INA125PA vs INA122PA Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng INA125PA sa pamamagitan ng Texas Instruments at INA122PA sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
INA125PA - 10V Reference Bridge Amplifier | Texas Instruments
INA125PA ✓ NakahandaTexas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ NakahandaPagsanggunian na paghahambing
| Parametro | INA125PA | INA122PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Single-channel instrumentation amplifier with precision voltage reference | — |
| Amplifier Count | 1 circuit | — |
| Gain Range | 4 to 10,000 | 5 V/V to 10,000 V/V |
| Gain Configuration | Single external resistor | — |
| Internal Reference Voltage | 10 V | — |
| Supply Voltage Range | 1.35 V to 18 V | — |
| Kuru-kuryente ng Kapayapaan | 460 µA | 60 uA |
| Offset Voltage | 250 µV maximum | — |
| Offset Voltage Drift | 2 µV/°C maximum | — |
| Bandwidth | 150 kHz | — |
| Gain Error | 0.02% | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Hanay ng Output Volte | [DATA_NEEDED: output voltage range] | — |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Packhaging | 16-pin PDIP | 8-pin PDIP (P) |
| Uri ng Pagpapasok | Through-hole | Through-hole |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation amplifier, two-op-amp design |
| Number of Channels | — | 1 |
| Supply Voltage Range (Single Supply) | — | 2.2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | +/-18 V |
| Input Offset Voltage (max) | — | 250 uV |
| Input Offset Drift (max) | — | 3 uV/degC |
| Gain Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | (V-) - 0.1 V |
| Output Swing | — | Rail-to-rail |
| Supply Type | — | Single or dual supply operation |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Slew Rate | — | [DATA_NEEDED: slew rate specification] |