Texas Instruments

ADS1286UC - 12-Bit 20 kHz Micro-Power ADC | Texas Instruments

MPN: ADS1286UC ✓ Nakahanda
4.5 V to 5.25 V Vdss 250 uA Id 8-pin SOIC Package
MOQ: 1 |

ADS1286UC Ulas

Texas Instruments ADS1286UC is a 12-bit, 20 kHz successive-approximation analog-to-digital converter with one differential input, an integrated sample-and-hold amplifier, and an 8-pin SOIC package. The converter operates from a 4.5 V to 5.25 V analog supply and consumes 250 uA of supply current, making it suitable for compact, low-power measurement systems.

An analog-to-digital converter, or ADC, converts an analog voltage into a numeric code for processing, measurement, logging, or control. Within the semiconductor hierarchy, the ADS1286 belongs to the ADC category, uses a successive-approximation architecture, and includes a sample-and-hold front end. Its differential input can measure the voltage between two input nodes, which is useful when the source has a nonzero ground reference or common-mode voltage.

The ADS1286 supports sampling at 20 kHz while resolving 12-bit data. Its serial interface is compatible with SPI and SSI protocols and can operate over a two-wire or three-wire connection. The 250 uA supply current supports remote and battery-influenced instrumentation, while the integrated sample-and-hold amplifier reduces the external signal-conditioning required for many low-frequency analog measurements.

The ADS1286UC uses a successive-approximation conversion architecture and a single differential input. Its operating range is -40 °C to +85 °C, and the 8-pin SOIC package supports surface-mount assembly. The 4.5 V to 5.25 V supply requirement places it in conventional 5 V analog systems, where careful reference grounding and input filtering remain important for stable conversion performance.

Typical uses include industrial process measurement, battery-powered environmental sensors, portable medical instrumentation, low-level pressure monitoring, and embedded data-acquisition systems. The serial interface also allows the converter to connect directly to a microcontroller while reducing the number of external signal lines.

For reliable operation, decouple the supply close to the device, connect the analog and digital return paths carefully, and use the reference and differential-input pins according to the manufacturer pin-description table. A common-mode voltage outside the input range can impair conversion accuracy even when the differential signal itself is within range.

This page combines manufacturer specifications, same-footprint ordering options, application guidance, and design notes to support component selection and PCB implementation. It also distinguishes verified drop-in options from broader functional ADC substitutions that may require different footprints, interfaces, or software support.

Mga alternatibo na pwedeng ilagay na ADS1286UC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ADS1286UC (parehas na form factor at footprint) — pagkakaiba sa Architecture, Package, Input Type, Resolution, Missing Codes.

Texas Instruments
Architecture: SAR (Successive Approximation Register)
Package: 8-pin SOIC (U)
Input Type: Differential with sample-and-hold
Ikabit sa ADS1286UC →
Texas Instruments
Architecture: SAR (Successive Approximation)
Package: 8-SOIC (0.154", 3.90 mm width)
Input Type: Differential with sample-and-hold

ADS1286UB

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
12-bit sampling ADC · 12 bit · 20 kHz · Differential input · 1 · Integrated · 250 µA · SPI and SSI compatible

Magkontak para sa presyo

Tingnan ang Datasheet →

ADS1286U/2K5G4

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
12 bit · SAR (Successive Approximation) · 1 (single-ended or differential) · 20 kSPS · 0 V to 5.3 V · 5 V · 250 uA · SPI / SSI compatible, 2- or 3-wire serial

Magkontak para sa presyo

Tingnan ang Datasheet →

ADS1286U

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 8-pin SOIC
12 bits · 20 kHz · SAR (Successive Approximation Register) · 1 differential input · 4.5 V to 5.25 V (single supply) · 250 uA (typical) · Differential with sample-and-hold · +/-1 LSB (max)

Magkontak para sa presyo

Tingnan ang Datasheet →

ADS1286UC Mga Pinakamataas na Rating at Electrical Characteristics

Pangangasiwaan 12 bit
Rate ng Pagkupita 20 kHz
Architecture Successive approximation (SAR)
Input Type Differential
Number of Input Channels 1
Supply Voltage Range 4.5 V to 5.25 V
Kuru-kuryente ng Pagbibigay 250 uA
Analog Front End Integrated sample-and-hold amplifier
Digital Interface SPI and SSI compatible serial interface
Interface Wiring Two-wire or three-wire serial interface
Hanay ng Temperature na Operasyon -40 °C to +85 °C
Temperature Grade Industrial
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount
Terminal Form Gull wing

Gabay sa Pin Configuration ng ADS1286UC 8-pin soic

Pin configuration para sa ADS1286UC (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin soic package para sa ADS1286UC

Wala ng detalyadong pinout data na magagamit para sa ADS1286UC.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ADS1286UC ay nararapat para sa 6 aplikasyons: Industrial Process Measurement, Battery-Powered Environmental Sensors, Portable Medical Instrumentation, Pressure and Level Monitoring, Embedded Data Acquisition, Remote Telemetry.

