Analog Devices

AD526BD - 16x SPGA, 1-16x Gain | Analog Devices | Instrumentation

MPN: AD526BD ✓ Nakahanda
16-CDIP Package
MOQ: 1 |

AD526BD Ulas

The Analog Devices AD526BD is a single-ended, monolithic software-programmable gain amplifier with digitally selectable gains of 1, 2, 4, 8, and 16, housed in a 16-lead ceramic DIP package. The complete amplifier requires no external gain-setting resistors and includes a resistor network with TTL-compatible latched control inputs. Its maximum gain of 16 makes it suitable for precision instrumentation, sensor conditioning, data acquisition, and industrial measurement systems that need calibrated signal amplification with a compact analog front end.

A software-programmable gain amplifier, or SPGA, is a gain-control IC that combines an amplifier with a digitally selectable resistive network. In the signal-chain hierarchy, the AD526BD belongs to the amplifier IC family and specifically to the programmable-gain-amplifier category used ahead of converters, meters, and data-acquisition systems. The latched digital interface allows a processor or controller to select gain while preserving a stable analog operating point during measurement.

The AD526 family provides binary gains from 1 through 16 and supports a two-chip cascade mode that extends the available binary gain range to 256. According to the Analog Devices AD526 data sheet, maximum gain error is 0.01% for the C-grade device and 0.02% for the A-grade device, while gain drift over temperature is specified at 0.5 ppm/°C. These characteristics make gain programming useful when one analog input path must accommodate signals with widely different amplitudes.

The AD526BD combines its amplifier, internal resistor network, and TTL-compatible latched inputs in one monolithic device. That integration removes the need for external matched gain resistors and reduces circuit area. TTL-compatible control inputs also simplify interfacing with conventional digital logic, although the system designer must still observe the required input timing, supply sequencing, and grounding practices specified in the manufacturer data sheet.

Typical applications include bridge-transducer signal conditioning, laboratory measurement front ends, programmable test equipment, industrial process monitoring, and multichannel data-acquisition systems. In a bridge or sensor interface, the selected gain can normalize a small sensor output before it reaches an ADC. The AD526BD can also serve as the first gain stage in a cascaded architecture, where two devices provide higher overall gain while retaining the same family architecture.

A key design consideration is signal settling after a gain-code change. Allow sufficient acquisition time for the amplifier and external anti-alias network to settle before sampling the converted signal. Keep sensitive analog traces short, place input and output bypass components close to the device, and use a clean ground reference to minimize errors that could otherwise appear as measurement gain errors rather than as noise from the source.

This product page combines the AD526 family architecture, gain-programming behavior, application guidance, and drop-in candidate analysis. It also provides practical selection criteria for engineers deciding between package, grade, temperature-range, and gain-configuration options for precision analog signal chains.

Mga alternatibo na pwedeng ilagay na AD526BD — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD526BD (parehas na form factor at footprint) — pagkakaiba sa Package, External Components Required, Operating Temperature Range, Supply Voltage Range.

Analog Devices
Package: 16-lead ceramic DIP (16-CDIP)
External Components Required: None
Operating Temperature Range: -55°C to +125°C
Ikabit sa AD526BD →
Analog Devices
External Components Required: 0 components
Operating Temperature Range: -40°C to +85°C
Supply Voltage Range: ±4.5 V to ±16.5 V
Ikabit sa AD526BD →

AD526BDZ

✅ Drop-In
Analog Devices
📦 16-CDIP
Software-programmable gain amplifier · 1 circuit · Single-ended monolithic SPGA · 1, 2, 4, 8, and 16 · 4 MHz · 24 V/µs · 50 pA · 250 µV

Magkontak para sa presyo

Tingnan ang Datasheet →

AD526ADZ

✅ Drop-In
Analog Devices
📦 16-CDIP
Single-ended monolithic software-programmable gain amplifier · 1 circuit · 1, 2, 4, 8, and 16 · 350 kHz · ±4.5 V to ±16 V · ±4.5 V · ±16 V · -55°C to +125°C

Magkontak para sa presyo

Tingnan ang Datasheet →

AD526BD Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Single-ended monolithic software-programmable gain amplifier
Number of Channels 1 circuit
Programmable Gain 1, 2, 4, 8, or 16
Maximum Programmable Gain 16 V/V
Two-Chip Cascade Maximum Gain 256 V/V
Gain Error, C Grade 0.01% max
Gain Error, A Grade 0.02% max
Gain Drift Over Temperature 0.5 ppm/°C
Control Input Compatibility TTL-compatible latched inputs
External Gain-Setting Components 0 components
Internal Resistor Network Included
Signal Polarity Single-ended
Packhaging 16-CDIP
Lead Count 16 leads
Uri ng Pagpapasok Through-hole

Gabay sa Pin Configuration ng AD526BD 16-cdip

Pin configuration para sa AD526BD (16-cdip package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 16-cdip package para sa AD526BD

Wala ng detalyadong pinout data na magagamit para sa AD526BD.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD526BD ay nararapat para sa 6 aplikasyons: Precision Sensor Signal Conditioning, Industrial Process Measurement, Laboratory Data Acquisition, Programmable Test and Measurement, Two-Chip High-Gain Cascade, Bridge Transducer Amplifier.

