INA125PA vs INA122PA 对比
详细并排对比 INA125PA 出自 Texas Instruments 和 INA122PA 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ 量产中规格对比
| 参数 | INA125PA | INA122PA |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | Single-channel instrumentation amplifier with precision voltage reference | — |
| Amplifier Count | 1 circuit | — |
| Gain Range | 4 to 10,000 | 5 V/V to 10,000 V/V |
| Gain Configuration | Single external resistor | — |
| Internal Reference Voltage | 10 V | — |
| Supply Voltage Range | 1.35 V to 18 V | — |
| 静态电流 | 460 µA | 60 uA |
| Offset Voltage | 250 µV maximum | — |
| Offset Voltage Drift | 2 µV/°C maximum | — |
| Bandwidth | 150 kHz | — |
| Gain Error | 0.02% | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| 输出电压范围 | [DATA_NEEDED: output voltage range] | — |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 封装 | 16-pin PDIP | 8-pin PDIP (P) |
| 安装类型 | Through-hole | Through-hole |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation amplifier, two-op-amp design |
| Number of Channels | — | 1 |
| Supply Voltage Range (Single Supply) | — | 2.2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | +/-18 V |
| Input Offset Voltage (max) | — | 250 uV |
| Input Offset Drift (max) | — | 3 uV/degC |
| Gain Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | (V-) - 0.1 V |
| Output Swing | — | Rail-to-rail |
| Supply Type | — | Single or dual supply operation |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Slew Rate | — | [DATA_NEEDED: slew rate specification] |