helping engineers evaluate the WM8958ECS/R for portable audio designs.

RFQ Kontak
WM8960CGEFL/RV Stereo Codec with 1W Drivers | Cirrus Logic
WM8960CGEFL/RV

WM8960CGEFL/RV Stereo Codec with 1W Drivers | Cirrus Logic

The Cirrus Logic WM8960CGEFL/RV is a stereo audio codec with integrated Class-D speaker drivers, headphone drivers, and a microphone interface, designed for portable digital audio applications. The device is identified as a 24-bit stereo audio interface in a 32-QFN package measuring 5 x 5 mm, and the verified manufacturer-related data states that it provides 1 W per channel into 8-ohm loads with a 5 V supply. Its combination of digital audio conversion, analog input, headphone output, and integrated speaker amplification allows portable equipment to use one compact audio subsystem instead of separate codec and amplifier packages. A stereo audio codec is an interface IC that converts digital audio data into analog signals and converts analog microphone or line-level inputs back into digital audio data. The WM8960CGEFL/RV belongs to the broader audio interface and power-management hierarchy: audio codec, mixed-signal interface IC, semiconductor, and portable-audio signal-chain component. Its integrated Class-D speaker drivers target compact speaker solutions where PCB area, component count, and low power are important. The headphone drivers support personal-audio outputs, while the microphone interface supports portable voice and communication functions. Verified source data identifies the part as a stereo CODEC with 1 W stereo Class-D speaker drivers and headphone drivers for portable audio applications. The supplied DigiKey result identifies it as a 24-bit stereo audio interface in a 32-QFN 5 x 5 mm package. The WM8960CGEFL/RV is therefore suited to portable audio systems where the digital host interface, analog audio paths, and speaker amplification must coexist in one package. The exact sample rate, voltage range, control interface, and full pin-level electrical limits are not included in the supplied verified data and must be confirmed from the manufacturer datasheet before design release. A key design consideration is analog and power-supply layout. Digital audio clocks and control signals should be kept away from sensitive microphone and headphone paths, while the integrated speaker outputs require careful return-current routing and adequate power delivery. Decoupling must follow the manufacturer’s recommended values and placement because the codec combines digital, analog, headphone, and Class-D output functions in one package. Designers should also verify speaker impedance, load current, thermal conditions, and supply sequencing against the official datasheet before connecting external transducers. Typical uses include portable media players, compact audio accessories, personal-audio products, voice-enabled devices, and small speaker systems. This page consolidates the verified distributor descriptions, package information, identified audio functions, source links, and engineering guidance; it does not substitute unavailable electrical details with assumptions.

