INA114AP vs INA114BU Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA114AP tarafından Texas Instruments ve INA114BU tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ AktifÖzellik Karşılaştırması
| Parametre | INA114AP | INA114BU |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Voltage Drift | 0.25 µV/°C | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/√Hz |
| Maximum Input Bias Current | 2 nA | — |
| Minimum Common-Mode Rejection | 115 dB | — |
| Input Overvoltage Protection | ±40 V | — |
| Supply Voltage Range | ±18 V | 2.25 V to 18 V |
| Maximum Quiescent Current | 3 mA | — |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | -40°C to +85°C |
| Paket | 8-pin PDIP | 16-pin SOIC |
| Montaj Türü | Through-hole | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp design |
| Long-Term Stability | Specified as excellent long-term stability | — |
| Compliance | RoHS and REACH status not stated | — |
| Input Offset Voltage | — | 50 uV |
| Typical Supply Current | — | 3 mA |
| Gain Range | — | 1 to 10,000 |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Slew Rate | — | 0.06 V/µs |
| Settling Time | — | 600 ns |
| Product Type | — | Low-cost, general-purpose precision instrumentation amplifier |
| RoHS Durumu | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |