ATSAM4S-XSTK vs ATSAMHA1G16A-XPRO Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAM4S-XSTK sa pamamagitan ng Microchip Technology at ATSAMHA1G16A-XPRO sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ NakahandaMicrochip Technology
ATSAMHA1G16A-XPRO - SAM HA1G16A Xplained Pro MCU Eval Kit | Microchip
ATSAMHA1G16A-XPRO ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATSAM4S-XSTK | ATSAMHA1G16A-XPRO |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Development Boards | Development Boards |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Starter Kit (Evaluation Kit + Extension Boards) | Xplained Pro Evaluation Kit |
| On-board MCU | ATSAM4SD32C | — |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximum CPU Frequency | 120 MHz | — |
| Flash Memory | 2048 KB (2 MB) | — |
| SRAM | 160 KB | — |
| Low-frequency Crystal | 32.768 kHz (0.032768 MHz) | — |
| Operating Voltage Range (MCU) | 1.62 V to 3.6 V | — |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| ADC | 12-bit, up to 8 channels (per SAM4S family) | — |
| Communication Peripherals | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB | — |
| External Bus Interface | Yes (EBI), plus 16-bit SMC (Static Memory Controller) | — |
| On-board Debugger | EDBG (Embedded Debugger) over USB | EDBG (AT32UC3A3256-based) |
| Included Extension Boards | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro | — |
| Included Cables | 2x USB cables | — |
| Supported IDEs | Microchip Studio, Atmel Studio, GCC ARM toolchain | Microchip Studio (Atmel Studio), MPLAB X IDE, ASF / Harmony |
| Software Framework | Atmel Software Framework (ASF) / Harmony | — |
| Tindminan RoHS | Compliant | Compliant |
| Target MCU | — | ATSAMHA1G16A (SAM HA1G16A SiP) |
| Core Architecture | — | ARM Cortex-M0+ 32-bit |
| Target MCU Family | — | SAM HA1 (SiP, System-in-Package) |
| Debug Interface | — | Cortex-M0+ SWD via EDBG |
| Power Supply | — | USB-powered (EDBG USB) |
| Host Interface | — | USB Micro-B (EDBG) |
| Extension Headers | — | Xplained Pro EXT1/EXT2/EXT3; Arduino Uno R3-compatible |
| User I/O | — | LEDs, user buttons, reset button |
| Bootloader | — | Mass-storage drag-and-drop (target MCU) |
| Supported Extensions | — | I/O1 Xplained Pro, OLED1 Xplained Pro, QT2/QT4 Xplained Pro, PROTO1 Xplained Pro |
| Form Factor | — | Xplained Pro evaluation board |
| Uri ng Pagpapasok | — | Desktop / Bench (Arduino-shield-compatible) |