INA114AP vs INA114BU Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng INA114AP sa pamamagitan ng Texas Instruments at INA114BU sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ NakahandaPagsanggunian na paghahambing
| Parametro | INA114AP | INA114BU |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Voltage Drift | 0.25 µV/°C | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/√Hz |
| Maximum Input Bias Current | 2 nA | — |
| Minimum Common-Mode Rejection | 115 dB | — |
| Input Overvoltage Protection | ±40 V | — |
| Supply Voltage Range | ±18 V | 2.25 V to 18 V |
| Maximum Quiescent Current | 3 mA | — |
| Hanay ng Temperature na Operasyon | -40°C to +85°C | -40°C to +85°C |
| Packhaging | 8-pin PDIP | 16-pin SOIC |
| Uri ng Pagpapasok | Through-hole | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp design |
| Long-Term Stability | Specified as excellent long-term stability | — |
| Compliance | RoHS and REACH status not stated | — |
| Input Offset Voltage | — | 50 uV |
| Typical Supply Current | — | 3 mA |
| Gain Range | — | 1 to 10,000 |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Slew Rate | — | 0.06 V/µs |
| Settling Time | — | 600 ns |
| Product Type | — | Low-cost, general-purpose precision instrumentation amplifier |
| Tindminan RoHS | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |