ATSAM4S-XSTK vs ATSAMHA1G16A-XPRO 比較
詳細並排比較 ATSAM4S-XSTK 由 Microchip Technology 與 ATSAMHA1G16A-XPRO 由 Microchip Technology. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ 啟用中Microchip Technology
ATSAMHA1G16A-XPRO - SAM HA1G16A Xplained Pro MCU Eval Kit | Microchip
ATSAMHA1G16A-XPRO ✓ 啟用中規格比較
| 參數 | ATSAM4S-XSTK | ATSAMHA1G16A-XPRO |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 類別 | Development Boards | Development Boards |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Starter Kit (Evaluation Kit + Extension Boards) | Xplained Pro Evaluation Kit |
| On-board MCU | ATSAM4SD32C | — |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximum CPU Frequency | 120 MHz | — |
| Flash Memory | 2048 KB (2 MB) | — |
| SRAM | 160 KB | — |
| Low-frequency Crystal | 32.768 kHz (0.032768 MHz) | — |
| Operating Voltage Range (MCU) | 1.62 V to 3.6 V | — |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| ADC | 12-bit, up to 8 channels (per SAM4S family) | — |
| Communication Peripherals | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB | — |
| External Bus Interface | Yes (EBI), plus 16-bit SMC (Static Memory Controller) | — |
| On-board Debugger | EDBG (Embedded Debugger) over USB | EDBG (AT32UC3A3256-based) |
| Included Extension Boards | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro | — |
| Included Cables | 2x USB cables | — |
| Supported IDEs | Microchip Studio, Atmel Studio, GCC ARM toolchain | Microchip Studio (Atmel Studio), MPLAB X IDE, ASF / Harmony |
| Software Framework | Atmel Software Framework (ASF) / Harmony | — |
| RoHS 狀態 | Compliant | Compliant |
| Target MCU | — | ATSAMHA1G16A (SAM HA1G16A SiP) |
| Core Architecture | — | ARM Cortex-M0+ 32-bit |
| Target MCU Family | — | SAM HA1 (SiP, System-in-Package) |
| Debug Interface | — | Cortex-M0+ SWD via EDBG |
| Power Supply | — | USB-powered (EDBG USB) |
| Host Interface | — | USB Micro-B (EDBG) |
| Extension Headers | — | Xplained Pro EXT1/EXT2/EXT3; Arduino Uno R3-compatible |
| User I/O | — | LEDs, user buttons, reset button |
| Bootloader | — | Mass-storage drag-and-drop (target MCU) |
| Supported Extensions | — | I/O1 Xplained Pro, OLED1 Xplained Pro, QT2/QT4 Xplained Pro, PROTO1 Xplained Pro |
| Form Factor | — | Xplained Pro evaluation board |
| 安裝類型 | — | Desktop / Bench (Arduino-shield-compatible) |