EPC2LC20 vs EPC1LI20 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng EPC2LC20 sa pamamagitan ng Altera at EPC1LI20 sa pamamagitan ng Altera. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | EPC2LC20 | EPC1LI20 |
|---|---|---|
| Brand | Altera | Altera |
| Kategorya | Memory ICs | Memory ICs |
| Katayuan ng Lifecycle | NRND | Obsolete |
| Uri ng Memory | Non-volatile configuration PROM | OTP Configuration PROM (EPROM-based) |
| Laki ng Memory | 1.6 Mbit | 1 Mb (1,048,576 bits) |
| Configuration Interface | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE | Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1) |
| Programming Interface | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant | — |
| Supply Voltage VCC | 3.0 V to 3.6 V (3.3-V operation) | — |
| ISP Voltage Range | 5.0 V or 3.3 V | — |
| Supported FPGA Families | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 | — |
| Cascade Support | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams | — |
| Packhaging | 20-pin PLCC (J-lead, 9x9 mm) | 20-pin PLCC (J-lead, 9x9 mm) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount (PLCC socket compatible) |
| Temperature na Operasyon | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] | [DATA_NEEDED: operating temperature range] |
| Tindminan RoHS | Non-Compliant (original Altera Pb-containing part) | [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish] |
| Lead-Free Version | EPC2LC20N available as lead-free equivalent | — |
| Programming Support | Altera Programming Unit (APU), Quartus II, JTAG programmer | — |
| Boundary-Scan | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG | — |
| Maximum Configuration Clock | — | 8 MHz |
| Supply Voltage (VCC) | — | 5.0 V (4.75 V to 5.25 V) |
| Programming Voltage (VPP) | — | 12.75 V (typical, factory-programmed via JTAG) |
| Bilang ng Pin | — | 20 |
| Cascading Support | — | Yes (nCASC pin for multi-device daisy chain) |
| Endurance | — | OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase) |
| JTAG Programming | — | Yes (in-system via IEEE 1149.1) |
| Compatible FPGA Families | — | FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury |
| Level ng MSL | — | 1 (per Partstack datasheet record) |