🏭

Industrial Process Measurement

The ADS1286UC fits industrial process measurement because it combines 12-bit resolution, a 20 kHz sampling rate, and a differential input in a compact 8-pin SOIC package. Place the converter at the transmitter end of a low-level sensor interface so that the measured voltage difference can be converted before cable noise and ground offsets add uncertainty. Its 250 uA supply current reduces the burden on remote sensor loops, while the two-wire serial option minimizes host-controller connections. Verify that the process signal, common-mode voltage, and reference remain inside the device limits.

🧩

Battery-Powered Environmental Sensors

The ADS1286UC is appropriate for battery-powered environmental sensors that monitor temperature, humidity, pressure, or other slowly changing analog quantities. Its 12-bit resolution provides 4096 digital codes, while the 20 kHz sampling capability is more than sufficient for common low-frequency environmental measurements. The 250 uA supply current helps preserve battery capacity during periodic sampling, and the SPI- or SSI-compatible interface permits efficient connection to a low-power microcontroller. Duty cycle, reference current, and regulator losses should also be included in the final energy calculation.

💊

Portable Medical Instrumentation

The ADS1286UC can support portable medical instrumentation when the required signal bandwidth and accuracy fit a 12-bit, 20 kHz converter. Its differential input is useful for sensor signals that are small or referenced above the instrument ground, while the integrated sample-and-hold amplifier reduces front-end complexity. The compact 8-pin SOIC package leaves board area for the sensor interface and signal conditioning. For diagnostic or patient-connected circuits, complete the appropriate medical risk assessment, isolation design, validation, and regulatory review rather than relying on general component suitability alone.

⚡

Pressure and Level Monitoring

The ADS1286UC suits pressure- and level-monitoring systems that use resistive, capacitive, or differential bridge-derived voltages. Its 12-bit resolution and 20 kHz sampling rate can capture dynamic system response while the differential input helps reject signals common to both sensor inputs. The 250 uA supply current is advantageous in remote installations where energy is constrained. Place the converter near the sensor interface, maintain a clean reference, and confirm that the bridge excitation, common-mode voltage, and return paths remain compatible with the 4.5 V to 5.25 V supply range.

🔧

Embedded Data Acquisition

The ADS1286UC supports embedded data-acquisition modules requiring compact sampling and a simple serial connection to a microcontroller. A 20 kHz conversion rate is suitable for many control, monitoring, and slow-signal waveform tasks, while the two-wire or three-wire serial interface allows the host to select the wiring arrangement that best fits its available pins. The 8-pin SOIC package simplifies board-area planning, and the 250 uA supply current supports small embedded platforms. Confirm the required data rate, reference accuracy, acquisition timing, and digital interface implementation before finalizing the circuit.

🌐

Remote Telemetry

The ADS1286UC is useful in remote telemetry equipment where a sensor signal must be digitized close to its source before transmission. Its differential input accommodates common-mode sensor signals, and the 250 uA operating current is valuable when the node is battery powered or remotely powered. The 12-bit resolution and 20 kHz sampling rate cover many temperature, pressure, and equipment-condition measurements, while the compact serial interface limits wiring overhead. Use local decoupling and careful grounding to prevent reference noise and ground potential differences from degrading the converted result.

