ATSAMA5D36-EK vs ATSAMA5D3-XPLD Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAMA5D36-EK sa pamamagitan ng Microchip Technology at ATSAMA5D3-XPLD sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAMA5D36-EK - SAMA5D36 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D36-EK ⚠ Huling PagbiliMicrochip Technology
ATSAMA5D3-XPLD - SAMA5D3 Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D3-XPLD ⚠ Huling PagbiliPagsanggunian na paghahambing
| Parametro | ATSAMA5D36-EK | ATSAMA5D3-XPLD |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Development Boards | Development Boards |
| Katayuan ng Lifecycle | Huling Pagbili | Huling Pagbili |
| Product Type | Evaluation Board / Development Kit | Embedded Evaluation Board (Xplained Kit) |
| Supported MPU | Atmel SAMA5D36 (ARM Cortex-A5) | — |
| CPU Core | ARM Cortex-A5 with FPU | — |
| Maximum CPU Frequency | 536 MHz | — |
| On-chip Cache | 32 KB I-cache + 32 KB D-cache | — |
| Internal SRAM | 128 KB | — |
| External DRAM | 512 MB DDR2 / LPDDR | — |
| EEPROM | 64 KB | — |
| NAND Flash | 4 MB | — |
| NOR Flash | 16 MB | — |
| SPI DataFlash | 256 MB | — |
| Ethernet | MII / RMII (dual capable) | 2x 10/100/1000 GMAC |
| USB | USB Host + USB Device ports | 1x USB 2.0 Device, 2x USB 2.0 Host |
| Display Interface | TFT LCD connector | — |
| Camera Interface | CMOS camera connector | — |
| Boot / Programming | SAM-BA bootloader + JTAG | — |
| Supported Software | SAMA5D3 Softpack, Linux, Qt demos | — |
| Target Series | SAMA5D3 (SAMA5D31/D33/D34/D36) | — |
| Tindminan RoHS | Compliant | — |
| Target MPU | — | ATSAMA5D36 (ARM Cortex-A5) |
| Core | — | ARM Cortex-A5 with FPU |
| Maximum CPU Clock | — | 536 MHz |
| On-chip SRAM | — | 128 KB |
| Cache (I/D) | — | 32 KB each |
| External Memory Interface | — | DDR2 / LPDDR / LPDDR2 + NAND Flash + QSPI |
| Graphics Output | — | HDMI + parallel LCD |
| CAN | — | 2x CAN 2.0B |
| Storage | — | microSD slot + NAND Flash on-board |
| Expansion Headers | — | Arduino R3 + Xplained extension header |
| Debug Interface | — | On-board J-Link-OB (JTAG + SWD) + serial console |
| Operating System Support | — | Linux Mainline, Yocto Project, bare-metal C examples |
| Included Accessories | — | micro-AB to Type-A USB cable |
| Temperature na Operasyon | — | 0C to +70C (commercial evaluation use) |
| Compliance | — | RoHS Compliant |