ADS1286UC - 12-Bit 20 kHz Micro-Power ADC | Texas Instruments
料号: ADS1286UC ✓ 量产中ADS1286UC 概述
An analog-to-digital converter, or ADC, converts an analog voltage into a numeric code for processing, measurement, logging, or control. Within the semiconductor hierarchy, the ADS1286 belongs to the ADC category, uses a successive-approximation architecture, and includes a sample-and-hold front end. Its differential input can measure the voltage between two input nodes, which is useful when the source has a nonzero ground reference or common-mode voltage.
The ADS1286 supports sampling at 20 kHz while resolving 12-bit data. Its serial interface is compatible with SPI and SSI protocols and can operate over a two-wire or three-wire connection. The 250 uA supply current supports remote and battery-influenced instrumentation, while the integrated sample-and-hold amplifier reduces the external signal-conditioning required for many low-frequency analog measurements.
The ADS1286UC uses a successive-approximation conversion architecture and a single differential input. Its operating range is -40 °C to +85 °C, and the 8-pin SOIC package supports surface-mount assembly. The 4.5 V to 5.25 V supply requirement places it in conventional 5 V analog systems, where careful reference grounding and input filtering remain important for stable conversion performance.
Typical uses include industrial process measurement, battery-powered environmental sensors, portable medical instrumentation, low-level pressure monitoring, and embedded data-acquisition systems. The serial interface also allows the converter to connect directly to a microcontroller while reducing the number of external signal lines.
For reliable operation, decouple the supply close to the device, connect the analog and digital return paths carefully, and use the reference and differential-input pins according to the manufacturer pin-description table. A common-mode voltage outside the input range can impair conversion accuracy even when the differential signal itself is within range.
This page combines manufacturer specifications, same-footprint ordering options, application guidance, and design notes to support component selection and PCB implementation. It also distinguishes verified drop-in options from broader functional ADC substitutions that may require different footprints, interfaces, or software support.
直接替换替代料: ADS1286UC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADS1286UC (相同外形与封装尺寸) ——差异在于 Architecture, Package, Input Type, Resolution, Missing Codes.
ADS1286UB
✅ 直接替换联系询价
查看数据手册 →ADS1286U/2K5G4
✅ 直接替换联系询价
查看数据手册 →ADS1286UC 最大额定值与电气特性
| 分辨率 | 12 bit |
| 采样率 | 20 kHz |
| Architecture | Successive approximation (SAR) |
| Input Type | Differential |
| Number of Input Channels | 1 |
| Supply Voltage Range | 4.5 V to 5.25 V |
| 电源电流 | 250 uA |
| Analog Front End | Integrated sample-and-hold amplifier |
| Digital Interface | SPI and SSI compatible serial interface |
| Interface Wiring | Two-wire or three-wire serial interface |
| 工作温度范围 | -40 °C to +85 °C |
| Temperature Grade | Industrial |
| 封装 | 8-pin SOIC |
| 安装类型 | Surface mount |
| Terminal Form | Gull wing |
ADS1286UC 8-pin soic 引脚配置指南
ADS1286UC(8-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: ADS1286UC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADS1286UC 适用于 6 应用s: Industrial Process Measurement, Battery-Powered Environmental Sensors, Portable Medical Instrumentation, Pressure and Level Monitoring, Embedded Data Acquisition, Remote Telemetry.
Industrial Process Measurement
The ADS1286UC fits industrial process measurement because it combines 12-bit resolution, a 20 kHz sampling rate, and a differential input in a compact 8-pin SOIC package. Place the converter at the transmitter end of a low-level sensor interface so that the measured voltage difference can be converted before cable noise and ground offsets add uncertainty. Its 250 uA supply current reduces the burden on remote sensor loops, while the two-wire serial option minimizes host-controller connections. Verify that the process signal, common-mode voltage, and reference remain inside the device limits.
推荐
Battery-Powered Environmental Sensors
The ADS1286UC is appropriate for battery-powered environmental sensors that monitor temperature, humidity, pressure, or other slowly changing analog quantities. Its 12-bit resolution provides 4096 digital codes, while the 20 kHz sampling capability is more than sufficient for common low-frequency environmental measurements. The 250 uA supply current helps preserve battery capacity during periodic sampling, and the SPI- or SSI-compatible interface permits efficient connection to a low-power microcontroller. Duty cycle, reference current, and regulator losses should also be included in the final energy calculation.
