ISO1450BDWR vs ADM2484EBRWZ Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ISO1450BDWR sa pamamagitan ng Texas Instruments at ADM2484EBRWZ sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ Nakahanda
Pagsanggunian na paghahambing
| Parametro | ISO1450BDWR | ADM2484EBRWZ |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Kategorya | Interface ICs | RS-485/RS-422 |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Presyo ng Yunit (USD) | — | $3.10 |
| Fungsi | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | Half/Full |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | — |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| Thermal Shutdown | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Temperature na Operasyon | -40C to +125C | -40°C to +85°C |
| Packhaging | SOIC-16 wide-body (DW), 16 pins | 16-SOIC (0.295", 7.50mm Width) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | 3 (per JEDEC J-STD-020) | — |
| Tindminan RoHS | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Type | — | Isolated RS-485/RS-422 Transceiver |
| Number of Channels | — | 3 |
| Isolation Voltage | — | 5000 Vrms |
| Rate ng Data | — | 500 kbps |
| CMTI | — | 25 kV/µs |
| ESD Protection | — | ±15 kV |
| Supply Voltage (Logic) | — | 3.3 V or 5 V |
| Supply Voltage (Bus) | — | 5 V |
| Number of Drivers/Receivers | — | 1/1 |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |