Mga Produkto (44,000+)

XC3S200-4VQG100I - 200K Gate Spartan-3 FPGA | AMD
XC3S200-4VQG100I

XC3S200-4VQG100I - 200K Gate Spartan-3 FPGA | AMD

AMD XC3S200-4VQG100I is a Spartan-3 field-programmable gate array (FPGA) with 200,000 system gates, 4,320 logic cells, 63 user I/Os, and a 100-pin TQFP package. It operates from a 1.2 V core supply and is intended for cost-sensitive embedded, industrial, consumer, communications, and control applications. The -4 speed grade identifies the performance class, while the I suffix identifies the industrial-temperature version. A Spartan-3 FPGA is a programmable-logic semiconductor that sits between simple microcontrollers and larger application-specific programmable logic. Its configurable architecture lets designers implement parallel datapaths, state machines, interfaces, protocol handling, and control logic in one device. The XC3S200 family provides a practical balance of logic capacity, I/O availability, package size, and cost for high-volume embedded systems. The device provides 4,320 logic cells and 63 I/Os according to the AMD product listing for this MPN. Its 100-TQFP package supports compact board layouts while exposing more I/O than a small FPGA package. The 1.2 V operating supply and -4 speed designation make it suitable for designs that require deterministic parallel processing without the resource requirements of a high-end FPGA. The XC3S200 architecture is useful for designs requiring multiple independent functional blocks, such as a communications controller, sensor aggregation circuit, or industrial interface hub. Its programmable logic fabric can be configured for parallel data acquisition, custom serial links, timing control, and hardware-assisted algorithm execution. Unlike a microprocessor-only implementation, these functions can execute concurrently and with deterministic hardware timing. Typical uses include industrial automation, embedded control, communications equipment, consumer electronics, instrumentation, and educational FPGA platforms. The 63 I/Os can connect external memory, sensors, converters, transceivers, displays, and control signals, while the internal logic fabric can implement protocol stacks, packet processing, or custom peripherals. When designing a board, verify the exact VQG100 land pattern, pin assignments, configuration interface, core and auxiliary supply requirements, and decoupling recommendations in the manufacturer datasheet. Configuration must be planned carefully because the device depends on a valid configuration bitstream for its programmable logic operation. This product page combines the MPN-specific electrical and package identifiers, verified source listings, drop-in family alternatives, application guidance, and board-level design notes to support faster engineering evaluation and sourcing decisions.

RFQ Kontak
XC3S200-5FT256C - 200K Gate 1.2V FPGA | AMD | 256-LBGA
XC3S200-5FT256C

XC3S200-5FT256C - 200K Gate 1.2V FPGA | AMD | 256-LBGA

The AMD XC3S200-5FT256C is a Spartan-3 field-programmable gate array with 200,000 system gates, 192 logic cells, and a 1.2 V supply in a 256-LBGA package. The -5 speed designation identifies the device performance grade, while the FT256C suffix identifies the lead-free commercial package variant. Its operating temperature range is 0°C to 85°C, making it suitable for cost-sensitive embedded systems that require programmable logic without the resources of a larger FPGA. A field-programmable gate array is a semiconductor whose digital logic and interconnect are configured after manufacture. An FPGA belongs to the broader programmable-logic hierarchy, which includes CPLDs, mask-programmed devices, and application-specific programmable logic. The Spartan-3 architecture combines configurable logic, memory resources, dedicated input/output structures, and programmable interconnect, allowing a designer to implement multiple control, interface, datapath, and signal-processing functions in one device. The XC3S200-5FT256C provides 50,000 system gates according to one distributor listing and 200,000 system gates according to Mouser and Partstack. The verified sources also report 192 logic cells, a 1.2 V FPGA supply, a 256-LBGA package, 256 terminals, and a square package shape. These source differences should be resolved against the applicable AMD Spartan-3 family data sheet before final design release. Because the device belongs to the Spartan-3 generation, engineers should treat it as a legacy programmable-logic platform and validate toolchain availability, configuration method, I/O standards, timing, and sourcing before beginning a new production design. The operating range of 0°C to 85°C distinguishes it from extended-temperature variants. Its 256-ball land-grid-array package also requires a PCB footprint and assembly process capable of handling fine-pitch balls, while configuration storage, clocking, decoupling, and I/O voltage planning remain central implementation concerns. Typical uses include industrial control and factory automation, embedded instrumentation, communications interfaces, display and video control, consumer products, and general-purpose digital signal processing. The Spartan-3 family was specifically positioned for high-volume, cost-sensitive consumer electronic applications, but individual designs still require complete timing, thermal, signal-integrity, and configuration verification. The principal design caution is that a replacement FPGA must match the package, ball assignment, supported I/O standards, voltage requirements, configuration interface, and timing constraints. A device with the same family name or logic density is not automatically pin-compatible. Migration decisions should therefore use AMD pinout data, device-generation constraints, and design-tool checks rather than relying only on distributor similarity labels. This page consolidates the verified distributor and manufacturer references for the XC3S200-5FT256C, distinguishes verified characteristics from parameters requiring confirmation, and provides migration, sourcing, and application guidance that is not present in a basic distributor listing.

RFQ Kontak
XC3S200-5FTG256C - Spartan-3 FPGA 200K Gates 256-LBGA | AMD
XC3S200-5FTG256C

XC3S200-5FTG256C - Spartan-3 FPGA 200K Gates 256-LBGA | AMD

The AMD XC3S200-5FTG256C is a Spartan-3 Field Programmable Gate Array (FPGA) with 200,000 system gates, 4,320 logic cells, 1.2 V core supply, and a 256-LBGA package. It is designed for cost-sensitive programmable-logic applications that require a dense, low-power FPGA in a surface-mount package. A Field Programmable Gate Array is a reconfigurable digital integrated circuit containing configurable logic blocks, programmable interconnect, and input/output blocks. FPGA terminology follows a hierarchy from programmable logic device to field-programmable gate array, providing designers with hardware parallelism that can implement control logic, data acquisition, signal processing, and communication functions without relying on a fixed-function ASIC. The XC3S200-5FTG256C combines 200,000 system gates with 4,320 logic cells and supports a 725 MHz maximum operating frequency according to its device listing. The -5 speed designation identifies the device speed grade, while the FTG256C package code identifies the lead-free 256-ball surface-mount package and commercial temperature grade. The device operates from a 1.2 V core supply and is specified for 0 to 85 C operation. The Spartan-3 architecture provides programmable logic, block RAM, dedicated multipliers, and general-purpose I/O in a single device. These resources support parallel datapath designs such as protocol bridges, industrial controllers, video timing systems, and embedded network equipment. Because the device is a mature 90 nm FPGA, design flows should follow the Spartan-3 toolchain and the configuration requirements documented for the platform. Typical applications include industrial automation, motor and motion control, telecommunications line-card support, data acquisition, test equipment, and embedded control platforms. The 256-LBGA package offers a high pin count for parallel interfaces, but it requires careful PCB layout with short escape routes, solid power distribution, and decoupling close to every supply pin. For new designs, verify the available configuration PROM and programming cable before committing the layout, because configuration memory availability can constrain production schedules. A complete migration should also be checked for I/O standard, timing, and configuration-pin compatibility rather than package similarity alone. This page consolidates device specifications, package details, verified source links, practical application guidance, and drop-in alternatives that are not collected in a single manufacturer datasheet excerpt.