🏭

Precision Sensor Signal Conditioning

The AD526BD fits low-level sensor front ends because it offers 1, 2, 4, 8, and 16 gain settings while eliminating external gain-setting resistors. Position it between a transducer or bridge output and an ADC to normalize signals of different amplitudes into a usable converter range. Its integrated resistor network simplifies board layout, and the specified C-grade gain error of 0.01% maximum supports accurate measurements. When the source amplitude changes, update the latched gain code and allow the amplifier to settle before sampling. Check the AD526 input range, common-mode limits, bandwidth, and noise requirements against the particular sensor output.

⚡

Industrial Process Measurement

The AD526BD is useful in industrial process-monitoring systems where pressure, temperature, or flow sensors produce signals over a wide amplitude range. Its binary gains from 1 through 16 let one analog channel accommodate several input ranges without replacing external precision resistors. The 16-CDIP through-hole format also supports prototyping and repairable instrumentation assemblies. Keep the gain code stable during a measurement to avoid including switching transients in the sampled result. Validate the device against the sensor excitation scheme, industrial noise environment, and required measurement bandwidth before production release.

📺

Laboratory Data Acquisition

The AD526BD fits laboratory data-acquisition front ends that need repeatable gain selection under digital control. With gains of 1, 2, 4, 8, and 16, it can attenuate larger channels relative to smaller ones while preserving one common amplifier topology. Its monolithic construction includes the amplifier and resistor network, reducing board space and avoiding external resistor matching. Use the latched inputs to command gain from a controller, then apply a settling delay before enabling the ADC conversion. The stated 0.01% maximum C-grade gain error and 0.5 ppm/°C drift provide useful starting points for uncertainty analysis.

🔧

Programmable Test and Measurement

The AD526BD can normalize varied input amplitudes in programmable test equipment because its gain code can be changed under logic control. A single board design may therefore cover several signal ranges without changing analog hardware. The 1-to-16 gain choices are especially useful when the source amplitude is known to vary by powers of two. For automated measurements, coordinate gain-code updates with acquisition timing so the amplifier reaches its new operating point before conversion. Confirm settling time and usable bandwidth in the Analog Devices data sheet for the required gain code and signal shape.

📡

Two-Chip High-Gain Cascade

The AD526BD can participate in a two-chip cascade that extends the AD526 family's binary gain range to 256. This arrangement suits very small sensor outputs that cannot be brought into an ADC's useful range with one amplifier stage. The stages should be connected according to the AD526 manufacturer's cascade circuit, with attention to interstage loading, bandwidth, offset, and stability. As each gain code changes, both stages may require additional settling before the final sample is valid. Use the family data sheet as the authoritative basis for component values and signal-path layout.

📱

Bridge Transducer Amplifier

The AD526BD is appropriate for bridge-transducer conditioning when the bridge output requires programmable amplification before digitization. Its binary gain choices allow a controller to compensate for different mechanical ranges, load conditions, or excitation levels while retaining a fixed analog gain network. The integrated resistor network avoids the need to match external precision gain components, and the 16-CDIP package simplifies through-hole assembly. Maintain a low-impedance reference return and follow the data sheet's input and ground recommendations. Verify that the selected gain preserves the bridge signal's common-mode range and bandwidth.

