A54SX32A-2FGG256 - 48K-Gate FPGA 256-FBGA | Microchip
MPN: A54SX32A-2FGG256 ✓ NakahandaA54SX32A-2FGG256 Ulas
An antifuse FPGA is a type of field-programmable gate array whose interconnects are permanently programmed at power-up of the configuration step rather than stored in SRAM. Unlike SRAM-based FPGAs, antifuse devices are non-volatile, require no external configuration ROM, and are inherently resistant to configuration upset, making them a member of the broader programmable logic and power/cost-sensitive ASIC- replacement hierarchy. The SX-A family targets designers who need one-time-programmable logic integration at ASIC-like unit cost.
Key features of the A54SX32A-2FGG256 include 48K system gates (approximately 1,800 logic cells on a 0.25 um antifuse process per FindIC data), 203 available user I/Os in the 256-FBGA package, a -2 speed grade for mid-to-high-speed glueless integration, and RoHS3-compliant surface-mount assembly. Distributed routing and dedicated clock resources support synchronous designs without external glue logic.
Technically, the SX-A architecture uses a sea-of-modules fabric with combinational and sequential modules connected by a program-once antifuse interconnect matrix. Because configuration is hard-wired, there is no configuration readback path, which supports designs where bitstream security matters. The 0.25 um process yields predictable timing, and the -2 grade represents the standard commercial speed bin for this family.
Typical applications include industrial control and automation glue logic, telecommunications line-card interface bridging, defense and avionics legacy-design sustainment, and ASIC prototype or low-volume production integration where a single-chip solution replaces multiple discrete logic devices.
Design consideration: as a one-time-programmable device, functional changes require new silicon, so lock down the design and verify timing with Microchip Libero/Designer software before committing to programming; the commercial 0C to +70C rating also excludes most automotive and extended-temperature industrial deployments.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving buyers and engineers a single verified reference point.
Mga alternatibo na pwedeng ilagay na A54SX32A-2FGG256 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok A54SX32A-2FGG256 (parehas na form factor at footprint) — pagkakaiba sa Package, System Gates, Operating Temperature, RoHS Status, Family.
A54SX32A-2FGG256I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A54SX32A-1FGG256M
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A54SX32A-1FGG256
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A54SX32A-1FGG256I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A54SX32A-FGG256A
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A54SX32A-2FGG256 Mga Pinakamataas na Rating at Electrical Characteristics
| Family | SX-A (antifuse FPGA) |
| System Gates | 48000 |
| Logic Cells | 1800 |
| User I/O | 203 |
| Speed Grade | -2 |
| Maximum Toggle Rate | 238 MHz |
| Process Technology | 0.25 um |
| Volte ng Pagbibigay | 2.25 V to 5.25 V |
| Temperature na Operasyon | 0C to +70C (TA) |
| Packhaging | 256-FBGA (17x17 mm) |
| Uri ng Pagpapasok | Surface Mount |
| Programmability | One-Time Programmable (antifuse) |
| Packaging | Tray |
| Tindminan RoHS | ROHS3 Compliant |
| Manufacturer Lead Time | 10 weeks |
| Product Status | Active |
Gabay sa Pin Configuration ng A54SX32A-2FGG256 256-fbga (17x17 mm)
Pin configuration para sa A54SX32A-2FGG256 (256-fbga (17x17 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa A54SX32A-2FGG256.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
A54SX32A-2FGG256 ay nararapat para sa 6 aplikasyons: Industrial Control and Automation Glue Logic, Telecommunications Line-Card Interface Bridging, Defense and Avionics Legacy Design Sustainment, ASIC Prototyping and Low-Volume Integration, Test and Measurement Instrument Logic, Secure Single-Chip System Integration.
