10CX085YU484I5G - Cyclone 10 GX FPGA 85K LE | Intel | FPGA
MPN: 10CX085YU484I5G ✓ Nakahanda10CX085YU484I5G Ulas
A Cyclone 10 GX FPGA belongs to Intel's mid-range FPGA family — specifically the low-power, transceiver-equipped tier optimized for industrial, video, and connectivity use cases. Within the broader product hierarchy, it sits below the Arria 10 and Stratix 10 families: Cyclone 10 → low-power FPGA family → FPGA → programmable logic device → semiconductor IC. Its design tool is the Quartus Prime Lite/Standard/Pro software suite.
Key features include 85K logic elements, 156 (18x18) multipliers, embedded memory of 5,959,680 bits, four 12.5 Gbps transceivers, two PCI Express Gen2 hard IP blocks, and hard memory controllers. Industrial temperature grade (-40 °C to +100 °C) makes it suitable for harsh environments. The 484-pin UBGA package combines high pin count with a compact 19 mm × 19 mm footprint suitable for mid-complexity designs.
Architecturally, the device uses a 20 nm TSMC process with a fabric composed of Adaptive Logic Modules (ALMs), M20K embedded memory blocks, variable-precision DSP blocks, and a hardened periphery containing transceivers, PLLs, and PCIe Gen2 controllers. Hardening these functions reduces logic consumption and improves timing closure compared to soft implementations.
Typical applications include industrial machine vision, broadcast video processing, motor control, smart-grid terminals, and PCI Express endpoint cards in embedded systems. The combination of low power, transceivers, and PCIe Gen2 hard IP enables single-chip solutions where previous designs required a discrete ASSP plus an FPGA.
When designing with the 10CX085YU484I5G, pay attention to transceiver channel placement (only available on specific banks), power-supply sequencing of the core and transceiver rails, and the requirement for a JTAG configuration interface during development. Quartus Prime must be selected for the GX family.
This page synthesizes distributor pricing, same-package pin-compatible OPN alternatives within the Cyclone 10 GX family, and practical design notes not consolidated in the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na 10CX085YU484I5G — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok 10CX085YU484I5G (parehas na form factor at footprint) — pagkakaiba sa Package, Embedded Memory, Operating Temperature, Process Technology, Logic Elements (LE).
10CX085YU484E5G
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →10CX085YU484E6G
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →10CX085YU484I6G
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →10CX085YU484I5G Mga Pinakamataas na Rating at Electrical Characteristics
| Family | Cyclone 10 GX |
| Logic Elements | 85,000 |
| Embedded Memory | 5,959,680 bits |
| Number of LABs/CLBs | 10,640 |
| User I/O Count | 188 |
| Number of Transceivers | 4 (up to 12.5 Gbps) |
| PCI Express Hard IP | 2 × Gen2 |
| DSP Multipliers (18x18) | 156 |
| Process Technology | 20 nm |
| Operating Temperature Grade | Industrial (-40C to +100C) |
| Package Type | 484-pin UBGA (Ultra-fine BGA) |
| Supply Voltage - Core | 0.9 V (typical) |
| Uri ng Pagpapasok | Surface Mount (BGA) |
| Configuration Interface | JTAG / Active Serial / Fast Passive Parallel |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng 10CX085YU484I5G 484-pin ubga (ultra-fine bga)
Pin configuration para sa 10CX085YU484I5G (484-pin ubga (ultra-fine bga) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa 10CX085YU484I5G.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
10CX085YU484I5G ay nararapat para sa 6 aplikasyons: Industrial Machine Vision, PCI Express Endpoint Card, Broadcast Video Processing, Motor Control and Industrial Drive, Smart Grid Terminal / Substation Equipment, Software-Defined Radio Front-End.
Industrial Machine Vision
The 10CX085YU484I5G suits industrial machine-vision pipelines thanks to its 85K logic elements and 156 (18x18) multipliers for image pre-processing. Its 5,959,680 bits of embedded memory buffer full-HD frames line-by-line without external SRAM. Industrial temperature grade (-40C to +100C) and 188 user I/O support MIPI/parallel camera interfaces plus GPIO for trigger and lighting. Unlike larger Cyclone 10 GX parts, the 85K LE density fits small form-factor vision modules where BOM cost matters.
Inirekomenda
PCI Express Endpoint Card
Two hardened PCI Express Gen2 IP blocks make the 10CX085YU484I5G a compact PCIe Gen2 endpoint. The hard IP removes the soft-logic overhead of a PCIe controller, freeing fabric for application logic, while 4 transceivers (12.5 Gbps) support x1/x2/x4 Gen2 lane configurations. The 484-pin UBGA exposes enough I/O for downstream peripherals and DDR3/DDR4 external memory interfaces, and Quartus Prime provides a verified PCIe Gen2 reference design for fast bring-up.
Inirekomenda
Broadcast Video Processing
The 10CX085YU484I5G handles SDI/HDMI bridging, color-space conversion, and frame-rate conversion in broadcast video systems. Its 156 (18x18) DSP blocks implement real-time chroma-keying and scaling filters without external DSP chips. Transceivers accept 3G-SDI inputs at 2.97 Gbps and 12G-SDI at higher rates via multi-link aggregation. Hard memory controllers interface to DDR3 external memory used as line/frame buffers, and the 188 user I/O provide GPIO for control panels and tally outputs.
