SN65HVD234DR vs SN65HVD230QDRQ1 Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng SN65HVD234DR sa pamamagitan ng Texas Instruments at SN65HVD230QDRQ1 sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Texas Instruments
SN65HVD234DR SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments

SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments

SN65HVD234DR ✓ Nakahanda
Texas Instruments
SN65HVD230QDRQ1 SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments

SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments

SN65HVD230QDRQ1 ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro SN65HVD234DR SN65HVD230QDRQ1
Brand Texas Instruments Texas Instruments
Kategorya Interface ICs Interface ICs
Katayuan ng Lifecycle Aktibo Aktibo
Presyo ng Yunit (USD) $1.30 $1.11
Product Type CAN Bus Transceiver —
Protocol ISO 11898-1 CAN 2.0A/B —
Supply Voltage (VCC) 3.0 V to 3.6 V —
Logic Supply Voltage (VIO) Not required (3.3V logic) —
Maximum Signaling Rate 1 Mbps —
Number of Drivers/Receivers 1/1 —
Bus Fault Protection +/-36 V —
ESD Protection (Bus Pins, HBM) >16 kV —
Common-Mode Input Range +/-12 V (extended) —
Maximum Nodes Supported 120 —
I/O Logic Level LVTTL, 5V-tolerant —
Sleep Mode Supply Current 0.05 uA (typical) —
Standby Mode Supply Current 370 uA (typical) —
Hanay ng Temperature na Operasyon -40C to +125C -40C to +125C
Packhaging SOIC-8 (D) 8-SOIC (D), 3.90 mm width
Uri ng Pagpapasok Surface Mount Surface Mount
Tindminan RoHS Compliant —
Modes of Operation (RS Pin) High-speed, Slope Control, Low-power Standby —
Dominant Time-Out Protection Yes —
Thermal Shutdown Yes —
Transceiver Type — CAN (Half-duplex, 1 driver / 1 receiver)
Rate ng Data — Up to 1 Mbps
Volte ng Pagbibigay — 3.3 V
Standby Mode Current — 370 uA (typical)
Bus Pin ESD Protection — Exceeds 15 kV HBM
Device ESD Rating — Exceeds 2000 V per MIL-STD-883
Protocol Compatibility — ISO 11898-2 High Speed CAN Physical Layer
Standby Mode — Yes (RS pin controlled)
Dominant Timeout — Yes
Slew Rate Control — Yes (RS pin)
Unpowered Node Behavior — Does not disturb the bus
AEC-Q100 Qualification — Qualified (Automotive Catalog)
Packaging — Tape & Reel (DR)

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita