DRV8434ARGER vs DRV8434ERGER Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng DRV8434ARGER sa pamamagitan ng Texas Instruments at DRV8434ERGER sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI
DRV8434ARGER ✓ NakahandaTexas Instruments
DRV8434ERGER - 48V 2.5A Dual H-Bridge Motor Driver | Texas Instruments
DRV8434ERGER ✓ NakahandaPagsanggunian na paghahambing
| Parametro | DRV8434ARGER | DRV8434ERGER |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Motor Drivers | Motor Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Motor Type | Bipolar stepper | Bipolar stepper or dual brushed DC |
| Number of H-Bridges | 2 | 2 |
| Output Kumpigurasyon | NMOS H-bridge | — |
| Supply Voltage (VM) | 4.5 V to 48 V | — |
| Full-Scale Output Current | 2.5 A per phase (peak) | — |
| RMS Output Current | 1.5 A per phase (typical) | — |
| Microstepping Resolution | Full-step to 1/256 step | — |
| Current Sensing | Integrated (no external sense resistor) | — |
| Stall Detection | Yes (GPIO output) | — |
| Decay Mode | Smart Tune (mixed decay) | — |
| Control Interface | Step/Direction + SPI | STEP/DIR + M0/M1 |
| Sleep Pin | Yes (nSLEEP, active low) | — |
| Fault Pin | Yes (nFAULT, active low, open-drain) | — |
| Protection Features | UVLO, OCP, OVP, OTP, open load, stall | UVLO, OCP, short-circuit, open load, thermal shutdown, charge pump fault |
| Temperature na Operasyon | -40 C to +125 C | -40 C to +125 C |
| Packhaging | VQFN-24 (RGE) 4x4 mm with thermal pad | VQFN-24 (RGE) 4x4 mm with exposed thermal pad |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | 2 (1 year floor life) | [DATA_NEEDED: MSL rating] |
| Tindminan RoHS | Compliant | Compliant |
| Supply Voltage na Operasyon | — | 4.5 V to 48 V |
| Continuous Output Current (per H-bridge) | — | 2.5 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) (HS + LS per bridge) | — | [DATA_NEEDED: RDS(on) value] |
| Integrated Current Sense | — | Yes (internal sense-FET, no external shunt) |
| Microstepping Indexer | — | Full-step to 1/256 native |
| Decay Modes | — | Smart Tune, Slow, Mixed, Fast (selectable) |
| Sleep Mode Pin | — | Yes (nSLEEP) |
| Fault Output | — | Yes (nFAULT, open-drain) |