Industrial Control and Automation Glue Logic
The A54SX32A-2FGG256 consolidates address decoding, bus interfacing, state machines, and I/O expansion that would otherwise occupy multiple 74-series devices, using its 48,000 system gates and 203 user I/Os in a single 17x17 mm 256-FBGA. Its instant-on antifuse configuration means factory equipment starts with deterministic logic state at power application, with no configuration delay - a meaningful advantage for safety interlocks and machine sequencing. The 2.25V to 5.25V supply span eases interfacing with legacy 5V and 3.3V industrial I/O standards. Because the design is one-time-programmable, engineers should complete static timing closure at the -2 grade in Microchip Designer before releasing production fusemaps, then standardize on a single qualified programming source to guarantee device-to-device consistency across the installed base.
Inirekomenda
Telecommunications Line-Card Interface Bridging
In telecom line cards, the A54SX32A-2FGG256 bridges backplane interfaces, handles framing logic, and manages board-level control signals. The -2 speed grade supports toggle rates up to approximately 238 MHz, sufficient for T1/E1-class framing and backplane glue functions, while the 256-FBGA's 203 user I/Os accommodate wide parallel data paths to PHY and framer devices. Its antifuse fabric introduces no configuration-readback path, supporting carrier equipment security requirements, and the non-volatile fabric means cards resume operation immediately on hot-swap or reboot. Designers should budget board area for the 17x17 mm BGA land pattern with standard via-in-pad or dog-bone escape routing, and verify I/O bank voltage compatibility (2.25V to 5.25V per distributor data) against neighboring transceiver devices to avoid level-shifting circuits.
Inirekomenda
Defense and Avionics Legacy Design Sustainment
The SX-A antifuse family is a staple of defense and avionics obsolescence-management programs, and the A54SX32A-2FGG256 sustains platforms originally designed around Actel/Microsemi SX-A silicon. Antifuse one-time programming resists configuration upsets and offers no readback path, matching platform security reviews, while Microchip's continued active status (verified 2026-09-03, 10-week lead time) supports long-duration program lifecycles. The 48K-gate capacity accommodates MIL-STD-1553-style protocol wrappers, bus arbitration, and sensor-interface glue functions typical of these retrofits. Procurement teams should qualify extended-temperature or screened ordering variants where ambient conditions exceed the commercial 0C to +70C rating, and should dual-source ordering suffixes within the same 256-FBGA footprint to hedge allocation risk across the 10-week factory lead time.
Inirekomenda
ASIC Prototyping and Low-Volume Integration
Before committing an ASIC tape-out, teams use FPGAs to validate RTL, and the A54SX32A-2FGG256's 48K gates cover small ASIC blocks such as controllers, converters, and protocol engines. Although SRAM FPGAs dominate iterative prototyping, the SX-A is attractive at the transition to low-volume production: the same validated design can be frozen into one-time-programmable antifuse silicon at unit costs well below SRAM FPGA pricing, integrating multiple functions into a single low-cost chip as Microchip's product page describes. The -2 grade's roughly 238 MHz toggle capability covers moderate clock domains. The critical workflow consideration is that silicon cannot be reprogrammed - lock the RTL, complete timing sign-off in Microchip Designer, and validate on an SRAM platform first so every programmed A54SX32A-2FGG256 device ships with fully verified logic.
Inirekomenda
Test and Measurement Instrument Logic
Bench and automated test instruments use the A54SX32A-2FGG256 for trigger logic, counter/timer functions, scan chains, and bus interfacing to GPIB, USB-bridge, or PXI backplane controllers. Instant-on antifuse configuration eliminates the several-hundred-millisecond configuration latency of SRAM FPGAs, which matters for instruments expected to be measurement-ready at power-on, and the absence of a configuration device improves long-term reliability in rack equipment. The 203 user I/Os in the 256-FBGA support dense parallel connections to ADC front ends and relay matrices. Since commercial temperature rating is 0C to +70C, laboratory instruments are an ideal fit, while portable field instruments exposed to outdoor temperatures should specify the industrial I-suffix variant in the identical footprint for qualification simplicity.
