CP2101 vs CP2102N-A01-GQFN28R Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng CP2101 sa pamamagitan ng Silicon Labs at CP2102N-A01-GQFN28R sa pamamagitan ng Silicon Labs. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ NakahandaPagsanggunian na paghahambing
| Parametro | CP2101 | CP2102N-A01-GQFN28R |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Huling Pagbili | Aktibo |
| Fungsi | USB to UART Bridge Controller | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| Integrated Transceiver | Yes | — |
| Integrated Oscillator | Yes (internal) | — |
| Integrated EEPROM | Yes (programmable) | — |
| Integrated Voltage Regulator | 5 V to 3 V, up to 100 mA | — |
| UART Data Rate | 300 bps to 921.6 kbps | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI (full) | — |
| Operating Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Regulated Output | 3.0 V to 3.6 V (3.3 V typical) | — |
| Packhaging | MLP/QFN-28 (5 x 5 mm) | 28-QFN (5x5 mm) with exposed pad |
| Driver Support | Windows, macOS, Linux (virtual COM port) | — |
| Configuration | USB bus-powered or self-powered | — |
| Temperature na Operasyon | [DATA_NEEDED: operating temperature] | -40 C to +85 C |
| Tindminan RoHS | Compliant | Compliant |
| Bus-Powered Capable | Yes | — |
| Product Type | — | USB to UART Bridge Controller |
| Series | — | USBXpress |
| UART Interface | — | USB 2.0 UART |
| Number of UART Channels | — | 1 |
| Rate ng Data | — | 300 baud to 1 Mbaud |
| Supply Voltage (VBUS) | — | 4.0 V to 5.25 V |
| Supply Voltage (VDD) | — | 3.0 V to 3.6 V |
| Internal Regulator Output | — | 3.3 V (up to ~100 mA) |
| Uri ng Pagpapasok | — | Surface Mount |
| GPIO | — | Yes (multiple, signal-configurable) |
| Reset Pin | — | RSTb (active-low hardware reset) |
| On-chip Oscillator | — | Yes (no external crystal required) |
| Level ng MSL | — | MSL3 (per JEDEC J-STD-020) |
| Host Driver | — | Silicon Labs CP210x VCP driver |