推荐
Portable Medical Instrumentation
The ADS1286UC can support portable medical instrumentation when the required signal bandwidth and accuracy fit a 12-bit, 20 kHz converter. Its differential input is useful for sensor signals that are small or referenced above the instrument ground, while the integrated sample-and-hold amplifier reduces front-end complexity. The compact 8-pin SOIC package leaves board area for the sensor interface and signal conditioning. For diagnostic or patient-connected circuits, complete the appropriate medical risk assessment, isolation design, validation, and regulatory review rather than relying on general component suitability alone.
推荐
Pressure and Level Monitoring
The ADS1286UC suits pressure- and level-monitoring systems that use resistive, capacitive, or differential bridge-derived voltages. Its 12-bit resolution and 20 kHz sampling rate can capture dynamic system response while the differential input helps reject signals common to both sensor inputs. The 250 uA supply current is advantageous in remote installations where energy is constrained. Place the converter near the sensor interface, maintain a clean reference, and confirm that the bridge excitation, common-mode voltage, and return paths remain compatible with the 4.5 V to 5.25 V supply range.
推荐
Embedded Data Acquisition
The ADS1286UC supports embedded data-acquisition modules requiring compact sampling and a simple serial connection to a microcontroller. A 20 kHz conversion rate is suitable for many control, monitoring, and slow-signal waveform tasks, while the two-wire or three-wire serial interface allows the host to select the wiring arrangement that best fits its available pins. The 8-pin SOIC package simplifies board-area planning, and the 250 uA supply current supports small embedded platforms. Confirm the required data rate, reference accuracy, acquisition timing, and digital interface implementation before finalizing the circuit.
推荐
Remote Telemetry
The ADS1286UC is useful in remote telemetry equipment where a sensor signal must be digitized close to its source before transmission. Its differential input accommodates common-mode sensor signals, and the 250 uA operating current is valuable when the node is battery powered or remotely powered. The 12-bit resolution and 20 kHz sampling rate cover many temperature, pressure, and equipment-condition measurements, while the compact serial interface limits wiring overhead. Use local decoupling and careful grounding to prevent reference noise and ground potential differences from degrading the converted result.
推荐
推荐产品汇总
工程参考数据: ADS1286UC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADS1286UB | ADS1286U/2K5G4 | ADS1286U |
|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 20 kHz | 20 kHz | 20 kHz | 20 kHz |
| Architecture | Successive approximation (SAR) | Successive approximation (SAR) | Successive approximation (SAR) | Successive approximation (SAR) |
| Input Type | Differential | Differential | Differential | Differential |
| Supply Voltage Range | 4.5 V to 5.25 V | 4.5 V to 5.25 V | 4.5 V to 5.25 V | 4.5 V to 5.25 V |
| Supply Current | 250 uA | 250 uA | 250 uA | 250 uA |
| Digital Interface | SPI and SSI compatible | SPI and SSI compatible | SPI and SSI compatible | SPI and SSI compatible |
关键差异点
- Low power for a 12-bit SAR converter (对比 ADS1286UB)
- Compact 8-pin integration (对比 ADS1286U/2K5G4)
- Differential measurement in a single-input package (对比 ADS1286U)
设计说明
Place the ADC supply bypass capacitor immediately between the supply and ground pins, and route analog and digital return currents so switching current does not flow through the input-reference path. The ADS1286UC operates from 4.5 V to 5.25 V, so the layout should minimize drops and coupling between the analog front end and the serial interface. Keep the differential-input traces short, matched where practical, and away from clock and switching-node traces.
Confirm the differential input common-mode voltage and full-scale range before applying sensor signals. A differential signal within the input span can still produce inaccurate results if its common-mode component is outside the allowed range. Use the manufacturer input-range diagrams to set scaling, and treat the reference network as part of the measurement chain because reference variation affects the digital result proportionally.
Do not interpret the 20 kHz sampling rate as suitability for every high-frequency waveform. The 12-bit SAR converter is best aligned with low-bandwidth process, sensor, and control signals, where its differential input and low 250 uA supply current provide practical benefits. Use the serial-interface timing diagrams to configure clock polarity, data validity, and conversion timing in the host controller, especially when using the two-wire configuration.
合规信息
The industrial-temperature ADS1286UC is not identified as an AEC-Q100 automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.