CY7C65213-28PVXI vs CP2102N-A02-GQFN28 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng CY7C65213-28PVXI sa pamamagitan ng Infineon at CP2102N-A02-GQFN28 sa pamamagitan ng Silicon Labs. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ NakahandaSilicon Labs
CP2102N-A02-GQFN28 USB-to-UART Bridge, QFN28 | Silicon Labs
CP2102N-A02-GQFN28 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | CY7C65213-28PVXI | CP2102N-A02-GQFN28 |
|---|---|---|
| Brand | Infineon | Silicon Labs |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Katayuan ng Stock | — | In Stock |
| Presyo ng Yunit (USD) | — | $2.35 |
| Product Type | USB-to-UART Bridge Controller | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | — |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | 48 MHz (no external crystal required) |
| GPIO Pins | Available (multi-function) | — |
| Packhaging | 28-pin SSOP | QFN-28 (5x5 mm) |
| Operating Voltage | 5.0 V (VBUS-powered) | — |
| Hanay ng Temperature na Operasyon | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Tindminan RoHS | Compliant | Compliant |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| Fungsi | — | USB 2.0 to UART Bridge Controller |
| Protocol | — | USB 2.0 Full-Speed |
| Supply Voltage (VDD) | — | 3 V to 3.6 V |
| I/O Voltage (VIO) | — | 1.8 V to VDD |
| Maximum Baud Rate | — | 3 Mbaud |
| USB Speed | — | Full-Speed (12 Mbps) |
| Digital I/O Pins | — | 7 |
| Internal Regulator Output | — | 3.3 V |
| Internal Regulator Current | — | Up to 100 mA (external load) |
| ROM for Descriptors | — | 960 bytes (one-time programmable) |
| UART Data Bits | — | 5, 6, 7, or 8 (programmable) |
| Hardware Flow Control | — | RTS/CTS supported |
| Temperature na Operasyon | — | -40C to +85C |