AD7472YRU - 12-Bit 1.5 MSPS ADC | Analog Devices
MPN: AD7472YRU ✓ NakahandaAD7472YRU Ulas
An ADC is a data-acquisition IC that converts an analog voltage into a digital code. The AD7472 belongs to the parallel-output SAR ADC family, combining a 12-bit resolution, 1.5 MSPS sampling capability, and low 4 mW power operation in a single package. The AD7470 is the related 10-bit member of the family, while AD7472 provides the higher resolution needed when the input-to-output quantization step must be smaller.
Key characteristics include 12-bit resolution, 1.5 MSPS maximum throughput, a 2.7 V to 5.25 V analog supply range, and a low-noise internal reference. The parallel interface presents the conversion result across dedicated digital output pins, allowing direct connection to a microcontroller, FPGA, DSP, or logic device without requiring a serial data link.
The successive-approximation architecture performs one conversion through a sequence of internal comparator decisions. Its throughput is suitable for industrial process monitoring, sensor acquisition, portable measurement equipment, and embedded control loops. Because the interface is parallel, the host processor must be able to accept and latch 12 bits of conversion data within the available acquisition interval.
A typical implementation places the AD7472 close to the analog input source and routes its digital outputs to a logic device. Short analog traces reduce pickup of noise and switching artifacts, while a solid ground plane and careful separation of analog and digital return currents help preserve conversion accuracy. The manufacturer datasheet should be consulted for the complete pin-description table, recommended input and reference circuits, and acquisition timing diagrams.
The AD7472YRU is suited to designers who require a parallel-output SAR converter with a compact 24-pin TSSOP footprint. AD7472ARU and AD7472BRU provide related temperature-grade choices, while the AD7470 members trade resolution for higher throughput. This page also organizes pricing evidence, replacement guidance, comparison parameters, and practical design notes for faster component selection.
Mga alternatibo na pwedeng ilagay na AD7472YRU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AD7472YRU (parehas na form factor at footprint) — pagkakaiba sa Package, Input Type, Number of Channels, Resolution, Architecture.
AD7472ARUZ-REEL
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →AD7472BRU-REEL
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD7470ARU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD7470BRU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD7472YRU Mga Pinakamataas na Rating at Electrical Characteristics
| ADC Type | Successive-approximation ADC |
| Pangangasiwaan | 12 bit |
| Number of Channels | 1 channel |
| Input Type | Single-ended analog input |
| Rate ng Pagkupita | 1.5 MSPS |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Power Consumption | 4 mW |
| Output Interface | Parallel |
| Packhaging | 24-pin TSSOP |
| Package Type | TSSOP-24 |
| Uri ng Pagpapasok | Surface Mount |
| Reference | Internal low-noise reference |
Gabay sa Pin Configuration ng AD7472YRU tssop-24
Pin configuration para sa AD7472YRU (tssop-24 package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD7472YRU.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD7472YRU ay nararapat para sa 6 aplikasyons: Industrial Sensor Acquisition, Precision Data-Acquisition Systems, Embedded Control and Monitoring, Portable Measurement Instruments, Audio and Vibration Monitoring, FPGA-Based Signal Processing.
Industrial Sensor Acquisition
The AD7472YRU is suitable for acquiring conditioned pressure, temperature, or position signals in industrial measurement systems. Its 12-bit resolution provides a finer digital representation than the 10-bit AD7470 family, while the 1.5 MSPS rate supports moderately fast process-control updates. Place the converter near the sensor interface to keep the analog input trace short, then latch the parallel outputs in an FPGA or microcontroller. The single 2.7 V to 5.25 V supply range supports both 3.3 V and 5 V designs, reducing the number of rails required around the acquisition chain.
Inirekomenda
Precision Data-Acquisition Systems
The 12-bit resolution and 1.5 MSPS throughput of the AD7472YRU fit compact precision DAQ modules that digitize several slow or medium-speed analog channels through multiplexing. Its parallel output allows the host processor to capture each code with a straightforward digital interface, avoiding the serial overhead of a serial-output converter. The 24-pin TSSOP package also supports dense board layouts, although a dedicated ground plane and short analog routing remain important for preserving measurement quality.