Inirekomenda
Secure Single-Chip System Integration
Where a system must integrate control, sequencing, and interface logic into one programmable device with strong configuration confidentiality, the A54SX32A-2FGG256 offers a compelling profile: its programmed antifuses cannot be read back, so reverse engineering the fusemap requires destructive delayering and microscopy. Microchip positions SX-A for combining performance, security, and low power in single-chip solutions, replacing multi-chip glue-logic clusters and their supply-chain exposure. With 48K gates and 203 I/Os, typical secure-integration loads include secure-boot supervisory logic, tamper-response sequencing, and encrypted-bus bridging. The trade-off versus SRAM devices is permanence: any post-deployment functional change requires new programmed silicon, so secure designs should reserve spare I/O and include field-diagnostic state machines in the first-pass fusemap.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for A54SX32A-2FGG256 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | A54SX32A-2FGG256I | A54SX32A-1FGG256M | A54SX32A-1FGG256 | A54SX32A-FGG256A |
|---|---|---|---|---|---|
| Package | 256-FBGA (17x17 mm) | 256-FBGA (17x17 mm) - same | 256-FBGA (17x17 mm) - same | 256-FBGA (17x17 mm) - same | 256-FBGA (17x17 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 48000 | 48000 | 48000 | 48000 | 48000 |
| User I/O | 203 | 203 | 203 | 203 | 203 |
| Programmability | One-Time Programmable (antifuse) | One-Time Programmable (antifuse) | One-Time Programmable (antifuse) | One-Time Programmable (antifuse) | One-Time Programmable (antifuse) |
| Lifecycle Status | Active | Active | Active (listed on DigiKey) | Active | Active |
Pangunahing mga Pagkakaiba
- Fastest commercial speed grade in the 256-FBGA SX-A family (kumpara saA54SX32A-1FGG256M)
- Extended-temperature drop-in available without board change (kumpara saA54SX32A-2FGG256I)
- Non-volatile antifuse fabric eliminates configuration memory (kumpara saSRAM-based competitor FPGAs (e.g., Lattice/Intel equivalents))
Talaan ng Disenyo
The SX-A family spans a 2.25V to 5.25V supply range per distributor listings, but the 256-FBGA organizes I/O into banks whose voltage must match the interfaced logic family. Confirm per-bank VCCI requirements in the SX-A family datasheet (sxa_ds.pdf) before routing, and decouple each supply ball with at least 0.1 uF ceramic capacitance placed within 2 mm of the ball. Antifuse FPGAs draw no configuration current at power-up, so supply sequencing constraints are milder than SRAM FPGAs, but core current scales with toggle rate - simulate worst-case activity factors in Microchip Designer's power estimator.
The 256-FBGA (17x17 mm) uses a fine ball pitch requiring either dog-bone escape or via-in-pad routing on at least a 4-layer board with dedicated ground plane for signal return. The package is supplied in trays with a 10-week manufacturer lead time, so plan assembly schedules around factory lead time, not distributor stock alone. Follow the land pattern in the datasheet package mechanicals section exactly; BGA rework of antifuse parts is costly because each device is one-time-programmable and a damaged unit cannot be reprogrammed - it must be scrapped.
The most common SX-A mistake is treating the part like an SRAM FPGA: there is no field update path, so any functional change means physically swapping programmed silicon. Lock RTL and complete static timing analysis against the -2 speed grade library in Microchip Designer before submitting devices for programming, and archive the fusemap file with revision control. Also verify temperature grade: the standard -2 commercial part is rated 0C to +70C; deployments outside that window must switch to the I-suffix industrial variant, which is a drop-in on the same board.
Impormasyon ng Pagsunod sa Kautusan
ROHS3 Compliant per Microchip USA product listing (verified 2026-09-03). REACH, halogen-free, lead-free and conflict-minerals declarations not stated in provided data and must be confirmed with Microchip compliance documentation.
