AK4382AVT - 24-Bit Stereo I2S Audio DAC | AKM
MPN: AK4382AVT ✗ Tapus ng BuhayAK4382AVT Ulas
A delta-sigma DAC is a data converter that uses oversampling and digital noise shaping to convert digital audio samples into an analog output. It belongs to the broader DAC, data-converter, signal-conversion, and semiconductor hierarchies. In an audio signal chain, the AK4382AVT typically accepts digital samples from a USB interface, audio processor, or digital transport and produces differential analog outputs for a headphone or line-output amplifier stage.
The AK4382AVT provides 24-bit resolution, two audio channels, and an I2S interface. The manufacturer datasheet identifies a 112 dB dynamic-range figure and supports operation up to 192 kHz, while one distributor listing also identifies a 216 kHz sampling-rate category. Its advanced multi-bit delta-sigma architecture is intended to balance dynamic range, linearity, and implementation cost in digital audio equipment.
The device operates from a 5 V supply and is specified for an ambient operating range of -40 °C to +85 °C. The AK4382AVT is packaged in a 16-pin TSSOP for surface-mount assembly. Its reel designation identifies the supplied component as a production packing option, allowing use in automated PCB assembly and volume manufacturing.
Typical applications include high-resolution audio DAC boards, USB and network audio players, digital mixing consoles, audio receivers, professional audio interfaces, and premium consumer playback equipment. It is also suitable for evaluation platforms where a stereo I2S-to-analog conversion stage is required before adding a high-current output amplifier.
The primary layout consideration is digital-clock and analog-output isolation. Route the I2S data, bit clock, and master clock away from the analog output network, use a continuous ground reference, and follow the manufacturer pin-description and typical-application circuits when assigning decoupling and output-filter components. Correct supply bypassing and controlled clocking are essential for preserving the specified signal-to-noise performance.
This page organizes the technical specifications, sourcing guidance, compatible ordering codes, comparison information, and practical design considerations into a consolidated engineering reference for evaluating the AK4382AVT in precision stereo audio designs.
Mga alternatibo na pwedeng ilagay na AK4382AVT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
AK4382AVT-E2
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AK4382AVTP-E2
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AK4382AVT Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Stereo audio digital-to-analog converter |
| Converter Architecture | Advanced multi-bit delta-sigma |
| Number of Channels | 2 channels |
| Pangangasiwaan | 24 bits |
| Dynamic Range | 112 dB |
| Maximum Sampling Rate | 192 kHz |
| Distributor Sampling-Rate Category | 216 kHz |
| Digital Audio Interface | I2S |
| Volte ng Pagbibigay | 5 V |
| Supply Type | Single supply |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C |
| Packhaging | 16-pin TSSOP |
| Style ng Pagpapasok | Surface-mount |
| Shipping Package | Reel |
| Output Kumpigurasyon | Differential output |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Bilang ng Pin | 16 pins |
Gabay sa Pin Configuration ng AK4382AVT reel
Pin configuration para sa AK4382AVT (reel package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AK4382AVT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AK4382AVT ay nararapat para sa 6 aplikasyons: High-Resolution USB Audio Player, Network Audio Streaming Receiver, Professional Audio Monitor Controller, Digital Mixing Console Output Stage, Premium CD and Network Player, Digital Audio Evaluation Board.
High-Resolution USB Audio Player
The AK4382AVT fits a USB-audio player that converts an I2S digital stream into analog stereo audio. Its 24-bit resolution and manufacturer-specified 112 dB dynamic range provide a clear performance baseline for lossless playback, while its advanced multi-bit delta-sigma architecture supports low-distortion conversion. The I2S input can connect to a USB audio controller, and the differential outputs can feed a line-output or headphone-driver stage. Correct master-clock generation, low-jitter routing, short supply connections, and separate analog return paths remain important for preserving the converter's full dynamic range.
Inirekomenda
Network Audio Streaming Receiver
The AK4382AVT is suitable for a network streaming receiver that receives decoded PCM data and produces analog audio. A 192 kHz maximum sampling rate supports high-resolution source material, while the two-channel topology matches conventional stereo playback. The digital processor can supply I2S data and clocks, and the AK4382AVT can convert them into differential analog signals for a line stage or headphone amplifier. Keep clock routing compact, isolate digital return currents from the analog output region, and use the manufacturer's recommended filtering network to maintain acceptable channel separation and distortion.