RFQ Kontak
XC3S200-5PQG208C - 200K Gate Spartan-3 FPGA | AMD
XC3S200-5PQG208C

XC3S200-5PQG208C - 200K Gate Spartan-3 FPGA | AMD

The AMD XC3S200-5PQG208C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 configurable logic elements, 141 user I/O pins, and 221,184 RAM bits in a 208-pin PQFP package. It uses a 1.2 V core supply, a 90 nm process technology, and a -5 speed grade for designs requiring up to 725 MHz performance. A field-programmable gate array, or FPGA, is a programmable logic semiconductor whose configurable lookup tables, flip-flops, interconnects, block RAM, and I/O resources can be tailored after manufacture. An FPGA belongs to the broader programmable-logic hierarchy, alongside complex programmable logic devices, and provides parallel hardware implementation for control, interface, signal-processing, and data-transfer functions. The Spartan-3 family targets cost-sensitive embedded systems that need more flexibility than fixed logic without the complexity of larger devices. The XC3S200-5PQG208C combines a mid-density Spartan-3 fabric with 141 user I/O in a surface-mount PQFP-208 package. Its 4,320 configurable logic elements provide substantial parallelism, while 221,184 RAM bits support on-chip buffering and data storage. The 141 available I/O pins make the device particularly useful for legacy parallel buses, control interfaces, display or sensor links, and industrial equipment requiring numerous external connections. The -5 designation identifies the performance grade used in the part number. Published device information lists the maximum performance figure as 725 MHz, making this grade appropriate for designs whose timing budget cannot tolerate the slower -4 grade. The C suffix denotes the commercial-temperature qualification shown for the device, with an operating junction-temperature range from 0°C to 85°C. Typical uses include industrial automation, embedded control, video timing, general-purpose interface bridging, low-cost instrumentation, and FPGA-based prototype platforms. The large PQFP footprint is easier to inspect and rework than very dense BGAs, which can simplify prototype assembly, laboratory bring-up, and field servicing where high pin counts remain manageable. When laying out the board, follow the manufacturer pinout and decoupling guidance rather than assigning signals from a generic 208-pin footprint. Account for configuration-interface access, programming pins, supply sequencing, clock requirements, and I/O standards. Because the -4 and -5 parts share a package, timing closure must be revalidated when changing speed grades even when the PCB remains unchanged. This page combines the device specifications, package details, compatible Spartan-3 replacements, and implementation guidance needed to plan a board revision or evaluate a second source. It also distinguishes speed-grade and temperature-grade substitutions from higher-density devices that may use the same mechanical package.

RFQ Kontak
XC3S200-5VQ100C - 200K Gate Spartan-3 FPGA | AMD Xilinx
XC3S200-5VQ100C

XC3S200-5VQ100C - 200K Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S200-5VQ100C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, 63 user I/O pins, and 221,184 RAM bits, supplied in a 100-pin TQFP package. It operates from a 1.2 V supply and is specified for a 0 to 85 °C operating temperature range. A field-programmable gate array is a programmable digital semiconductor that combines configurable logic, programmable interconnect, and memory resources in one device. In the broader semiconductor hierarchy, an FPGA belongs to programmable logic devices and provides a hardware alternative to implementing a fixed function in an application-specific integrated circuit. The Spartan-3 family was designed for cost-sensitive embedded, industrial, consumer, and communication systems. The XC3S200-5VQ100C provides 4,320 logic cells and 221,184 RAM bits for parallel datapaths, control logic, state machines, and interface conditioning. Its 63 user I/O pins provide connections to external memory, sensors, converters, communication transceivers, and display or control peripherals. The -5 speed designation identifies the device's performance grade, while the commercial C temperature designation corresponds to the stated 0 to 85 °C range. The device uses a 1.2 V core supply, making power-supply design important in compact embedded systems. Available details confirm 200,000 system gates, 4,320 logic cells, 63 I/O pins, 221,184 RAM bits, and a 100-TQFP package. Additional detailed information such as exact I/O standards, configuration interface characteristics, and recommended operating limits is not present in the supplied verified records and must be confirmed from the manufacturer datasheet before design release. Typical uses include industrial controllers, embedded control systems, video and image-processing front ends, communication equipment, and consumer electronics. In each case, the Spartan-3 architecture permits logic and memory functions to be updated in the field, reducing the need for a custom ASIC in moderate-volume designs. Designers should preserve the manufacturer's recommended power and decoupling arrangement, validate every I/O voltage and bank configuration, and account for configuration-pin requirements during power-up. Because the supplied records do not include a complete verified pin table, the package drawing is represented by the generic library key rather than an invented pinout. This page combines the verified distributor specifications, packaging information, source links, and drop-in alternatives. It also distinguishes directly comparable speed-grade parts from larger-package or functionally similar devices that cannot replace the target without PCB changes.

RFQ Kontak
XC3S2000-4FG456C - 2M Gate Spartan-3 FPGA | AMD
XC3S2000-4FG456C

XC3S2000-4FG456C - 2M Gate Spartan-3 FPGA | AMD

The AMD XC3S2000-4FG456C is a Spartan-3 field-programmable gate array with 2,000,000 system gates, 46,080 configurable logic cells, 333 I/O, and a -4 speed grade. It operates from a 1.2 V core supply and is packaged in a 456-pin PBGA, also identified as a 456-BBGA. A field-programmable gate array is a semiconductor device whose digital logic and interconnect are configured after fabrication. The FPGA hierarchy places the XC3S2000 within programmable logic devices, where it provides more implementation flexibility than a fixed-function application-specific integrated circuit. Its 46,080 configurable cells can support parallel data paths, control logic, embedded memory, and programmable I/O in one device. The device combines 5,120 configurable logic blocks, 46,080 configurable logic cells, 333 I/O, and 2,000,000 system gates. A maximum clock rate of 630 MHz is associated with the device listing, while the -4 suffix identifies the selected performance grade. The 90 nm CMOS process and 1.2 V core supply place this part in the Spartan-3 generation of cost-conscious FPGAs. The 456-pin PBGA package provides 333 user I/O in a compact surface-mount form factor. Its large pin count supports wide parallel buses and numerous board-level connections, but it also requires careful PCB escape routing and thermal design. Because the package does not have a corresponding diagram key in the available library, the package drawing uses the default representation rather than an inferred ball map. Typical uses include industrial automation, communications equipment, embedded control, test and measurement, and general-purpose digital prototyping. The 46,080-cell resource level is appropriate for designs requiring substantially more logic than a small microcontroller while retaining the parallel programmability of an FPGA. Design planning should focus on pin constraints, supported I/O standards, clocking, configuration memory, and power delivery. A replacement must match the exact 456-pin PBGA footprint and pinout; speed-grade and temperature-grade changes can alter qualification without necessarily changing the board pattern. This product record combines device-specific specifications, same-package replacement guidance, a parameter comparison, and practical PCB considerations. It is intended to help engineers identify whether the XC3S2000-4FG456C fits an existing Spartan-3 design before requesting a quote or committing the footprint to fabrication.

