AT90CAN128-16AI - 16MHz 128KB AVR CAN MCU | Microchip
MPN: AT90CAN128-16AI ✓ 啟用中AT90CAN128-16AI 概覽
An 8-bit microcontroller is a compact embedded processing device built around an 8-bit register and data architecture. The AT90CAN128 belongs to the hierarchy of AVR enhanced RISC microcontrollers, embedded controllers, and general-purpose semiconductors. Its single-clock-cycle instruction execution and integrated CAN interface make it useful for control systems that require deterministic field-bus communication without a separate communications controller.
Key features include 128 KB of read-while-write ISP flash, 4 KB of EEPROM, 4 KB of SRAM, 32 general-purpose working registers, and 53 I/O lines. The device also provides four flexible timer/counters with compare and PWM modes, two USARTs, a byte-oriented two-wire serial interface, and a real-time counter. The CAN controller supports both CAN V2.0A and V2.0B protocol versions.
The AT90CAN128-16AI operates from 2.7 V to 5.5 V at up to 16 MHz and is specified over -40°C to +85°C. Its automotive-family data sheet reports qualification to AEC-Q100 for relevant family variants, while the -16AI ordering code is used for industrial-temperature production. The 64-TQFP package measures 14 mm by 14 mm and uses a surface-mount assembly process.
Typical applications include industrial CAN gateways, automotive body and accessory controllers, factory automation nodes, environmental monitoring equipment, and service tools that communicate with CAN 2.0 networks. Firmware can be programmed through the in-system programming interface, while bootloading and application code occupy the large on-chip flash memory.
Design with the CAN transceiver outside the microcontroller and connect the AT90CAN128 CAN_RX and CAN_TX pins through that interface. Keep the CAN bus differential traces short, symmetric, and away from switching nodes, and terminate both ends of the bus with the termination resistance specified by the network design. Confirm clock stability, reset behavior, and decoupling against the manufacturer datasheet before releasing a PCB.
This page combines the family datasheet specifications, package details, ordering-code comparisons, and application guidance with practical drop-in alternatives and PCB-level design considerations. These resources help engineers evaluate CAN protocol compatibility, peripheral availability, timing margins, and second-source options before committing to a design.
直接替換替代品,適用於 AT90CAN128-16AI — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AT90CAN128-16AI (相同外形與佔位) — 差異在於 General-Purpose I/O Lines, General-Purpose Working Registers, Package, CAN Controller, Flash Memory.
AT90CAN128-16AU
✅ 直接替換聯絡詢價
查看資料表 →AT90CAN128-16AUR
✅ 直接替換📋 參考替代品(不在目錄中)
AT90CAN128-16AJ
✅ 直接替換聯絡詢價
查看資料表 →AT90CAN128-16AU
✅ 直接替換聯絡詢價
查看資料表 →AT90CAN128-16AI
✅ 直接替換聯絡詢價
查看資料表 →AT90CAN128-16AI 最大額定值與電氣特性
| Device Type | 8-bit RISC Flash Microcontroller |
| Architecture | AVR enhanced RISC |
| Maximum Clock Speed | 16 MHz |
| Program Flash Memory | 128 KB |
| Flash Programming | In-System Programmable with Read-While-Write |
| EEPROM | 4 KB |
| SRAM | 4 KB |
| General-Purpose I/O Lines | 53 |
| General-Purpose Working Registers | 32 |
| CAN Controller | CAN V2.0A and CAN V2.0B compliant |
| Timer/Counters | 4 with compare modes and PWM |
| USART Interfaces | 2 |
| Two-Wire Serial Interface | 1 byte-oriented interface |
| Real-Time Counter | 1 |
| Operating Voltage Range | 2.7 V to 5.5 V |
| 工作溫度範圍 | -40°C to +85°C |
| 封裝 | 64-TQFP, 14 mm x 14 mm |
| 安裝類型 | Surface Mount |
| Process Technology | Low-power CMOS |
AT90CAN128-16AI 64-tqfp, 14 mm x 14 mm 腳位配置指南
AT90CAN128-16AI(64-tqfp, 14 mm x 14 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: AT90CAN128-16AI.
請參閱 資料表 以查看完整腳位配置。
典型應用
AT90CAN128-16AI 適用於 6 應用s: Industrial CAN Automation Node, Automotive Body and Accessory Controller, CAN-Based Environmental Monitoring Unit, CAN Gateway and Protocol Bridge, Factory Equipment Service Interface, CAN-Based Lighting and Auxiliary Control.
Industrial CAN Automation Node
The AT90CAN128-16AI fits an industrial automation node that must control local I/O while exchanging real-time data over a CAN 2.0 network. Its 16 MHz AVR core supports approximately 1 MIPS throughput, while 53 I/O lines leave substantial capacity for sensors, discrete outputs, status indicators, and service connectors. The integrated CAN controller supports CAN V2.0A and V2.0B, removing the need for an external protocol controller. Place the device beside an external CAN transceiver, keep the bus path compact, and terminate the network at both physical ends. The 2.7 V to 5.5 V operating range also supports 3.3 V and 5 V industrial rails.
推薦
Automotive Body and Accessory Controller
The AT90CAN128-16AI can serve as a body or accessory controller when the vehicle network uses CAN 2.0 and the module requires multiple local I/O functions. Its four timer/counters provide compare and PWM outputs for valves, lamps, or motor-control assistance, while two USARTs support service diagnostics and external sensors. The CAN V2.0A and V2.0B controller integrates directly into the module architecture. Automotive implementations should use the appropriate qualified family variant and validate the exact ordering code against Microchip automotive data sheet doc7682.pdf, including temperature, transient, and qualification requirements.
推薦
CAN-Based Environmental Monitoring Unit
A remote environmental monitor benefits from the AT90CAN128-16AI's combination of 53 I/O lines and a networked CAN interface. Inputs can cover temperature, humidity, smoke, water-level, and analog sensor conditioning, while outputs control indicators or sampling relays. Four flexible timer/counters with PWM and compare modes support periodic sampling and local actuator timing, and the real-time counter provides an independent scheduling resource. Its 4 KB EEPROM can retain calibration values and node identifiers, while the 128 KB flash provides room for protocol handling, diagnostics, and a bootloader.
推薦
CAN Gateway and Protocol Bridge
The AT90CAN128-16AI is appropriate for a gateway that bridges a CAN 2.0 segment to another serial or embedded subsystem. Two USARTs can connect downstream equipment, while the byte-oriented two-wire interface supports sensors or configuration storage. The 4 KB SRAM is sufficient for protocol buffering in modest gateway designs, and the 128 KB flash allows protocol translation, filtering, diagnostics, and firmware update logic. Separate CAN transceiver circuitry is required because the MCU provides the digital controller, not the bus differential driver. Validate bit timing, error handling, and bus termination during integration testing.
推薦
Factory Equipment Service Interface
The AT90CAN128-16AI can implement a local service interface on industrial equipment while the machine's main controller continues to operate over CAN. The two USARTs support a technician console and an external service adapter, and the two-wire interface permits connection to a maintenance peripheral or configuration storage. Because the device provides 53 general-purpose I/O, it can also supervise door switches, emergency-stop status, indicators, and relay feedback. Use the two USARTs and CAN controller for interrupt-driven event handling, and keep service connectors away from high-current switching traces to reduce noise coupling.
推薦
CAN-Based Lighting and Auxiliary Control
The AT90CAN128-16AI can control lighting or auxiliary loads in an equipment network where a CAN master issues commands to distributed modules. Its PWM-capable timer/counters drive dimming, relays, or indicators, and its 53 I/O lines handle local switches and status feedback. The 16 MHz processing rate leaves headroom for command validation, debouncing, diagnostics, and communication error handling. For long cable runs or electrically noisy machinery, maintain a defined CAN network topology, use a qualified transceiver, route the bus away from motors, and verify common-mode voltage at the module interface.
推薦
推薦產品摘要
工程參考資料,適用於 AT90CAN128-16AI — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AT90CAN128-16AU | AT90CAN128-16AUR | AT90CAN128-16AJ | AT90CAN128-16A |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) |
| Clock Speed | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| EEPROM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| General-Purpose I/O | 53 lines | 53 lines | 53 lines | 53 lines | 53 lines |
| CAN Protocol Support | CAN V2.0A and CAN V2.0B | CAN V2.0A and CAN V2.0B | CAN V2.0A and CAN V2.0B | CAN V2.0A and CAN V2.0B | CAN V2.0A and CAN V2.0B |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Timer/Counters | 4 with compare and PWM modes | 4 with compare and PWM modes | 4 with compare and PWM modes | 4 with compare and PWM modes | 4 with compare and PWM modes |
主要差異化特點
- Integrated CAN controller eliminates an external protocol controller (對比ATMEGA128-16ANR)
- Large integrated memory supports standalone CAN nodes (對比AT90CAN64-16AU)
- Same-family ordering alternatives simplify second-source review (對比AT90CAN128-16AUR)
- Broad serial and timing resources cover more local functions (對比ATMEGA128-16ANR)
設計說明
The AT90CAN128 CAN_RX and CAN_TX signals are digital MCU signals and must connect to an external CAN transceiver rather than directly to a differential bus. Route the MCU-to-transceiver path as a short pair, keep the transceiver close to the connector, and place the bus termination only at the physical ends of the network. Avoid routing CAN traces alongside switching-power nodes, relay contacts, or motor drive outputs.
Operate the device within its 2.7 V to 5.5 V supply range and follow the decoupling configuration in the manufacturer family data sheet. Place low-ESR capacitors at the supply pins with short ground returns, and use a quiet ground-plane connection for the MCU and CAN transceiver. If a switching regulator supplies the rail, reserve filtering or an LDO for the transceiver and MCU section when conducted and radiated emissions become critical.
CAN bit timing depends on the selected clock source and oscillator tolerance. Use the clock configuration recommended for the board, account for temperature-dependent frequency variation, and verify the point-to-point delay budget with the transceiver and cable characteristics included. Validate the controller's sample point and propagation delay settings in the deployed bus, including bus loading, rather than relying only on a bench test with short cables.
Do not treat the AT90CAN128 and ATMEGA128 as firmware-compatible merely because both use the AVR architecture. Microchip application note AVR096 explains that their electrical characteristics differ and that a migration requires datasheet review. Preserve the exact 64-pin land pattern, verify CAN pin assignments, check reset and programming connections, and retest interrupt priorities, timing, and startup behavior after changing ordering codes or device families.
合規資訊
Microchip automotive data sheet doc7682.pdf states that the AT90CAN32, AT90CAN64, and AT90CAN128 family has undergone AEC-Q100 qualification. The AT90CAN128-16AI ordering code is an industrial-temperature configuration, so the automotive qualification must not be applied directly to this exact orderable variant.