Inirekomenda
Professional Audio Monitor Controller
The AK4382AVT can serve as the stereo conversion stage in a professional monitor controller receiving digital audio from a mixer or interface. Its 24-bit resolution, 112 dB dynamic range, and operation up to 192 kHz suit monitoring paths that require accurate signal capture over a broad frequency and level range. Differential analog outputs reduce susceptibility to common-mode noise when connected to a balanced line stage. The design should maintain continuous grounding, minimize analog trace length, and separate converter output routing from switching supplies and high-speed digital clocks.
Inirekomenda
Digital Mixing Console Output Stage
The AK4382AVT is appropriate for a digital mixing console or stereo master-output card where a compact two-channel DAC is needed. It converts the final I2S mix into differential analog signals for balanced line-level circuitry. The 24-bit data path and 112 dB dynamic range support a quality conversion stage, while the 16-pin TSSOP package simplifies dense surface-mount layouts. Clocking must remain synchronized with the console's audio engine, and the output network should use the manufacturer-recommended filter and grounding arrangement to preserve linearity.
Inirekomenda
Premium CD and Network Player
The AK4382AVT can be used in a premium CD or network player where a dedicated stereo conversion stage improves system organization. It accepts digital audio over I2S and provides differential analog outputs for a downstream line amplifier. Its 24-bit resolution, 112 dB dynamic range, and support for sampling rates up to 192 kHz make it suitable for modern high-resolution playback as well as conventional 44.1 kHz and 48 kHz sources. The analog section should use short, symmetrical routing and supply filtering that meet the manufacturer application guidance.
Inirekomenda
Digital Audio Evaluation Board
The AK4382AVT is well suited to a digital-audio evaluation board because it provides a complete stereo I2S-to-analog conversion function in a 16-pin TSSOP. Designers can evaluate the manufacturer's advanced multi-bit delta-sigma architecture, 24-bit resolution, and 112 dB dynamic range before adding output amplifiers and filters. The board should expose test points for data, bit clock, master clock, supply, ground, and both differential outputs. Use controlled clock sources and follow the typical application circuit so evaluation results reflect the intended converter configuration.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AK4382AVT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AK4382AVT-E2 | AK4382AVTP-E2 |
|---|---|---|---|
| Device Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Resolution | 24 bits | 24 bits | 24 bits |
| Number of Channels | 2 channels | 2 channels | 2 channels |
| Dynamic Range | 112 dB | 112 dB | 112 dB |
| Digital Audio Interface | I2S | I2S | I2S |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz |
| Supply Voltage | 5 V | 5 V | 5 V |
| Converter Architecture | Advanced multi-bit delta-sigma | Advanced multi-bit delta-sigma | Advanced multi-bit delta-sigma |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Output Configuration | Differential output | Differential output | Differential output |
Pangunahing mga Pagkakaiba
- Direct ordering-code replacement (kumpara saAK4382AVT-E2)
- Identical electrical design with supplier-code suffix (kumpara saAK4382AVTP-E2)
- Purpose-built stereo high-resolution conversion (kumpara saES906K)
- Compact surface-mount format (kumpara saMAX9887)
- Manufacturer-defined 112 dB dynamic range (kumpara saCS4398)
Talaan ng Disenyo
Separate the digital and analog signal regions around the AK4382AVT. Route I2S data, bit clock, and master clock away from the differential output traces, and connect the output return directly to the device ground reference using a continuous plane. Place the manufacturer-recommended output-filter components close to their associated pins. This arrangement limits digital crosstalk into the analog outputs and helps preserve the specified 112 dB dynamic range.
Use the manufacturer-recommended bypass network and place each local decoupling capacitor close to the corresponding AK4382AVT supply pin. The converter operates from a 5 V single supply, but supply noise and impedance can still modulate the analog output. Keep high-current switching circuitry away from the DAC and provide a low-impedance return path. Verify startup behavior at the system level because the external clock and supply sequence must not create an invalid operating state.
Do not substitute a generic stereo DAC solely because it also has an I2S input and two output channels. Pin assignments, clock modes, differential-output voltage, supply voltage, filter requirements, and output impedance must be checked before replacement. For direct substitution, use AK4382AVT-E2 or AK4382AVTP-E2, whose ordering codes are documented as electrically identical to AK4382AVT. For other devices, perform a complete timing and analog-circuit review.
Treat the I2S clock signals as high-speed digital nets even at moderate audio sample rates. Match clock routing to the source driver's capability, minimize stubs, and keep the master clock away from analog output components. A clean clock relationship is necessary for valid stereo framing and stable conversion. If the source device cannot provide the required clock mode, use a local clock generator or a properly designed interface rather than altering clock timing at the DAC pins.
Impormasyon ng Pagsunod sa Kautusan
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product information. AEC-Q100 is treated as not applicable because the AK4382AVT is an audio converter rather than an automotive-qualified component.