RFQ Kontak
XC3S2000-4FG456I - 2M Gate Spartan-3 FPGA | AMD
XC3S2000-4FG456I

XC3S2000-4FG456I - 2M Gate Spartan-3 FPGA | AMD

The AMD XC3S2000-4FG456I is a Spartan-3 field-programmable gate array with 2,000,000 system gates, 46,080 logic cells, and 333 programmable I/Os, supplied in a 456-ball fine-pitch BGA package. It uses a 1.2 V core supply, is offered in the -4 performance grade, and carries the industrial-temperature designation. An FPGA is a programmable semiconductor that combines configurable logic, memory, and I/O blocks on one die. Its place in the hardware hierarchy is logic fabric inside a programmable logic device, enabling parallel architectures to be implemented and revised in software rather than with a fixed gate-level circuit. The Spartan-3 family targets cost-sensitive, high-volume embedded systems where moderate logic density and substantial I/O are more important than the resources of a large application-specific integrated circuit. Key features of the XC3S2000-4FG456I include 46,080 logic cells, 333 user I/Os, and a listed maximum operating frequency of 630 MHz. The 456-FBGA package places a large interconnect boundary around the device, supporting designs that combine parallel data acquisition, control logic, protocol bridging, and general-purpose digital processing. The -4 suffix denotes the device speed grade, while the final I identifies the industrial temperature option. The device is built on 90 nm FPGA technology and operates from a 1.2 V core supply, with additional supply rails specified for configuration and I/O operation. Configuration logic permits the same board design to support multiple hardware personalities when the configuration bitstream is changed. Design engineers normally implement the design in HDL, synthesize it for the Spartan-3 architecture, place and route it, and generate a configuration file for the target board. Typical applications include industrial control and automation, data acquisition, communications infrastructure, embedded video processing, instrumentation, and test equipment. The 333-I/O count allows high pin-count interfaces to be consolidated in one programmable device, while 46,080 logic cells provide substantial capacity for parallel datapaths and control sequences. The most important design consideration is package-level planning. A 456-ball fine-pitch BGA requires a multilayer PCB with careful escape-routing, via placement, and power-plane design. Confirm the device pinout, configuration interface requirements, decoupling recommendations, and BGA assembly process in the manufacturer datasheet before releasing the layout.

RFQ Kontak
XC3S2000-4FG676C - 2M Gate Spartan-3 FPGA | AMD | 676-BGA
XC3S2000-4FG676C

XC3S2000-4FG676C - 2M Gate Spartan-3 FPGA | AMD | 676-BGA

The AMD XC3S2000-4FG676C is a Spartan-3 field-programmable gate array with 2,000,000 system gates, 46,080 logic cells, and a 676-ball fine-pitch ball grid array package. It operates from a 1.2 V core supply and is built on a 90 nm FPGA process. The device provides 489 I/O, approximately 630 MHz performance, and 737,280 bits of block RAM. Its commercial temperature grade is rated from 0 °C to 85 °C. A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, and input/output blocks. An FPGA belongs to the logic IC hierarchy above programmable logic devices and is used when design-specific parallel hardware must deliver greater throughput or deterministic latency than a microcontroller or DSP can provide. In the system hierarchy, the XC3S2000-4FG676C is an FPGA and a programmable-logic semiconductor. Key characteristics include 46,080 logic cells, 2 million system gates, 489 user I/O, and 737,280 bits of RAM. The 90 nm process and 1.2 V core operation place the device in a cost-optimized Spartan-3 family intended for high-volume embedded systems. The -4 speed designation identifies a four-speed performance grade, while the commercial suffix identifies the standard temperature grade rather than the industrial range. The Spartan-3 architecture supports parallel datapath implementation in programmable logic, on-chip block RAM for buffering and lookup functions, and dedicated digital I/O resources. Distributed RAM and dedicated multipliers make the device suitable for image pipelines, protocol termination, control logic, and embedded signal processing. Exact I/O standard support and configuration-memory requirements should be confirmed in the manufacturer's Spartan-3 family documentation before final schematic sign-off. Typical uses include industrial automation controllers, video and image-processing boards, communications equipment, network appliances, and test-and-measurement instruments. Its 489 I/O allow substantial external connectivity on a single device, while 46,080 logic cells provide enough parallel capacity for multi-channel control or datapath designs. The large 676-ball package also supports high pin counts with dense escape routing. The primary design consideration is package complexity. A 676-ball FBGA requires careful via-in-pad and escape-routing strategy, strict BGA assembly process control, and adequate thermal spreading beneath the device. Designers should also verify signal integrity for high-speed memory interfaces and observe the recommended configuration, decoupling, and clocking schemes in the manufacturer data sheet. This page combines the verified device specifications with drop-in Spartan-3 alternatives, a parameter comparison, and practical guidance on BGA layout, signal integrity, configuration, thermal management, and design migration.

RFQ Kontak
XC3S2000-4FG900I - 2M-Gate Spartan-3 FPGA | AMD Xilinx
XC3S2000-4FG900I

XC3S2000-4FG900I - 2M-Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S2000-4FG900I is a Spartan-3 field-programmable gate array with 2,000,000 system gates, 46,080 logic cells, 565 I/O, and a 1.2 V supply in a 900-ball BGA package. The -4 speed designation places it in the device family’s -4 performance grade, while the I suffix identifies the industrial temperature option. A field-programmable gate array is a programmable digital semiconductor in which configurable logic blocks, programmable interconnect, and input/output resources implement digital systems. An FPGA belongs to the broader hierarchy of programmable logic devices, alongside CPLDs, and provides substantially greater logic capacity. The Spartan-3 architecture combines configurable logic, block RAM, dedicated DSP resources, programmable I/O, and on-chip support for clocking and configuration. The XC3S2000-4FG900I’s headline resources are 2,000,000 system gates, 46,080 logic cells, 565 I/O, and a 900-ball BGA package. Its 1.2 V core supply suits low-voltage digital systems where board-area efficiency and high I/O density are priorities. The large ball-grid array also supports dense connections between programmable resources and external circuitry without relying on a larger leaded package. Within the Spartan-3 family, the -4 speed grade provides a defined balance between logic performance and device organization. Exact maximum clock rates depend on the selected design, I/O standard, speed grade, timing constraints, and tool version. Because an FPGA’s usable performance is determined by the routed critical path rather than a single headline frequency, timing closure must be completed with the appropriate synthesis and implementation constraints. Typical uses include network-interface control, industrial automation, communications equipment, embedded video processing, instrumentation, and general-purpose digital signal-processing systems. A design requiring parallel interfaces, substantial logic density, moderate-to-high-speed serial links, and deterministic embedded control can benefit from combining programmable logic, block RAM, DSP, and dedicated I/O in one device. A 900-ball BGA requires careful PCB planning, including a multilayer board with controlled-impedance routing, via access beneath the device, adequate power and ground distribution, and assembly-process compatibility. Designers should also verify configuration logic, memory-interface topology, I/O standards, voltage tolerances, thermal performance, and pin constraints in the manufacturer datasheet before schematic capture and layout release. This product page consolidates the device’s principal architecture, package, and application information with engineering-focused comparison data and design guidance. It is intended to help engineers confirm fit, plan the PCB, and assess Spartan-3 alternatives without treating package similarity alone as proof of drop-in compatibility.

