INA125PA vs INA122PA 비교
다음의 상세 나란히 비교: INA125PA 제조: Texas Instruments 및 INA122PA 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ 활성사양 비교
| 파라미터 | INA125PA | INA122PA |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Single-channel instrumentation amplifier with precision voltage reference | — |
| Amplifier Count | 1 circuit | — |
| Gain Range | 4 to 10,000 | 5 V/V to 10,000 V/V |
| Gain Configuration | Single external resistor | — |
| Internal Reference Voltage | 10 V | — |
| Supply Voltage Range | 1.35 V to 18 V | — |
| 대기 전류 | 460 µA | 60 uA |
| Offset Voltage | 250 µV maximum | — |
| Offset Voltage Drift | 2 µV/°C maximum | — |
| Bandwidth | 150 kHz | — |
| Gain Error | 0.02% | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| 출력 전압 범위 | [DATA_NEEDED: output voltage range] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 패키지 | 16-pin PDIP | 8-pin PDIP (P) |
| 실장 유형 | Through-hole | Through-hole |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation amplifier, two-op-amp design |
| Number of Channels | — | 1 |
| Supply Voltage Range (Single Supply) | — | 2.2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | +/-18 V |
| Input Offset Voltage (max) | — | 250 uV |
| Input Offset Drift (max) | — | 3 uV/degC |
| Gain Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | (V-) - 0.1 V |
| Output Swing | — | Rail-to-rail |
| Supply Type | — | Single or dual supply operation |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Slew Rate | — | [DATA_NEEDED: slew rate specification] |