What are the key specifications of ADS1286UC that engineers should know?
The ADS1286UC is a 12-bit, 20 kHz SAR analog-to-digital converter with one differential input, 250 uA supply current, and an 8-pin SOIC package. According to the Texas Instruments ADS1286 datasheet, it includes a sample-and-hold amplifier and supports SPI- and SSI-compatible communication over two-wire or three-wire interfaces. The operating supply range is 4.5 V to 5.25 V, making it appropriate for compact 5 V measurement systems requiring moderate sampling speed and low standby power.
What is the sampling rate and resolution of ADS1286UC?
The ADS1286UC samples at up to 20 kHz and provides 12-bit resolution. According to the Texas Instruments ADS1286 datasheet, the device uses a successive-approximation architecture with an integrated sample-and-hold amplifier. This combination is intended for low-to-moderate-frequency analog measurement rather than high-bandwidth waveform acquisition. The one differential input also allows measurement of a voltage difference between two analog nodes instead of requiring the signal to be referenced directly to ground.
Where can I download the ADS1286UC datasheet PDF?
The ADS1286UC datasheet PDF is available from the official Texas Instruments product link at https://www.ti.com/lit/ds/symlink/ads1286.pdf. The document describes the 12-bit architecture, 20 kHz sampling rate, differential input, 250 uA supply current, and SPI- or SSI-compatible serial interface. It is also the primary document for assigning the eight package pins, selecting the reference network, and implementing the recommended power and grounding arrangement.
Where can I find the ADS1286UC pinout?
Use the pin-description table in the Texas Instruments ADS1286 datasheet to identify every ADS1286UC connection. The converter is supplied in an 8-pin SOIC package, and the package drawing provides the physical pin numbering. Confirm the numbered pins against the PCB footprint before routing the analog inputs, supply, reference, clock, and serial-control signals. The datasheet should be treated as the controlling document whenever a board revision changes pin assignments.
How much current does ADS1286UC consume?
The ADS1286UC consumes 250 uA of supply current. According to the Texas Instruments ADS1286 datasheet, this low current complements the converter's 12-bit resolution and 20 kHz maximum sampling rate. The value is important when the device is used in remote sensing, portable instrumentation, or continuously monitored systems because it contributes directly to the average power budget. Confirm the final system demand by including the ADC, reference circuitry, interface activity, and external loads.
What serial interfaces does ADS1286UC support?
The ADS1286UC supports SPI- and SSI-compatible serial communication and can use a two-wire or three-wire interface. According to the Texas Instruments ADS1286 datasheet, this flexibility allows the converter to connect with microcontrollers that expose either conventional SPI hardware or simpler serial inputs. The two-wire option reduces pin usage, while the three-wire option provides a separate data path. Verify the host controller's clocking and data-capture behavior against the converter's serial timing diagrams.
Where can I buy ADS1286UC online?
Use the Request a Quote form on this page to request ADS1286UC availability, order details, and current sourcing support. The form provides a direct purchasing path without relying on static availability or market information that may change. For product confirmation, include the full ADS1286UC suffix, the required quantity, and the preferred shipment destination. The device is an 8-pin SOIC, industrial-temperature 12-bit ADC from Texas Instruments.
What is the price of ADS1286UC?
Request the current ADS1286UC price through the Request a Quote form on this page. The form is the appropriate channel for quantity pricing, order scheduling, and current component availability rather than a static quote. For a complete request, specify the required order quantity, reel or tray preference, and delivery location. Texas Instruments identifies ADS1286UC as an industrial-temperature, 8-pin SOIC, 12-bit, 20 kHz analog-to-digital converter.
What is the lead time and stock status for ADS1286UC?
Request current ADS1286UC stock status and lead time through the Request a Quote form on this page. Lead time can depend on order quantity, packaging, and current factory and distribution conditions, so it should be confirmed for the specific production demand. Include the target quantity and desired delivery date in the request. The part identification is ADS1286UC, an 8-pin SOIC version of the 12-bit, 20 kHz ADS1286 converter.
What is the difference between ADS1286UC and ADS1286UB?
The ADS1286UC and ADS1286UB are both listed as 8-pin SOIC versions of the ADS1286 12-bit, 20 kHz differential-input ADC. Their headline converter ratings are therefore the same, with 0% difference in resolution and sampling rate. The exact ordering-option distinction must be confirmed from the manufacturer ordering information before substitution. Both should be assessed against the required supply range, temperature grade, pinout, and lifecycle status.
ADS1286UC vs ADS1286U/2K5G4 - which is better for a 5 V design?
Choose ADS1286UC for a design built around the standard ADS1286 configuration and its 4.5 V to 5.25 V supply range. The ADS1286U/2K5G4 is an ordering option associated with a 2.5 V reference designation, so it can require different reference-network and component-selection decisions even though the underlying 12-bit, 20 kHz converter ratings match. Compare the complete ordering tables, pin functions, reference requirements, and qualification conditions before choosing.
When should I choose ADS1286UC over another same-package ADC?
Choose ADS1286UC when the design needs a 12-bit differential ADC with a 20 kHz sampling rate, approximately 250 uA supply current, and an SPI- or SSI-compatible serial interface in an 8-pin SOIC package. Its integrated sample-and-hold amplifier simplifies low-frequency front ends, while the two-wire option can conserve host-controller pins. Choose another converter instead when the design requires more channels, higher resolution, faster sampling, a different interface protocol, or a larger input range.
Is ADS1286UC suitable for battery-powered sensor measurement?
The ADS1286UC is suitable for low-power sensor measurement because its supply current is 250 uA and its normal analog supply range is 4.5 V to 5.25 V. The 12-bit resolution and 20 kHz sampling rate are suitable for many temperature, pressure, level, and slow-motion measurements. For a battery design, include regulator losses, reference current, host activity, and required duty cycle in the energy budget rather than considering only the converter's specified current.
What can replace ADS1286UC without changing the PCB?
The closest documented drop-in candidates are ADS1286UB and ADS1286U/2K5G4 because they are associated with the same ADS1286 family and 8-pin SOIC footprint. The ADS1286UC and ADS1286UB share the 12-bit, 20 kHz headline ratings, while ADS1286U/2K5G4 may require different reference arrangements. Verify the exact pinout, reference voltage, temperature grade, and electrical limits in the manufacturer ordering information before approving a replacement.
What is the best cross-brand equivalent for ADS1286UC?
No cross-brand drop-in equivalent is established for ADS1286UC by the manufacturer documentation or the available cross-reference results. A substitute must match the 8-pin SOIC footprint, differential-input arrangement, 4.5 V to 5.25 V supply range, 12-bit resolution, 20 kHz sampling rate, and the required serial timing. Parts with similar resolution but different sampling rates, interfaces, reference schemes, or pin assignments require design review and should not be treated as drop-in replacements.