RFQ Kontak
XC3S200A-4FG320C - 200K Gate Spartan-3A FPGA | AMD Xilinx
XC3S200A-4FG320C

XC3S200A-4FG320C - 200K Gate Spartan-3A FPGA | AMD Xilinx

AMD Xilinx XC3S200A-4FG320C is a Spartan-3A field-programmable gate array (FPGA) with 200,000 system gates, 4,032 logic cells, 294,912 RAM bits, and 248 user I/O in a 320-BGA surface-mount package. The -4 designation identifies the performance speed grade, while the commercial-temperature C suffix identifies the specified commercial grade. A Spartan-3A FPGA is a programmable digital semiconductor used to implement logic, control, signal processing, communications, and embedded-system functions in parallel hardware. It belongs to the hierarchy FPGA and CPLD > programmable logic device > digital integrated circuit > semiconductor. Unlike a fixed-function microcontroller, the XC3S200A-4FG320C combines configurable logic blocks, block RAM, programmable I/O, and dedicated hard resources on one device. The device provides 448 logic blocks, according to the product listing, alongside the 4,032 logic cells and 294,912 total RAM bits. Its 248 I/O provide substantial board-level connectivity for buses, control signals, counters, serial links, and external memory interfaces. The 320-BGA package also supports compact, high-density PCB layouts, although ball-grid construction complicates prototype assembly and inspection. Spartan-3A devices combine programmable logic with selectable DSP resources for arithmetic-heavy designs and dedicated block memory for buffers, tables, and packet data. Configuration data determines the implemented circuit, allowing one FPGA family to serve many product variants. Engineers must still account for pin constraints, supported I/O standards, clocking resources, configuration memory, and timing when translating a design into the physical device. Typical applications include industrial control, video and image processing, communications infrastructure, test equipment, consumer electronics, embedded signal processing, and cost-sensitive high-volume products. The 200,000-gate Spartan-3A device is especially appropriate when parallel hardware performance and programmable logic density are more important than using a very large FPGA with unnecessary resources. A critical design consideration is that the FG320 package is not a direct pin match for smaller Spartan-3A packages such as FTG256 or VQG100. Maintain a conservative separation between clock, configuration, serial interface, and sensitive I/O routing, and verify every selected pin against the manufacturer pin-description table. Prototype inspection, X-ray analysis, or a compatible BGA assembly process is also needed when solder joints cannot be visually inspected. This page combines the core Spartan-3A architecture facts, package and I/O constraints, grade comparisons, and practical migration guidance. It is intended to help engineers determine whether the XC3S200A-4FG320C remains appropriate for an existing design and how to evaluate pin-compatible options without overlooking speed-grade, temperature-grade, lifecycle, or PCB differences.

RFQ Kontak
XC3S200A-4FG320I - 294912-Logic-Cell Spartan-3A FPGA | AMD
XC3S200A-4FG320I

XC3S200A-4FG320I - 294912-Logic-Cell Spartan-3A FPGA | AMD

AMD XC3S200A-4FG320I is a Spartan-3A field-programmable gate array with 294,912 logic cells, 4,032 configurable logic blocks, 248 user I/Os, and a -4 speed grade, packaged in a 320-ball FBGA. The device is designed for cost-sensitive embedded systems requiring high programmable logic density, extensive I/O, and reconfigurable hardware architecture. Its industrial-grade ordering designation supports use in equipment operating across extended industrial temperature conditions. A field-programmable gate array, or FPGA, is a programmable-logic semiconductor whose digital functions are defined after fabrication. By combining configurable logic blocks, programmable interconnect, memory resources, and programmable I/O blocks, an FPGA replaces combinations of fixed-function logic devices with one reconfigurable integrated circuit. Within the product hierarchy, the XC3S200A is a Spartan-3A FPGA, a member of the Spartan family of programmable logic devices. Key features include support for 26 I/O standards, a Device DNA serial number, enhanced MultiBoot operation with a watchdog timer, dual power-management modes, and Dynamic Input Delay for data-to-clock centering. These features make the device suitable for embedded control, communications, industrial automation, instrumentation, video processing, and general-purpose logic consolidation. The 248 user I/Os provide extensive connectivity to external controllers, memories, transceivers, sensors, and display or communication peripherals. The Spartan-3A architecture supports parallel programmable logic and dedicated input and output resources. Dynamic Input Delay allows timing-driven delay adjustment on selected input paths, supporting precise capture of data relative to a clock. Device DNA provides a device-specific identifier useful for configuration control, asset identification, and production traceability. MultiBoot with watchdog monitoring helps FPGA-based products maintain known configuration behavior while enabling controlled startup transitions. Typical applications include industrial controllers, data-acquisition systems, communications infrastructure, video-processing modules, embedded networking equipment, and compact control platforms. Its 320-ball FBGA package supports dense board routing and high I/O availability, but it requires careful escape-routing, power-plane, via, and assembly planning. The 320-ball land pattern also makes thermal management and PCB assembly quality important in space-constrained industrial equipment. Designers should use the AMD DS529 family data sheet and the device-specific pinout information to assign power, ground, configuration, clock, and user I/O connections. Validate every power rail against the selected Spartan-3A device configuration, preserve the required decoupling topology, and route configuration signals according to the documented startup requirements. PCB redesign is necessary if the current design does not use the exact 320-ball FBGA footprint. This product page combines the verified device identity, package characteristics, Spartan-3A feature set, sourcing guidance, comparison information, and practical implementation considerations. It also identifies where timing, pin-level, and lifecycle details must be confirmed against the authoritative family documentation before a new PCB or production release is approved.

RFQ Kontak
XC3S200A-4FT256C - 4032-Cell Spartan-3A FPGA | AMD Xilinx
XC3S200A-4FT256C

XC3S200A-4FT256C - 4032-Cell Spartan-3A FPGA | AMD Xilinx

The AMD Xilinx XC3S200A-4FT256C is a Spartan-3A field-programmable gate array built on a 90 nm CMOS process and packaged in a 256-ball FT BGA. The device provides 4032 logic cells, 448 configurable logic blocks, approximately 200000 system gates, and 195 user I/O. Its -4 speed designation places it in the 280 MHz performance class, while the device is listed with a maximum operating frequency of 667 MHz for suitable clock conditions. A field-programmable gate array is a reconfigurable digital integrated circuit whose logic, memory, signal processing, and I/O resources are configured after manufacture. Within the semiconductor hierarchy, an FPGA is a programmable logic device, while the Spartan-3A family occupies the low-to-medium density segment of the Xilinx product portfolio. It is intended for embedded systems requiring parallel processing, deterministic control, dedicated interfaces, or hardware-assisted data handling without the cost of a large application-specific integrated circuit. Key features include support for 26 single-ended and differential I/O standards, including TMDS, PPDS, SSTL3 Class I and Class II, and full hot-swap compatibility. The 195 user I/Os make the part suitable for bridging external memory, programmable logic controllers, communications links, display interfaces, and general-purpose digital control. The Spartan-3A architecture also supports interface intellectual property for PCI, PCI Express, USB, FireWire, CAN, SPI, and I2C designs. The XC3S200A-4FT256C operates from a 1.2 V core supply and is specified for the commercial temperature range of 0 °C to 85 °C. Its 256-ball package measures 17 mm by 17 mm and uses a square ball-grid layout. Configuration and programming are handled through the dedicated configuration interface described in the Spartan-3A family documentation, allowing the same hardware platform to be reprogrammed for multiple bitstreams. Typical applications include industrial control and data-acquisition systems, video processing, network-interface adapters, industrial Ethernet equipment, display controllers, communications modules, and embedded storage systems. The combination of 4032 logic cells, 195 I/Os, and a 256-ball package provides substantial integration in a compact surface-mount footprint. A key design consideration is that legacy FPGA availability and lifecycle status can constrain new production designs. Verify current sourcing, configuration-file support, toolchain compatibility, and the exact ball-grid layout before committing a board revision to this device. This page also consolidates technical specifications, drop-in alternatives, application guidance, and design notes for faster engineering evaluation.