RFQ Kontak
WM8960CGEFL/V 24-Bit Stereo Codec with 1W Drivers
WM8960CGEFL/V

WM8960CGEFL/V 24-Bit Stereo Codec with 1W Drivers

The Cirrus Logic WM8960CGEFL/V is a 24-bit stereo audio codec with integrated 1 W Class D speaker drivers and headphone drivers, housed in a 32-pin QFN package measuring 5 mm by 5 mm. It is designed for portable digital-audio products that require microphone capture, digital-to-analog conversion, headphone output, and efficient speaker-drive capability in one compact device. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and analog sound into digital data. In the broader IC hierarchy, the WM8960 belongs to the audio-interface and codec family, combining an ADC, DAC, input and output routing, headphone amplification, and Class D speaker drivers within a single package. This integration can simplify portable-audio designs by reducing the number of separate analog and mixed-signal devices required on a circuit board. Key features include 24-bit audio resolution, stereo Class D output capable of 1 W per channel into 8 ohm loads at a 5 V supply, and dedicated headphone-driver support. The 5 mm by 5 mm QFN package has a 1.00 mm height and uses 32 terminals. Its operating temperature range extends from -40 °C to +85 °C, making it relevant to portable consumer equipment, mobile accessories, compact audio systems, and other space-constrained products. The device combines several signal paths in one package: digital audio interfaces, stereo conversion channels, analog inputs, headphone outputs, microphone amplification, and speaker-driver stages. Its integrated speaker capability is especially useful where a compact two-channel audio system is required without deploying separate discrete speaker amplifiers. Designers still need to select the correct digital interface mode, external filtering components, speaker loads, and decoupling network for the intended system. Typical applications include portable media players, headset and docking-station electronics, mobile-device accessories, portable radios, compact recording products, and battery-powered audio equipment. The integrated headphone and speaker outputs can shorten analog routing in designs where the codec must support both private listening and amplified stereo playback. Battery-operated systems also benefit from consolidating multiple audio functions into one package, although final power consumption depends on the selected mode and output loading. PCB implementation should prioritize short, quiet analog and digital-audio routes, solid ground-plane continuity, and placement of decoupling capacitors close to their associated supply pins. Speaker and headphone outputs require attention to EMI and output-noise coupling, while digital interface signals should remain separated from sensitive microphone and analog paths. Follow the manufacturer datasheet for the exact pin assignments, exposed-pad connection, recommended application circuit, and component values. This page organizes the verified device identity, package information, operating limits, sourcing details, cross-reference findings, and practical implementation guidance into a compact engineering reference. It also distinguishes documented drop-in options from broader functional alternatives so that PCB replacement decisions are based on actual compatibility rather than codec similarity alone.

RFQ Kontak
WM8962BECSN/R - Stereo 24-Bit Audio Codec | Cirrus Logic
WM8962BECSN/R

WM8962BECSN/R - Stereo 24-Bit Audio Codec | Cirrus Logic

Cirrus Logic WM8962BECSN/R is a low-power stereo audio codec with 24-bit resolution, I2C and SPI control interfaces, and a 49-ball CSP package measuring 3.6 mm by 3.9 mm. It operates from a 1.7 V to 2.0 V supply and supports sampling rates from 8 kHz to 96 kHz, making it suitable for compact embedded audio systems. An audio codec is an interface IC that converts digital audio data into an analog output and converts analog microphone signals into digital PCM data. Within the semiconductor hierarchy, a stereo codec belongs to an audio interface IC, which is part of the broader integrated-circuit category. It is typically paired with an application processor, DSP, amplifier, microphone, speaker, and digital control interface. The WM8962B architecture integrates an ADC and stereo DAC for 24-bit audio processing. Its control interface supports I2C and SPI, allowing firmware to configure registers, mixer paths, and audio playback. The manufacturer product page also identifies an integrated charge pump, a dual-mode charge-pump architecture, and a DC servo. These features support ground-referenced headphone outputs and reduce the need for output DC-blocking capacitors. Integrated stereo Class-D speaker drive, microphone support, and audio-enhancement DSP expand the codec beyond basic signal conversion. The 24-bit processing path supports the full 8 kHz to 96 kHz sampling range, while the 1.7 V to 2.0 V analog supply range targets compact portable equipment. The manufacturer lists an operating temperature range of -40 °C to +85 °C for the exact ordered device. Typical uses include portable media players, mobile multimedia equipment, connected audio products, voice-capture terminals, and compact consumer appliances. Its small CSP footprint is useful where board area is constrained, while integrated headphone and speaker functions can reduce the number of external audio components. Firmware must still verify clocking, filter configuration, mixer routing, and output settings through the I2C or SPI interface. Layout should keep analog supply, ground, microphone, and headphone paths short, with suitable decoupling placed close to the device pins. Digital control traces should remain separated from sensitive analog nodes. The integrated charge pump and DC servo simplify headphone output topology, but external filtering, clock planning, and signal-integrity checks remain essential for low-noise performance. This product page combines the exact ordering information, operating limits, digital interfaces, package data, functional architecture, sourcing path, and engineering guidance for the WM8962BECSN/R. It also distinguishes the exact orderable suffix from the broader WM8962B family designation and identifies where additional board-level design work is required.

RFQ Kontak