What is the AD526BD?
The AD526BD is a single-ended, monolithic software-programmable gain amplifier with selectable gains of 1, 2, 4, 8, and 16. According to the Analog Devices AD526 data sheet, the device integrates the amplifier, resistor network, and TTL-compatible latched inputs, so it requires no external gain-setting components. It is packaged in a 16-CDIP and is intended for instrumentation and precision signal-conditioning systems.
What gains are available on the AD526BD?
The AD526BD provides binary gains of 1, 2, 4, 8, and 16. The Analog Devices AD526 data sheet also identifies a two-chip cascade mode that extends the binary gain range to 256. This makes one amplifier suitable for moderate signal scaling and two cascaded devices suitable for low-level sensor outputs requiring higher overall amplification.
Where can I download the AD526BD datasheet PDF?
The official AD526BD documentation is available through the Analog Devices AD526 product page and the AD526 manufacturer data sheet linked on this page. The data sheet describes the 1-, 2-, 4-, 8-, and 16-gain modes, the integrated resistor network, TTL-compatible latched inputs, gain-error grades, and the two-chip cascade capability.
What is the AD526BD pinout?
The AD526BD uses a 16-lead ceramic DIP configuration, but the numerical pin names and functions must be taken from the manufacturer pin-description table before PCB routing. Use the Analog Devices AD526 data sheet as the authoritative source for each lead, including supply, ground, analog input, analog output, and latched gain-control connections.
What are the key specifications of AD526BD that engineers should know?
The AD526BD combines a single-ended amplifier, internal resistor network, and TTL-compatible latched gain controls in a 16-CDIP. Selectable gain is 1, 2, 4, 8, or 16, with a two-chip cascade reaching 256. The Analog Devices AD526 data sheet specifies maximum gain error of 0.01% for the C grade and 0.02% for the A grade, plus 0.5 ppm/°C gain drift.
What is the difference between AD526BD and AD526BDZ?
The AD526BD and AD526BDZ belong to the same AD526 software-programmable gain amplifier family and share the core 1-to-16 gain architecture. Their exact ordering-code differences must be checked against the manufacturer package and grade markings before substitution. Confirm the 16-lead package, temperature range, grade, and lead arrangement in the AD526 data sheet before approving either part for production.
What can replace the AD526BD?
The closest documented candidates are Analog Devices AD526 family order codes such as AD526BDZ and AD526ADZ, but a drop-in replacement must retain the same 16-CDIP footprint, pin arrangement, gain codes, electrical limits, and temperature grade. Use the AD526 manufacturer data sheet to verify each ordering code. No cross-brand drop-in replacement was established by the available cross-reference results.
Is AD526BD the same as AD526ADZ?
The AD526BD and AD526ADZ implement the same fundamental AD526 architecture with 1, 2, 4, 8, and 16 gain settings and integrated latched control inputs. They are not automatically interchangeable because ordering suffixes can identify different grades, temperature ranges, or package configurations. Confirm the CDIP lead count and exact suffix definitions in the manufacturer documentation.
When should I choose AD526BD over an alternative SPGA?
Choose the AD526BD when a design needs a single-ended amplifier with five binary gain settings, integrated gain-setting resistors, and a 16-CDIP footprint. Its 1-to-16 gain range covers many sensor and measurement inputs without external resistor networks. Select another option when a smaller surface-mount package, wider gain range, different supply range, or manufacturer-specific qualification is essential.
Is AD526BD suitable for sensor instrumentation?
The AD526BD is suitable for sensor instrumentation because it offers programmable gains from 1 to 16 and requires no external gain-setting components. A bridge, thermocouple, or low-level transducer signal can be amplified before conversion when its amplitude is within the amplifier's input and common-mode limits. Verify those electrical limits and the sensor excitation requirements in the AD526 data sheet.
How accurate is the AD526BD gain?
The Analog Devices AD526 data sheet specifies maximum gain error of 0.01% for the C grade and 0.02% for the A grade, with gain drift over temperature of 0.5 ppm/°C. Actual system accuracy also depends on resistor tolerances, reference accuracy, ADC performance, noise, temperature, and calibration method, so these amplifier figures should not be treated as the complete measurement uncertainty.
What power and thermal considerations apply to AD526BD?
The AD526BD requires correct supply bypassing and adequate thermal headroom for its dissipation, which depends on supply voltage, output voltage, and load current. Use the supply-current, output-current, and maximum junction-temperature limits in the Analog Devices AD526 data sheet. Place bypass capacitors close to the device and provide suitable through-hole copper paths for heat dissipation.
Is the AD526BD compliant with RoHS and REACH?
The RoHS and REACH status of the exact AD526BD ordering code must be confirmed from the current Analog Devices product or material-declaration documentation. The AD526 manufacturer data sheet establishes the device's gain, package, and functional characteristics but does not by itself establish current material-compliance declarations. Request the applicable declaration before treating the part as compliant.
Where can I buy AD526BD and check its lead time?
Use the Request a Quote form on this page to request AD526BD pricing, current availability, minimum order quantity, and production lead time. The part is listed in a 16-CDIP package, but a distributor listing does not guarantee current stock or delivery timing. The quotation response should confirm the exact suffix, package, quantity, and shipment location.
What is the price of AD526BD?
The current AD526BD quotation is handled through the Request a Quote form on this page. The structured product record retains a historical unit-price reference, but engineers should request a fresh quotation for production planning because component pricing, stock, and lead time can change. Confirm the exact 16-CDIP ordering code and required quantity with the supplier.
How do I design a two-chip cascade with AD526BD devices?
A two-chip AD526 cascade can extend the family's binary gain range to 256, according to the Analog Devices AD526 data sheet. Connect the stages according to the manufacturer's cascade guidance and account for bandwidth, loading, stability, settling time, and offset in the complete signal path. The data sheet's cascade circuit should be used as the starting point for PCB implementation.