RFQ Kontak
XC3S200A-4FT256I - 200K Spartan-3A FPGA | AMD Xilinx
XC3S200A-4FT256I

XC3S200A-4FT256I - 200K Spartan-3A FPGA | AMD Xilinx

The AMD Xilinx XC3S200A-4FT256I is a Spartan-3A field-programmable gate array with 4,032 configurable logic cells, approximately 200,000 logic gates, 195 user I/Os, and 294,912 RAM bits in a 256-ball FT256 BGA package. It uses 90 nm fabrication technology, operates from a 1.2 V core, and is identified with a 667 MHz maximum device speed grade. A field-programmable gate array is a programmable logic device whose digital functions are established by loading a configuration bitstream rather than permanently connecting transistors. The Spartan-3A family belongs to the FPGA hierarchy, combining programmable logic, dedicated memory resources, digital signal-processing capability, and general-purpose I/O. This makes the device suitable for designs that benefit from hardware parallelism, reconfigurability, short development cycles, and integration of multiple digital functions on one device. The XC3S200A provides 4,032 logic cells and 195 user I/Os, providing substantial connectivity for control logic, interfaces, arithmetic pipelines, and embedded state machines. Its 294,912 RAM bits provide dedicated block storage without consuming the same resources needed for general combinational logic. The -4 suffix denotes a performance speed option, while the I suffix identifies the industrial temperature grade. The 256-ball FT256 package supports compact, high-density board layouts through ball-grid-array interconnect. The XC3S200A architecture is based on 90 nm CMOS technology and a 1.2 V core supply. Its logic is organized into configurable slices containing combinational and sequential resources, while dedicated block RAM supports higher-density storage than distributed RAM alone. Dedicated multipliers and digital signal-processing resources can accelerate filtering, transforms, and fixed-point arithmetic when the design and synthesis toolchain use them appropriately. Typical applications include industrial control, communications interfaces, data acquisition, instrumentation, embedded signal processing, and general-purpose digital prototyping. Its 195 I/Os are useful for parallel sensor interfaces, display or control peripherals, high-speed communication logic, and system bus coordination. The FPGA architecture is especially helpful where parallel processing, reconfigurable logic, or deterministic digital control must be consolidated into a compact implementation. A key design consideration is the complete Spartan-3A power, configuration, clocking, and decoupling plan. Board design must provide the specified core and I/O supplies, a valid configuration path, compatible clocking, and clean power delivery to the FT256 package. Because the device is a mature programmable platform, toolchain version and legacy bitstream compatibility should also be confirmed before an update to production. This page consolidates the device identity, package details, application guidance, design considerations, and technically constrained replacement information into an engineering-focused reference. It emphasizes the limits of package and temperature substitution so that a proposed replacement is reviewed as a true board-level decision rather than selected from a family name alone.

RFQ Kontak
XC3S200A-4FTG256I - 200K Gate Spartan-3A FPGA, 195 I/O | AMD/Xilinx
XC3S200A-4FTG256I

XC3S200A-4FTG256I - 200K Gate Spartan-3A FPGA, 195 I/O | AMD/Xilinx

The AMD/Xilinx XC3S200A-4FTG256I is a Spartan-3A family Field Programmable Gate Array (FPGA) with 200,000 system gates, 4,032 logic cells, and 195 user I/Os in a 256-ball FineLine Thin-profile BGA (FTG256) package at industrial temperature grade (I suffix). Built on 90nm CMOS technology with a 1.2V core, the device targets cost-sensitive, high-volume digital logic applications. An FPGA (Field Programmable Gate Array) is a class of programmable logic device that allows engineers to implement arbitrary digital circuits using a matrix of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardware blocks such as block RAM and multipliers. Within the broader semiconductor taxonomy, FPGAs sit alongside ASICs and CPLDs as reconfigurable logic; the Spartan-3A family is Xilinx's low-cost, high-volume segment designed for consumer, industrial, and communications glue-logic applications. Key specifications of the XC3S200A-4FTG256I include 448 Configurable Logic Blocks (CLBs), 288 Kbits of block RAM, up to 667 MHz maximum operating frequency (speed grade -4), dedicated 18x18 hardware multipliers for DSP, and a Digital Clock Manager (DCM) block for clock synthesis. The FTG256 package measures 17x17 mm and uses a 1.0 mm ball pitch. Architecturally, the Spartan-3A integrates CLBs arranged in rows and columns, surrounded by IOBs (I/O blocks), with block RAM columns interleaved, four DCMs, and dedicated multiplier blocks. The device supports multiple I/O standards including LVTTL, LVCMOS, LVDS, and differential HSTL/SSTL for direct interface to external memories and high-speed peripherals. Typical applications include industrial control and machine vision, consumer electronics display controllers, communications protocol bridges, low-cost video processing, motor control, and educational/hobbyist development boards. The wide operating temperature range (-40C to +100C industrial grade) also suits factory automation and outdoor equipment. Designers should pay attention to the FTG256 ball-pinout for PCB layout: a 256-ball BGA with 1.0 mm pitch requires 4-6 layer PCB design with microvia or via-in-pad technology for reliable assembly. Use Xilinx ISE WebPACK or the modern AMD Vivado/Vivado Lab Edition for configuration bitstream generation. Power estimation should be performed with the Xilinx Power Estimator (XPE) tool before finalizing thermal management. This page consolidates current distributor pricing, verified pin-compatible drop-in alternatives in the Spartan-3A family, and practical design notes - practical context not found in the bare manufacturer datasheet.

RFQ Kontak
XC3S200A-4VQ100I - 200K Gate Spartan-3A FPGA | AMD
XC3S200A-4VQ100I

XC3S200A-4VQ100I - 200K Gate Spartan-3A FPGA | AMD

The AMD Xilinx XC3S200A-4VQ100I is a Spartan-3A field-programmable gate array with 4,032 logic cells, 294,912 system gates, 68 I/O, and a maximum advertised clock frequency of 667 MHz. The device is manufactured using 90 nm FPGA technology, operates from a 1.2 V core supply, and is packaged in a 100-pin TQFP for surface-mount PCB assembly. An FPGA is a programmable-logic semiconductor that combines configurable logic, memory, and digital input/output resources on one integrated circuit. The Spartan-3A family belongs to the FPGA hierarchy, where programmable logic provides a hardware implementation path for control, interface, signal-processing, and communication functions. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured during design, debug, or upgrade phases. The XC3S200A-4VQ100I combines a 200K-gate device class with 4,032 logic cells and 68 available I/O. Its -4 speed designation identifies a performance grade, while the industrial-temperature suffix supports use in industrial environments. The 100-pin TQFP package provides a compact, leaded surface-mount option for designs using conventional PCB assembly and inspection processes. The Spartan-3A architecture integrates programmable logic blocks, dedicated block RAM resources, digital signal-processing capability, and programmable I/O structures. These resources allow parallel data paths, state machines, protocol interfaces, and control functions to be implemented in hardware. The 667 MHz maximum frequency is a headline device figure and should be treated as a timing-class reference rather than a guaranteed operating frequency for every routed design. Typical uses include industrial control systems, embedded instrumentation, legacy video and communications interfaces, peripheral controllers, and general-purpose digital logic platforms. Its 68 I/O provide connectivity for buses, status signals, clocks, resets, and external converters. The 1.2 V core architecture also makes careful rail design and decoupling essential when integrating the FPGA with modern mixed-signal or processor-based systems. PCB design should follow the manufacturer pinout and package information, with particular attention to supply pins, configuration pins, clock inputs, and exposed requirements for the selected board revision. Verify speed, temperature, and fitment requirements before committing a design to production. This product page combines the core Spartan-3A device data with package-aware alternatives, comparison parameters, and practical replacement guidance intended to accelerate engineering review and sourcing decisions.