Inirekomenda
Embedded Control and Monitoring
The AD7472YRU can serve as the analog front end of an embedded controller that monitors a condition, pressure, or analog process variable and updates a control loop. Its 1.5 MSPS maximum rate is sufficient for many feedback and monitoring tasks, while 12-bit quantization gives the controller more useful information about small input changes. Connect its parallel outputs to the host MCU or DSP and use the acquisition timing from the manufacturer datasheet to establish the conversion and data-latch interval.
Inirekomenda
Portable Measurement Instruments
The low 4 mW power operation and 2.7 V to 5.25 V supply range of the AD7472YRU suit battery-powered handheld measurement equipment. A 3.3 V implementation can reduce both supply complexity and converter power demand compared with a higher-voltage analog rail, while the parallel outputs can be handled by a low-power embedded controller. Low power does not remove the need for careful reference grounding and analog layout, so the input network and bypass components should remain close to the device.
Inirekomenda
Audio and Vibration Monitoring
The AD7472YRU can be used for low-frequency vibration, acoustic, or waveform monitoring where the 12-bit resolution improves visibility of small signal changes and the 1.5 MSPS rate captures the required bandwidth. Place the converter at the output of a low-noise amplifier and anti-alias filter, and route the parallel output to an FPGA timing engine. The application must account for the 10-bit AD7470's higher 1.75 MSPS rate when sampling requirements prioritize maximum speed over output resolution.
Inirekomenda
FPGA-Based Signal Processing
The parallel data bus of the AD7472YRU maps naturally onto an FPGA acquisition pipeline, allowing the conversion code to be captured, filtered, or integrated without a serial interface. The 12-bit output and 1.5 MSPS throughput support continuous moderate-rate sampling, while the 24-pin TSSOP package allows placement near the analog front end. Designers should time the latch event from the acquisition sequence in the manufacturer datasheet and keep digital output routing away from the sensitive analog input and reference paths.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD7472YRU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD7472ARU | AD7472BRU | AD7470ARU | AD7470BRU |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | TSSOP-24 | TSSOP-24 | TSSOP-24 | TSSOP-24 | TSSOP-24 |
| Resolution | 12 bit | 12 bit | 12 bit | 10 bit | 10 bit |
| Sampling Rate | 1.5 MSPS | 1.5 MSPS | 1.5 MSPS | 1.75 MSPS | 1.75 MSPS |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| ADC Architecture | Successive approximation | Successive approximation | Successive approximation | Successive approximation | Successive approximation |
| Number of Channels | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Output Interface | Parallel | Parallel | Parallel | Parallel | Parallel |
| Temperature Grade | Y suffix ordering grade | A suffix ordering grade | B suffix ordering grade | A suffix ordering grade | B suffix ordering grade |
Pangunahing mga Pagkakaiba
- Higher conversion resolution within the same family (kumpara saAD7470ARU)
- Same-footprint temperature-grade flexibility (kumpara saAD7472BRU)
- Resolution prioritized over maximum throughput (kumpara saAD7470BRU)
Talaan ng Disenyo
Route the analog input directly from the sensing or conditioning circuit to the AD7472YRU input pin, and keep the digital output traces away from that path. A continuous ground plane under the analog section helps establish a low-impedance return. Place supply-bypass and reference components close to their associated pins, following the layout and component values shown in the Analog Devices data sheet.
Capture each conversion using the conversion-complete timing and acquisition interval defined in the manufacturer data sheet. Because the AD7472YRU uses a parallel interface, the receiving FPGA or MCU must meet the setup and hold requirements at the indicated sampling edge. Avoid deriving an equivalent timing sequence solely from the 1.5 MSPS headline rate.
Do not treat an AD7470 device as an exact AD7472YRU replacement. The AD7470 family operates at up to 1.75 MSPS but provides only 10-bit resolution, whereas the AD7472 provides 12 bits at up to 1.5 MSPS. A substitution may also require firmware rescaling and verification of the full-scale code range before it is approved for production.
Design the analog and digital supplies around the 2.7 V to 5.25 V operating range. Bypass each supply connection at the device with the capacitance and placement recommended in the manufacturer data sheet, and keep switching-regulator loops and their high-current paths away from the analog input and reference network.
Impormasyon ng Pagsunod sa Kautusan
The available product information identifies the AD7472 family as a low-power ADC but does not provide explicit RoHS, REACH, halogen-free, or conflict-minerals declarations. AEC-Q100 status is marked not applicable because the part is not identified as an automotive-qualified device.