Impormasyon ng Talumpati sa Engineering for AD526BD — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose AD526BD for a through-hole, single-ended instrumentation design that needs binary gains of 1, 2, 4, 8, and 16 with integrated gain-setting resistors and TTL-compatible latched control inputs. Its C-grade specification provides a maximum gain error of 0.01%. Consider AD526BDZ when its exact grade or ordering-code characteristics better match the required temperature range or qualification, after checking the manufacturer package marking and pinout. Consider AD526ADZ when the A-grade 0.02% maximum gain error is adequate and its ordering-code coverage is preferable. A surface-mount SPGA may be more appropriate when board area, automated assembly, supply range, or gain beyond 16 is the dominant requirement. Before approving any substitute, verify the 16-CDIP footprint, pin names, supply limits, bandwidth, settling time, common-mode range, and temperature grade against the AD526 data sheet.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD526BDZ AD526ADZ
Brand Analog Devices Analog Devices Analog Devices
Package 16-CDIP 16-CDIP 16-CDIP
Product Type Software-programmable gain amplifier Software-programmable gain amplifier Software-programmable gain amplifier
Programmable Gain 1, 2, 4, 8, or 16 1, 2, 4, 8, or 16 1, 2, 4, 8, or 16
Maximum Single-Chip Gain 16 16 16
Two-Chip Cascade Gain 256 256 256
Gain Drift Over Temperature 0.5 ppm/°C 0.5 ppm/°C 0.5 ppm/°C
Control Interface TTL-compatible latched inputs TTL-compatible latched inputs TTL-compatible latched inputs
External Gain-Setting Components 0 components 0 components 0 components

Pangunahing mga Pagkakaiba

  • Higher specified gain accuracy than the A-grade family option (kumpara saAD526ADZ)
  • Complete integrated gain network (kumpara saAD526ADZ)
  • High-gain cascade capability (kumpara saAD526BDZ)

Talaan ng Disenyo

Treat a gain-code transition as an acquisition boundary. Latch the new binary gain setting, allow the AD526BD and any downstream anti-alias filter to settle, and then initiate the ADC conversion. Sampling too early can make a gain transition appear as a signal excursion. Use the manufacturer settling-time data for the selected gain and signal bandwidth rather than assuming the previous conversion interval is sufficient.

Place the required bypass and compensation components close to their associated AD526BD pins, and route the analog input and output with minimal loop area. For the 16-CDIP implementation, provide adequate through-hole spacing and avoid routing high-current digital or switching-supply traces beneath the analog path. A clean ground connection is especially important because resistor-network gain accuracy alone does not remove errors caused by ground gradients or common-mode coupling.

Calculate the amplifier's approximate dissipation from the actual supply, output, quiescent current, and load-current conditions, then compare the resulting junction-temperature estimate with the limits in the AD526 data sheet. Use the formula P = (VIN - VOUT) × ILOAD plus device-specific internal losses. This calculation is an engineering estimate rather than a manufacturer maximum and must be checked against worst-case supply, load, and ambient temperature.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance declarations for the exact AD526BD ordering code were not established by the listed manufacturer and distributor sources. Confirm current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification documentation with Analog Devices before production release.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD526BD datasheet AD526BD datasheet pdf AD526BD pinout AD526BD 16-CDIP AD526BD programmable gain amplifier AD526BD gain range AD526BD application circuit AD526BD equivalent AD526BD replacement AD526BD vs AD526ADZ AD526BD vs AD526BDZ AD526BD price AD526BD stock Analog Devices AD526BD

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD526BD AD526BDZ AD526ADZ AD526 software-programmable gain amplifier SPGA programmable gain amplifier amplifier IC analog signal conditioning monolithic amplifier internal resistor network TTL-compatible latched inputs binary programmable gain 1-to-16 gain two-chip cascade 16-CDIP ceramic dual in-line package through-hole package gain error gain temperature drift sensor instrumentation bridge transducer data acquisition industrial process measurement
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