RFQ Kontak
XC3S250E-4CP132I - 250K Gate Spartan-3E FPGA | AMD
XC3S250E-4CP132I

XC3S250E-4CP132I - 250K Gate Spartan-3E FPGA | AMD

The AMD XC3S250E-4CP132I is a Spartan-3E field-programmable gate array with 250,000 gates, 5,508 logic elements, 612 logic array blocks, 221,184 bits of on-chip RAM, and 92 user I/O, packaged in a 132-terminal TFBGA CSPBGA. It operates from a 1.14 V to 1.26 V core supply and supports an industrial junction-temperature range of -40°C to 100°C. A field-programmable gate array is a semiconductor whose logic, interconnect, and I/O behavior can be configured after fabrication. The Spartan-3E family belongs to the FPGA hierarchy, combining programmable logic blocks with block RAM, dedicated input and output resources, and configurable interconnect. This makes the XC3S250E-4CP132I useful when fixed-function logic is insufficient but a dedicated ASIC would be uneconomic. The device provides 5,508 logic elements organized into 612 logic array blocks, together with 221,184 bits of block RAM. Its 92 user I/O support connections to external memory, control interfaces, converters, transceivers, and digital peripherals. The -4 suffix identifies the performance grade, while the I suffix identifies the industrial-temperature option. The exact package is the 132-terminal TFBGA CSPBGA arrangement. The XC3S250E-4CP132I uses a selectable 1.14 V to 1.26 V core supply. Because the core supply range is narrow, a power design must account for regulator tolerance, startup sequencing, and decoupling close to the device. Block RAM provides deterministic on-chip storage for buffers, state machines, lookup tables, and interface pipelines without consuming external memory bandwidth. Typical applications include industrial control and automation, data acquisition, communications gateways, embedded test equipment, video or display processing, and instrumentation. The 92 I/O count is especially useful for parallel buses, high-speed serial interfaces using selectable I/O standards, memory controllers, and systems combining programmable logic with external processors. Design the power rails and ball assignments directly from the Spartan-3E family data sheet. Preserve the required decoupling structure, verify every BGA escape route, and account for BGA solder-mask and paste requirements during PCB fabrication. A complete ball-level assignment must be taken from the package pinout because the public listing does not expose the individual 132-terminal map. This page combines the verified Spartan-3E device specifications, package information, price-location guidance, family-member comparisons, and practical implementation considerations. It also identifies the temperature- and speed-grade alternatives that can use the same 132-terminal footprint while making their different qualification and timing requirements explicit.

RFQ Kontak
XC3S250E-4TQ144C - 250K Spartan-3E FPGA | AMD | LQFP-144
XC3S250E-4TQ144C

XC3S250E-4TQ144C - 250K Spartan-3E FPGA | AMD | LQFP-144

AMD XC3S250E-4TQ144C is a Spartan-3E field-programmable gate array with 250,000 logic gates, 5,508 configurable logic cells, 612 CLBs, and 108 user I/Os, packaged in a 144-pin LQFP. The -4 speed grade is listed at 572 MHz, while the device uses 90 nm CMOS technology and a 1.2 V core supply. A field-programmable gate array is a semiconductor in which the digital logic, interconnect, and selected input/output functions are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, above individual logic gates and below application-specific programmable devices. Spartan-3E devices combine configurable logic blocks, embedded block RAM, dedicated multipliers, and programmable I/O in a single package. The XC3S250E-4TQ144C provides 221,184 bits of RAM and 108 I/Os in a 22 x 22 mm TQFP-144 package with a 0.5 mm lead pitch. Its 250K logic density and 144-pin footprint make it useful for embedded control, communications, instrumentation, and general digital signal-processing designs. The -4 suffix identifies the device speed grade, while the final C character identifies the commercial temperature option used in the ordering code. Spartan-3E devices combine programmable logic with dedicated arithmetic and memory resources. The 612 CLBs supply the configurable fabric, while the 5,508-cell count and 250,000-gate rating describe the device's nominal logic capacity. The 108 available I/Os support external interfaces, subject to the voltage, timing, and pin constraints defined for the selected configuration. The 1.2 V core technology supports higher system performance than older FPGA generations while retaining a familiar 144-pin surface-mount footprint. Typical applications include industrial control modules, sensor and instrumentation interfaces, serial data acquisition, embedded communications, and compact control logic. The available I/O count can support multiple parallel buses, serial transceivers, status indicators, and external memory interfaces when the design's pin constraints are respected. The 572 MHz listed device performance also makes the part suitable for pipeline-oriented logic and fixed-function signal processing implemented in programmable logic. Designers should treat the XC3S250E-4TQ144C as a legacy Spartan-3E device and verify toolchain availability, bitstream support, and the required I/O standard against the complete AMD/Xilinx documentation before committing a new production design. PCB layouts should follow the manufacturer's 144-pin package drawing, including power and ground distribution, decoupling, and signal-routing guidance. This page combines the XC3S250E-4TQ144C ordering information, architecture specifications, drop-in alternatives, application guidance, and package-aware comparison information to support engineering selection and sourcing decisions.

RFQ Kontak
XC3S250E-4VQ100C - 250K Gate Spartan-3E FPGA | AMD
XC3S250E-4VQ100C

XC3S250E-4VQ100C - 250K Gate Spartan-3E FPGA | AMD

The AMD XC3S250E-4VQ100C is a Spartan-3E field-programmable gate array with 250,000 system gates, 5,508 logic cells, 66 user I/O pins, and a 572 MHz maximum clock frequency in a 100-pin TQFP package. Designed for cost-sensitive programmable-logic applications, it combines 221,184 RAM bits with 612 logic array blocks and is manufactured using 90 nm CMOS technology at a 1.2 V core voltage. A field-programmable gate array is a semiconductor whose digital logic can be configured after fabrication. An FPGA belongs to the programmable-logic device hierarchy, where configuration memory, programmable logic blocks, block RAM, and programmable I/O implement parallel hardware functions. The Spartan-3E family targets consumer, communications, industrial, and embedded systems where a small FPGA provides more flexibility than fixed logic without the cost of the largest devices. The XC3S250E-4VQ100C provides 250,000 system gates, 5,508 configurable logic elements, 612 logic array blocks, and 221,184 total RAM bits. Its 66 user I/O pins support external interfaces, while the -4 speed grade is associated with a maximum clock frequency of 572 MHz. The 100-pin TQFP package uses a 0.5 mm pitch, allowing conventional surface-mount assembly while keeping the device physically smaller than many larger FPGA packages. The device is based on 90 nm CMOS technology and operates from a 1.2 V core supply. Its architecture supports parallel datapaths, control logic, communication interfaces, and general-purpose embedded processing implemented as programmable logic. Configuration data establishes the interconnection and logic functions, allowing one board design to support multiple firmware or configuration revisions without changing the PCB. Typical uses include industrial control, networking equipment, video and display interfaces, consumer electronics, test systems, and embedded protocol bridges. Its 66 I/O pins are useful for designs requiring a moderate number of external connections, while the 221,184-bit RAM resource can support buffering, packet storage, and state-machine data. The 572 MHz maximum clock supports demanding datapaths when device utilization and routing permit the target frequency. PCB design should reserve the Spartan-3E configuration interface, provide a stable 1.2 V supply, and follow the manufacturer's decoupling and pinout guidance. Designers migrating from another FPGA should treat the device as an obsolete architecture and verify timing, I/O standards, configuration behavior, and tool-chain compatibility before committing new production hardware. This product overview consolidates the core Spartan-3E architecture, pin and package information, application guidance, and confirmed same-package alternatives. It also highlights the migration considerations engineers should evaluate before selecting this legacy FPGA for an existing or new design.

