MPX4115A117 vs MPX4115AS Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MPX4115A117 sa pamamagitan ng NXP Semiconductors at MPX4115AS sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MPX4115AS - 15-115kPa Absolute Pressure Sensor | NXP Semiconductors
MPX4115AS ObsoletePagsanggunian na paghahambing
| Parametro | MPX4115A117 | MPX4115AS |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Pressure Sensors | Pressure Sensors |
| Katayuan ng Lifecycle | Aktibo | Obsolete |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Type ng Output | Analog, Ratiometric Voltage | Analog Voltage |
| Hanay ng Output Volte | 0.2 V to 4.8 V | 0.2 V to 4.8 V |
| Volte ng Pagbibigay | 4.85 V to 5.35 V (5 V typ) | 4.85 V to 5.35 V (5.1 V nominal) |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical quiescent current] |
| Accuracy | ±1.5% over 0°C to 85°C | — |
| Temperature na Operasyon | -40 °C to +125 °C | -40C to +125C |
| Response Time | 1.0 ms (typical) | — |
| Packhaging / Kaso | 6-SIP Module (Case 867-08) | — |
| Port Type | Single axial port, top side | — |
| Uri ng Pagpapasok | Through-Hole | Through Hole |
| Media Compatibility | Dry air, non-corrosive gases | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film network | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Bilang ng Pin | 6 | — |
| Sensitivity | — | 45.9 mV/kPa (nominal at 5.1 V supply) |
| Port Style | — | Male - 0.19 inch (4.93 mm) Tube |
| Package Type | — | 6-SIP Module (through-hole) |
| Body Length/Diameter | — | 17.9 mm |
| On-Chip Signal Conditioning | — | Yes (bipolar op-amp) |
| Temperature Compensation | — | Yes (on-chip) |
| Factory Calibration | — | Yes (laser-trimmed) |