INA114AP vs INA114BU 비교
다음의 상세 나란히 비교: INA114AP 제조: Texas Instruments 및 INA114BU 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ 활성사양 비교
| 파라미터 | INA114AP | INA114BU |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Voltage Drift | 0.25 µV/°C | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/√Hz |
| Maximum Input Bias Current | 2 nA | — |
| Minimum Common-Mode Rejection | 115 dB | — |
| Input Overvoltage Protection | ±40 V | — |
| Supply Voltage Range | ±18 V | 2.25 V to 18 V |
| Maximum Quiescent Current | 3 mA | — |
| 동작 온도 범위 | -40°C to +85°C | -40°C to +85°C |
| 패키지 | 8-pin PDIP | 16-pin SOIC |
| 실장 유형 | Through-hole | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp design |
| Long-Term Stability | Specified as excellent long-term stability | — |
| Compliance | RoHS and REACH status not stated | — |
| Input Offset Voltage | — | 50 uV |
| Typical Supply Current | — | 3 mA |
| Gain Range | — | 1 to 10,000 |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Slew Rate | — | 0.06 V/µs |
| Settling Time | — | 600 ns |
| Product Type | — | Low-cost, general-purpose precision instrumentation amplifier |
| RoHS 상태 | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |