AT90CAN128-16AI - 16MHz 128KB AVR CAN MCU | Microchip
MPN: AT90CAN128-16AI ✓ NakahandaAT90CAN128-16AI Ulas
An 8-bit microcontroller is a compact embedded processing device built around an 8-bit register and data architecture. The AT90CAN128 belongs to the hierarchy of AVR enhanced RISC microcontrollers, embedded controllers, and general-purpose semiconductors. Its single-clock-cycle instruction execution and integrated CAN interface make it useful for control systems that require deterministic field-bus communication without a separate communications controller.
Key features include 128 KB of read-while-write ISP flash, 4 KB of EEPROM, 4 KB of SRAM, 32 general-purpose working registers, and 53 I/O lines. The device also provides four flexible timer/counters with compare and PWM modes, two USARTs, a byte-oriented two-wire serial interface, and a real-time counter. The CAN controller supports both CAN V2.0A and V2.0B protocol versions.
The AT90CAN128-16AI operates from 2.7 V to 5.5 V at up to 16 MHz and is specified over -40°C to +85°C. Its automotive-family data sheet reports qualification to AEC-Q100 for relevant family variants, while the -16AI ordering code is used for industrial-temperature production. The 64-TQFP package measures 14 mm by 14 mm and uses a surface-mount assembly process.
Typical applications include industrial CAN gateways, automotive body and accessory controllers, factory automation nodes, environmental monitoring equipment, and service tools that communicate with CAN 2.0 networks. Firmware can be programmed through the in-system programming interface, while bootloading and application code occupy the large on-chip flash memory.
Design with the CAN transceiver outside the microcontroller and connect the AT90CAN128 CAN_RX and CAN_TX pins through that interface. Keep the CAN bus differential traces short, symmetric, and away from switching nodes, and terminate both ends of the bus with the termination resistance specified by the network design. Confirm clock stability, reset behavior, and decoupling against the manufacturer datasheet before releasing a PCB.
This page combines the family datasheet specifications, package details, ordering-code comparisons, and application guidance with practical drop-in alternatives and PCB-level design considerations. These resources help engineers evaluate CAN protocol compatibility, peripheral availability, timing margins, and second-source options before committing to a design.
Mga alternatibo na pwedeng ilagay na AT90CAN128-16AI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AT90CAN128-16AI (parehas na form factor at footprint) — pagkakaiba sa General-Purpose I/O Lines, General-Purpose Working Registers, Package, CAN Controller, Flash Memory.
AT90CAN128-16AU
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AT90CAN128-16AUR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AT90CAN128-16AJ
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AT90CAN128-16AU
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AT90CAN128-16AI
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AT90CAN128-16AI Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 8-bit RISC Flash Microcontroller |
| Architecture | AVR enhanced RISC |
| Maximum Clock Speed | 16 MHz |
| Program Flash Memory | 128 KB |
| Flash Programming | In-System Programmable with Read-While-Write |
| EEPROM | 4 KB |
| SRAM | 4 KB |
| General-Purpose I/O Lines | 53 |
| General-Purpose Working Registers | 32 |
| CAN Controller | CAN V2.0A and CAN V2.0B compliant |
| Timer/Counters | 4 with compare modes and PWM |
| USART Interfaces | 2 |
| Two-Wire Serial Interface | 1 byte-oriented interface |
| Real-Time Counter | 1 |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Packhaging | 64-TQFP, 14 mm x 14 mm |
| Uri ng Pagpapasok | Surface Mount |
| Process Technology | Low-power CMOS |
Gabay sa Pin Configuration ng AT90CAN128-16AI 64-tqfp, 14 mm x 14 mm
Pin configuration para sa AT90CAN128-16AI (64-tqfp, 14 mm x 14 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa AT90CAN128-16AI.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AT90CAN128-16AI ay nararapat para sa 6 aplikasyons: Industrial CAN Automation Node, Automotive Body and Accessory Controller, CAN-Based Environmental Monitoring Unit, CAN Gateway and Protocol Bridge, Factory Equipment Service Interface, CAN-Based Lighting and Auxiliary Control.
Industrial CAN Automation Node
The AT90CAN128-16AI fits an industrial automation node that must control local I/O while exchanging real-time data over a CAN 2.0 network. Its 16 MHz AVR core supports approximately 1 MIPS throughput, while 53 I/O lines leave substantial capacity for sensors, discrete outputs, status indicators, and service connectors. The integrated CAN controller supports CAN V2.0A and V2.0B, removing the need for an external protocol controller. Place the device beside an external CAN transceiver, keep the bus path compact, and terminate the network at both physical ends. The 2.7 V to 5.5 V operating range also supports 3.3 V and 5 V industrial rails.
Inirekomenda
Automotive Body and Accessory Controller
The AT90CAN128-16AI can serve as a body or accessory controller when the vehicle network uses CAN 2.0 and the module requires multiple local I/O functions. Its four timer/counters provide compare and PWM outputs for valves, lamps, or motor-control assistance, while two USARTs support service diagnostics and external sensors. The CAN V2.0A and V2.0B controller integrates directly into the module architecture. Automotive implementations should use the appropriate qualified family variant and validate the exact ordering code against Microchip automotive data sheet doc7682.pdf, including temperature, transient, and qualification requirements.