RFQ Kontak
XC3S400-4FG320C - 400K-Gate Spartan-3 FPGA | AMD Xilinx
XC3S400-4FG320C

XC3S400-4FG320C - 400K-Gate Spartan-3 FPGA | AMD Xilinx

AMD Xilinx XC3S400-4FG320C is a Spartan-3 field-programmable gate array with 400,000 system gates, 221 I/O, and a 1.2 V operating voltage, packaged in a 320-ball fine-pitch BGA. The -4 suffix identifies its device speed grade, while the commercial C suffix denotes the grade category indicated in the manufacturer part number. It is designed for cost-sensitive embedded systems requiring configurable logic, parallel processing, and flexible interface support. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after manufacture. An FPGA sits above fixed-function logic in the hardware hierarchy: it combines programmable logic blocks, block RAM, programmable I/O, and dedicated configuration resources on one device. Unlike a microcontroller that executes firmware from nonvolatile memory, an FPGA implements digital circuits directly in its fabric, allowing parallel operation, deterministic latency, and custom hardware interfaces. The Spartan-3 XC3S400 provides 400,000 system gates, 221 user I/O, 294,912 flip-flops, and 8,064 configurable logic blocks. Its 1.2 V core voltage supports low-voltage, power-conscious digital designs. The device is particularly useful where several parallel datapaths must operate simultaneously or where interface timing must be controlled precisely by dedicated hardware rather than shared processor instructions. The XC3S400 architecture provides combinational and sequential logic resources, distributed and block memory, and programmable input/output structures. Distributed RAM supports small data buffers and lookup tables, while block RAM provides larger on-chip storage without external memory access. Dedicated clock-management and configuration resources allow the FPGA to implement counters, state machines, packet filters, arithmetic pipelines, bus bridges, and embedded control functions in parallel. Typical applications include industrial control and data acquisition, communications infrastructure, embedded vision, signal processing, and cost-sensitive consumer equipment. Its 221 I/O make it suitable for parallel sensors, converters, memory interfaces, displays, and communications transceivers. Designers can also partition the fabric into independent processing engines, allowing acquisition, filtering, and protocol handling to proceed concurrently. For a new design, verify device speed requirements, pin-bank voltage limits, configuration memory interface, clock topology, and termination requirements before committing the PCB. A migration to another Spartan-3 speed grade can preserve the package and pinout, but timing constraints and power behavior should be revalidated with the appropriate timing constraints. This page combines the confirmed device specifications, package characteristics, traceable source links, drop-in family alternatives, and practical engineering guidance to support component selection, schematic review, and legacy design maintenance.

RFQ Kontak
XC3S400-4FG320I - 400K Gate Spartan-3 FPGA | Xilinx
XC3S400-4FG320I

XC3S400-4FG320I - 400K Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S400-4FG320I is a Spartan-3 field-programmable gate array with 400,000 system gates, 8,064 logic cells, 294,912 RAM bits, and 221 user I/Os, packaged in a 19 mm × 19 mm 320-pin fine-pitch ball grid array. It operates from a 1.2 V core supply and is identified by the -4 performance grade and I industrial temperature designation. A field-programmable gate array, or FPGA, is a reconfigurable semiconductor in which digital logic and interconnects are programmed after manufacture. An FPGA belongs to the programmable-logic hierarchy, which combines parallel gate-level logic, block RAM, programmable I/O, and embedded processing resources. This combination allows one physical device to implement control logic, protocol interfaces, data acquisition, signal processing, or complete embedded systems without changing the printed circuit board. The XC3S400 provides 221 user I/Os for external buses, counters, serial links, memory interfaces, and mixed-signal control functions. Its 294,912 bits of block RAM support buffering, packet storage, lookup tables, and data-pipeline stages, while the -4 speed grade identifies its position within the Spartan-3 performance range. The industrial I suffix distinguishes it from commercial-temperature C variants. The 320-ball FBGA offers dense board connectivity but requires careful escape-routing, thermal analysis, and assembly control. Spartan-3 devices combine dedicated arithmetic and logic resources with programmable interconnect and a large selection of I/O standards. The 8,064 logic cells allow concurrent datapath and control operations, while block RAM avoids extensive use of logic for storage-heavy functions. Because the I/O count is fixed at 221 for the XC3S400, system planning must reserve enough pins for clocks, configuration access, power, ground, and high-speed interfaces. Typical uses include industrial automation, programmable logic controllers, sensor acquisition, motor-control interfaces, embedded communications, test equipment, and cost-sensitive control systems. The FPGA is especially useful where parallel logic, deterministic timing, configurable I/O, and field-updateable firmware must coexist in a compact package. Its 1.2 V core supply also allows modern low-voltage designs to consolidate multiple logic functions. PCB implementation should use the manufacturer's pinout and recommended layout guidance rather than a generic BGA fanout. Decoupling must be placed directly at the supply and ground balls, unused configuration pins must be handled exactly as specified, and every power ball must connect to the appropriate plane or via array. The high pin count also makes inspection, solderability, and thermal cycling important production considerations. This page combines the device's principal architecture and package data with same-family migration options, application guidance, and design checks. It focuses on the decisions that materially affect a Spartan-3 design: logic capacity, RAM, I/O availability, speed grade, temperature grade, package migration, configuration stability, and PCB implementation.

RFQ Kontak
XC3S400-4FG456C - 400K Spartan-3 FPGA | AMD Xilinx
XC3S400-4FG456C

XC3S400-4FG456C - 400K Spartan-3 FPGA | AMD Xilinx

AMD Xilinx XC3S400-4FG456C is a Spartan-3 field-programmable gate array with 400,000 system gates, 294,912 logic cells, 8,064 dedicated block RAM bits, 264 I/O sites, and a 456-BBGA package. It operates from a 1.2 V core supply and targets logic-intensive embedded systems requiring programmable combinational and sequential logic, dedicated memory, and a large general-purpose I/O complement. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. The XC3S400 belongs to the Spartan-3 FPGA hierarchy, which combines configurable logic, block RAM, programmable I/O, and dedicated arithmetic resources on one device. This position between fixed-function ASICs and microcontrollers makes it suitable when a design needs hardware-level parallelism, flexible interfaces, or product-specific logic that would be expensive to implement in silicon. The -4 designator identifies a Spartan-3 performance grade, while FG456 identifies the 456-ball fine-pitch BGA package and C identifies the commercial temperature designation. The 456-BBGA footprint supports a high pin count and dense board routing, making the device appropriate for industrial control, communications, instrumentation, embedded processing, and legacy platform designs that already use the Spartan-3 package. Its large I/O count can reduce the need for external interface logic when connecting the FPGA to buses, converters, memories, and control signals. The device includes 294,912 logic cells and 8,064 bits of dedicated block RAM. These resources allow parallel datapaths, state machines, protocol handling, data acquisition, and control functions to be implemented concurrently rather than executed sequentially by a general-purpose processor. Programming is performed through the Xilinx configuration flow, while the final configuration determines which interconnect and logic resources are active. Designers should preserve the exact 456-BBGA land pattern, power architecture, decoupling strategy, configuration interface, and I/O constraints when replacing another programmable device. Because this package contains many fine-pitch balls, assembly and inspection require qualified PCB manufacturing processes and appropriate BGA assembly capability. Any modernization should begin with a pin, configuration, I/O-standard, and timing comparison rather than assuming that a newer FPGA is automatically interchangeable. This product page combines the device identity, verified ordering information, package details, same-family replacement candidates, and practical implementation guidance. It supports faster sourcing decisions while keeping the distinction clear between exact package-compatible options and newer devices that require redesign. The Request a Quote form on this page is the appropriate route for current commercial terms, lead time, and availability. Engineers should also consult the Spartan-3 DS099 family data sheet and the exact device ordering information before releasing a new PCB layout.