Impormasyon ng Talumpati sa Engineering for ADS1286UC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose ADS1286UC for compact 5 V measurement systems that require a 12-bit differential ADC, a 20 kHz sampling rate, and approximately 250 uA supply current in an 8-pin SOIC package. Its integrated sample-and-hold amplifier and SPI- or SSI-compatible two-wire or three-wire interface suit sensor nodes, embedded data loggers, and remote telemetry. Consider ADS1286UB when its ordering configuration satisfies the target design; it retains the same headline converter ratings and footprint. Consider ADS1286U/2K5G4 when a 2.5 V reference configuration matches the system, while checking every external component and the resulting input range. ADS1286U is another same-family 8-pin SOIC option whose temperature-grade and ordering details require confirmation. Do not select a generic 12-bit ADC solely by resolution; verify the differential input, reference arrangement, sampling rate, supply range, pinout, and serial timing before approving any substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ADS1286UB ADS1286U/2K5G4 ADS1286U
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bit 12 bit 12 bit 12 bit
Sampling Rate 20 kHz 20 kHz 20 kHz 20 kHz
Architecture Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR)
Input Type Differential Differential Differential Differential
Supply Voltage Range 4.5 V to 5.25 V 4.5 V to 5.25 V 4.5 V to 5.25 V 4.5 V to 5.25 V
Supply Current 250 uA 250 uA 250 uA 250 uA
Digital Interface SPI and SSI compatible SPI and SSI compatible SPI and SSI compatible SPI and SSI compatible

Pangunahing mga Pagkakaiba

  • Low power for a 12-bit SAR converter (kumpara saADS1286UB)
  • Compact 8-pin integration (kumpara saADS1286U/2K5G4)
  • Differential measurement in a single-input package (kumpara saADS1286U)

Talaan ng Disenyo

Place the ADC supply bypass capacitor immediately between the supply and ground pins, and route analog and digital return currents so switching current does not flow through the input-reference path. The ADS1286UC operates from 4.5 V to 5.25 V, so the layout should minimize drops and coupling between the analog front end and the serial interface. Keep the differential-input traces short, matched where practical, and away from clock and switching-node traces.

Confirm the differential input common-mode voltage and full-scale range before applying sensor signals. A differential signal within the input span can still produce inaccurate results if its common-mode component is outside the allowed range. Use the manufacturer input-range diagrams to set scaling, and treat the reference network as part of the measurement chain because reference variation affects the digital result proportionally.

Do not interpret the 20 kHz sampling rate as suitability for every high-frequency waveform. The 12-bit SAR converter is best aligned with low-bandwidth process, sensor, and control signals, where its differential input and low 250 uA supply current provide practical benefits. Use the serial-interface timing diagrams to configure clock polarity, data validity, and conversion timing in the host controller, especially when using the two-wire configuration.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The industrial-temperature ADS1286UC is not identified as an AEC-Q100 automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ADS1286UC datasheet ADS1286UC pinout ADS1286UC datasheet pdf ADS1286UC specifications ADS1286UC ADC ADS1286UC 12 bit ADC ADS1286UC 20 kHz ADS1286UC 250 uA ADS1286UC SOIC-8 pinout ADS1286UC equivalent ADS1286UC replacement ADS1286UC vs ADS1286UB ADS1286UC application circuit Texas Instruments ADS1286UC ADS1286UC price

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments ADS1286UC ADS1286UB ADS1286U/2K5G4 ADS1286U analog-to-digital converter ADC successive-approximation ADC SAR differential input sample-and-hold amplifier SPI SSI 12-bit resolution 20 kHz sampling rate 250 uA supply current 4.5 V to 5.25 V supply SOIC-8 surface mount industrial temperature grade microcontroller sensor measurement remote telemetry embedded data acquisition
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