Inirekomenda
CAN-Based Environmental Monitoring Unit
A remote environmental monitor benefits from the AT90CAN128-16AI's combination of 53 I/O lines and a networked CAN interface. Inputs can cover temperature, humidity, smoke, water-level, and analog sensor conditioning, while outputs control indicators or sampling relays. Four flexible timer/counters with PWM and compare modes support periodic sampling and local actuator timing, and the real-time counter provides an independent scheduling resource. Its 4 KB EEPROM can retain calibration values and node identifiers, while the 128 KB flash provides room for protocol handling, diagnostics, and a bootloader.
Inirekomenda
CAN Gateway and Protocol Bridge
The AT90CAN128-16AI is appropriate for a gateway that bridges a CAN 2.0 segment to another serial or embedded subsystem. Two USARTs can connect downstream equipment, while the byte-oriented two-wire interface supports sensors or configuration storage. The 4 KB SRAM is sufficient for protocol buffering in modest gateway designs, and the 128 KB flash allows protocol translation, filtering, diagnostics, and firmware update logic. Separate CAN transceiver circuitry is required because the MCU provides the digital controller, not the bus differential driver. Validate bit timing, error handling, and bus termination during integration testing.
Inirekomenda
Factory Equipment Service Interface
The AT90CAN128-16AI can implement a local service interface on industrial equipment while the machine's main controller continues to operate over CAN. The two USARTs support a technician console and an external service adapter, and the two-wire interface permits connection to a maintenance peripheral or configuration storage. Because the device provides 53 general-purpose I/O, it can also supervise door switches, emergency-stop status, indicators, and relay feedback. Use the two USARTs and CAN controller for interrupt-driven event handling, and keep service connectors away from high-current switching traces to reduce noise coupling.
Inirekomenda
CAN-Based Lighting and Auxiliary Control
The AT90CAN128-16AI can control lighting or auxiliary loads in an equipment network where a CAN master issues commands to distributed modules. Its PWM-capable timer/counters drive dimming, relays, or indicators, and its 53 I/O lines handle local switches and status feedback. The 16 MHz processing rate leaves headroom for command validation, debouncing, diagnostics, and communication error handling. For long cable runs or electrically noisy machinery, maintain a defined CAN network topology, use a qualified transceiver, route the bus away from motors, and verify common-mode voltage at the module interface.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AT90CAN128-16AI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AT90CAN128-16AU | AT90CAN128-16AUR | AT90CAN128-16AJ | AT90CAN128-16A |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) |
| Clock Speed | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| EEPROM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| General-Purpose I/O | 53 lines | 53 lines | 53 lines | 53 lines | 53 lines |
| CAN Protocol Support | CAN V2.0A and CAN V2.0B | CAN V2.0A and CAN V2.0B | CAN V2.0A and CAN V2.0B | CAN V2.0A and CAN V2.0B | CAN V2.0A and CAN V2.0B |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Timer/Counters | 4 with compare and PWM modes | 4 with compare and PWM modes | 4 with compare and PWM modes | 4 with compare and PWM modes | 4 with compare and PWM modes |
Pangunahing mga Pagkakaiba
- Integrated CAN controller eliminates an external protocol controller (kumpara saATMEGA128-16ANR)
- Large integrated memory supports standalone CAN nodes (kumpara saAT90CAN64-16AU)
- Same-family ordering alternatives simplify second-source review (kumpara saAT90CAN128-16AUR)
- Broad serial and timing resources cover more local functions (kumpara saATMEGA128-16ANR)
Talaan ng Disenyo
The AT90CAN128 CAN_RX and CAN_TX signals are digital MCU signals and must connect to an external CAN transceiver rather than directly to a differential bus. Route the MCU-to-transceiver path as a short pair, keep the transceiver close to the connector, and place the bus termination only at the physical ends of the network. Avoid routing CAN traces alongside switching-power nodes, relay contacts, or motor drive outputs.
Operate the device within its 2.7 V to 5.5 V supply range and follow the decoupling configuration in the manufacturer family data sheet. Place low-ESR capacitors at the supply pins with short ground returns, and use a quiet ground-plane connection for the MCU and CAN transceiver. If a switching regulator supplies the rail, reserve filtering or an LDO for the transceiver and MCU section when conducted and radiated emissions become critical.
CAN bit timing depends on the selected clock source and oscillator tolerance. Use the clock configuration recommended for the board, account for temperature-dependent frequency variation, and verify the point-to-point delay budget with the transceiver and cable characteristics included. Validate the controller's sample point and propagation delay settings in the deployed bus, including bus loading, rather than relying only on a bench test with short cables.
Do not treat the AT90CAN128 and ATMEGA128 as firmware-compatible merely because both use the AVR architecture. Microchip application note AVR096 explains that their electrical characteristics differ and that a migration requires datasheet review. Preserve the exact 64-pin land pattern, verify CAN pin assignments, check reset and programming connections, and retest interrupt priorities, timing, and startup behavior after changing ordering codes or device families.
Impormasyon ng Pagsunod sa Kautusan
Microchip automotive data sheet doc7682.pdf states that the AT90CAN32, AT90CAN64, and AT90CAN128 family has undergone AEC-Q100 qualification. The AT90CAN128-16AI ordering code is an industrial-temperature configuration, so the automotive qualification must not be applied directly to this exact orderable variant.