RFQ Kontak
XC3S400-4FG456I - 400K Gate Industrial Spartan-3 FPGA | AMD
XC3S400-4FG456I

XC3S400-4FG456I - 400K Gate Industrial Spartan-3 FPGA | AMD

AMD XC3S400-4FG456I is an industrial-grade Spartan-3 field-programmable gate array with 400,000 system gates, 8,064 logic cells, and 264 user I/Os, packaged in a 456-ball FBGA. It uses 90 nm fabrication technology, supports a 1.14 V to 1.26 V core supply, and is specified for an industrial junction-temperature range of -40°C to +100°C. The -4 speed designation identifies its performance grade, while the I suffix identifies the industrial temperature option. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic, flip-flops, memory blocks, and programmable I/O in one device. An FPGA belongs to the broader semiconductor and programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during development to implement control logic, interfaces, signal processing, and system functions without changing the printed circuit board. The Spartan-3 architecture provides substantial parallelism for cost-sensitive embedded systems. The XC3S400-4FG456I provides 400,000 system gates and 8,064 logic cells, allowing multiple datapaths, state machines, protocol engines, and control blocks to operate concurrently. Its 264 user I/Os support connections to external memory, converters, transceivers, and display or industrial peripherals. The 456-ball FBGA also provides a high pin count for designs requiring substantial parallel connectivity. Operating from a 1.14 V to 1.26 V core supply, the device is designed for low-voltage digital logic implementations. The 90 nm process generation balances programmable capacity with moderate system cost. This architecture is useful where fixed logic would be inflexible, where product variants require field updates, or where parallel hardware processing provides lower latency than a microcontroller-based software implementation. Typical applications include industrial control, telecommunications interface equipment, embedded video processing, instrumentation, data acquisition, and communication infrastructure. The 264 I/O count is particularly useful for parallel sensor acquisition and external bus interfaces, while the programmable logic can implement filters, protocol conversion, clocking, and real-time control functions. Existing Spartan-3 intellectual property can also support designs requiring established hardware interfaces. PCB design must address the fine-pitch BGA routing and power requirements carefully. Follow the Spartan-3 pinout, ball map, recommended decoupling, and PCB-layout guidance in the manufacturer datasheet. Confirm configuration pin states, clocking topology, bank supply requirements, and I/O standards before fabrication because these constraints determine whether a new board can be assembled and operated reliably. This page combines the manufacturer-family documentation with package, logic-capacity, I/O, temperature, application, and migration guidance. It also distinguishes verified same-package alternatives from broader FPGA upgrade paths that require board redesign, helping engineers assess replacement options without overlooking configuration, timing, and pin-compatibility constraints.

RFQ Kontak
XC3S400-4FGG320I - 400K Gate Spartan-3 FPGA | AMD | Industrial
XC3S400-4FGG320I

XC3S400-4FGG320I - 400K Gate Spartan-3 FPGA | AMD | Industrial

AMD XC3S400-4FGG320I is a Spartan-3 field-programmable gate array with 400,000 system gates, 294,912 logic cells, 221 user I/Os, and a 1.2 V core supply in a 320-pin fine-pitch ball grid array. The industrial-temperature designation supports equipment intended for operation from 0°C to 85°C. An FPGA is a programmable semiconductor in which digital logic, interfaces, and signal-processing functions are configured after manufacture. The Spartan-3 family occupies the FPGA hierarchy between fixed-function logic devices and larger programmable-logic arrays. Its configurable lookup tables, programmable interconnect, block RAM, dedicated multipliers, and user I/Os allow one board design to support multiple protocols, control sequences, or accelerator architectures. Key features include 400,000 system gates, 294,912 logic cells, 221 user I/Os, and a 1.2 V supply. The 320-BGA package provides dense board connectivity in a relatively small land pattern. The -4 speed designation identifies the device performance grade, while the industrial I suffix denotes the associated temperature range. The Spartan-3 architecture combines programmable logic with dedicated arithmetic resources. Its LUT-based logic fabric is suitable for control logic, interface bridging, packet processing, and parallel data pipelines. Dedicated block memory supports buffering, lookup tables, and data storage, while dedicated multiplier blocks accelerate multiply and accumulate operations. Configuration data determines the implemented circuit, allowing field updates without changing the PCB. Typical applications include industrial automation, embedded control, communications infrastructure, instrumentation, medical equipment, and compact digital signal-processing systems. The 221 available I/Os are useful for parallel sensor acquisition, external memory interfaces, serial transceivers, status indicators, and control signals. A clocking strategy and pin-constrained configuration file are essential for deterministic multi-clock designs. Power and signal integrity require careful PCB planning because a 320-BGA device has dense escape routing requirements. Decoupling capacitors should be placed directly beneath or near the supply and ground balls, and each power ball should be connected through short, low-inductance paths. Signal-integrity simulation should include package and board effects before high-speed interfaces are finalized. This page combines verified device characteristics, lifecycle information, same-package replacement options, comparison parameters, and practical implementation guidance. It also distinguishes a genuinely useful package-compatible replacement from larger Spartan-3 devices that require a different footprint and therefore cannot be soldered onto the original PCB land pattern.

RFQ Kontak
XC3S400-4FGG456I - 400K Spartan-3 FPGA | AMD
XC3S400-4FGG456I

XC3S400-4FGG456I - 400K Spartan-3 FPGA | AMD

AMD XC3S400-4FGG456I is a Spartan-3 field-programmable gate array with 400,000 system gates, 8,064 logic cells, and a maximum stated clock frequency of 630 MHz. The device is manufactured in 90 nm CMOS technology, operates from a 1.2 V core supply, and is offered in a surface-mount 456-pin FBGA package. It is intended for embedded systems requiring configurable parallel logic, digital control, data acquisition, communications, and programmable signal processing. An FPGA is a semiconductor device whose digital logic is configured after manufacture. The FPGA category belongs to the broader programmable-logic hierarchy, which includes complex programmable logic devices, field-programmable gate arrays, and programmable system chips. Unlike a fixed application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, memory resources, and input/output blocks within one package. This enables engineers to implement parallel architectures and revise hardware behavior through configuration rather than redesigning a custom silicon device. The Spartan-3 architecture provides 8,064 logic cells and approximately 400,000 system gates in this device. Its 264 I/O positions provide substantial connectivity for buses, sensors, displays, and external memory interfaces. The 630 MHz figure describes the device's stated clock capability rather than the performance of every implemented circuit. Actual design performance depends on clocking, routing congestion, logic depth, I/O standards, memory usage, and the selected tool version. The XC3S400-4FGG456I is identified with an industrial temperature designation, while the G suffix denotes a lead-free-related package option within Xilinx's ordering convention. Its 456-pin FBGA package supports high I/O density but requires careful escape routing, plane distribution, and thermal design. The 1.2 V core supply also requires a regulated power rail designed for the device's dynamic current demand. Typical uses include industrial controller boards, embedded instrumentation, motor and power-system control, test-and-measurement front ends, communications adapters, and general-purpose embedded prototyping. Its large I/O count is particularly useful when the design must connect parallel sensors, converters, memory devices, or legacy peripheral buses. A 630 MHz device clock provides substantial headroom for pipelined digital algorithms. Design the PCB around the manufacturer's power, decoupling, clock, and differential-pair guidance. Place bypass capacitors close to supply pins, provide a stable ground reference, and maintain the package's thermal-via and solder-mask requirements. Use conservative I/O standards unless the selected bank configuration and signal-integrity analysis confirm otherwise. This page combines the device's key FPGA specifications, lifecycle context, package-compatible alternatives, and practical implementation guidance. The alternative list focuses on devices that can preserve the 456-pin board footprint, while the design notes clarify the electrical and mechanical constraints that must still be reviewed before replacement.

RFQ Kontak