Inirekomenda
Motor Control and Industrial Drive
The 10CX085YU484I5G integrates DSP-heavy motor-control algorithms (FOC, space-vector PWM, encoder decoding) within 85K logic elements, eliminating a separate DSP MCU. Hardened PLLs generate precise switching frequencies, and 188 user I/O support multi-axis PWM outputs, quadrature encoder inputs, and resolver excitation. The industrial temperature grade allows operation inside sealed drive enclosures where ambient can exceed 85C. Transceivers link the controller to higher-level EtherCAT or SERCOS networks.
Inirekomenda
Smart Grid Terminal / Substation Equipment
Substation terminals require deterministic real-time processing for protection, metering, and IEC 61850 communication — the 10CX085YU484I5G covers all three within 85K logic elements. Transceivers carry Ethernet-based IEC 61850 GOOSE/SV messages, while user I/O interface to CT/PT sensors, trip relays, and HMI displays. Industrial temperature grade and the 484-pin UBGA's robust mechanical structure suit substation racks. Hard memory controllers buffer sampled values without soft-logic complexity.
Inirekomenda
Software-Defined Radio Front-End
Software-defined radio front-ends benefit from the 10CX085YU484I5G's combination of 4 transceivers (up to 12.5 Gbps), 156 DSP multipliers, and 5,959,680 bits of embedded memory for sample buffering. The transceiver channels interface directly to ADC/DAC pairs, while the DSP fabric implements DDC/DUC, channelization, and pulse-shaping filters. Industrial temperature grade supports outdoor base-station and tactical radio installations, and 188 user I/O provide control links to RF front-end tuning elements.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for 10CX085YU484I5G — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | 10CX085YU484E5G | 10CX085YU484E6G | 10CX085YU484I6G |
|---|---|---|---|---|
| Package | UBGA-484 (U484) | UBGA-484 (U484) - same | UBGA-484 (U484) - same | UBGA-484 (U484) - same |
| Brand | Intel | Intel - same | Intel - same | Intel - same |
| Logic Elements | 85,000 | 85,000 - same | 85,000 - same | 85,000 - same |
| Embedded Memory (bits) | 5,959,680 | 5,959,680 - same | 5,959,680 - same | 5,959,680 - same |
| User I/O | 188 | 188 - same | 188 - same | 188 - same |
| Transceivers (12.5 Gbps) | 4 | 4 - same | 4 - same | 4 - same |
| Temperature Grade | Industrial (-40C to +100C) | Extended | Extended | Industrial |
| Speed Grade | 5 | 5 - same | 6 (slower) | 6 (slower) |
| PCIe Gen2 Hard IP Blocks | 2 | 2 - same | 2 - same | 2 - same |
| DSP Multipliers (18x18) | 156 | 156 - same | 156 - same | 156 - same |
Pangunahing mga Pagkakaiba
- Same-package alternative with extended temperature grade (kumpara sa10CX085YU484E5G)
- Same-package alternative with slower speed grade for cost reduction (kumpara sa10CX085YU484E6G)
- Hardened 12.5 Gbps transceivers eliminate soft SERDES fabric usage (kumpara sa10CX085YU484I6G (industrial speed grade 6))
Talaan ng Disenyo
The 10CX085YU484I5G requires multiple supply rails: 0.9 V core (VCC), 1.1 V/1.2 V transceiver analog supplies (VCCL_GXB/VCCR_GXB), and per-bank VCCIO for I/O. According to the manufacturer datasheet, the power-on sequence must satisfy core-before-I/O ordering — failure to do so can cause long-term reliability degradation. Use a sequencer or simple RC network on PGOOD rails to ensure correct startup.
The 484-pin UBGA requires microvia PCB technology (laser-drilled stacked vias) on at least 4-layer stack-ups. Decoupling capacitors must be placed directly under the package on the bottom side using via-in-pad if routing density requires. According to Intel's Cyclone 10 GX PCB design guidelines, a continuous ground plane on the layer directly below the BGA is mandatory for transceiver signal integrity.
Transceiver channels are placed on dedicated GXB banks at fixed locations in the UBGA-484 footprint — pin assignments are NOT arbitrary. According to the Intel pin-out file, only specific pins route to the transceiver PHY, and mixing them with user I/O can break compilation. Use the Quartus Prime pin planner early in the schematic stage to lock down transceiver pin assignments before PCB layout begins.
Estimated: configuration mode selection (AS, Fast Passive Parallel, JTAG) is committed at board design by MSEL pin strapping — reconfiguring in the field requires board rework. Also, JTAG access is required for initial debug; do not omit the JTAG header on prototypes even if production uses Active Serial. The 'I5G' suffix in the OPN denotes industrial temperature grade and speed grade 5; changing to 'E6G' for cost savings is a drop-in but reduces speed.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliant per Intel Cyclone 10 GX product family documentation. Halogen-free status [DATA_NEEDED: confirm against Intel MDDS]. AEC-Q100 not applicable - FPGAs are not AEC-Q100 qualified in the Cyclone 10 GX family.
