AT91SAM7S16-AU - 55MHz ARM7 MCU with 16KB Flash | Microchip
MPN: AT91SAM7S16-AU ✓ NakahandaAT91SAM7S16-AU Ulas
An ARM7-based microcontroller is a 32-bit RISC system-on-chip designed for embedded control rather than general-purpose computing. The AT91SAM7S series integrates a processor, fast Flash, SRAM, interrupt control, timers, communication interfaces, and analog conversion functions. This integration reduces the component count of an embedded board while providing deterministic interrupt handling and dedicated hardware peripherals.
Key features include a 55 MHz ARM7TDMI core, 16 KB Flash organized as 16K x 8, 4 KB of SRAM, USB 2.0 device support, USART, SPI, SSC, and TWI serial interfaces, and an 8-channel 10-bit ADC. The microcontroller is designed for real-time applications in which USB connectivity, mixed-signal measurement, and deterministic peripheral operation are important.
The architecture includes a banked Flash organization for instruction execution and a direct-memory-access controller for efficient data movement. Programmable interrupt controllers prioritize real-time events, while the timer and communication blocks reduce the processing burden on the CPU. Its 1.65 V to 1.95 V operating supply suits low-voltage embedded systems requiring deterministic operation from a regulated rail.
Typical applications include USB-connected industrial controls, compact data-acquisition terminals, HMI controllers, embedded test equipment, and cost-sensitive consumer products. The 48-LQFP package also makes the device suitable for multilayer boards that cannot use very fine-pitch packages.
When laying out a design, place the decoupling capacitors close to the supply pins and route sensitive analog inputs away from high-current switching nodes. Confirm USB transceiver, clock, and I/O voltage requirements against the manufacturer datasheet before releasing the PCB, particularly when the MCU operates from a 1.8 V core rail.
This page consolidates device specifications, package details, sourcing guidance, design notes, and verified drop-in information to support faster component selection and hardware planning.
Mga alternatibo na pwedeng ilagay na AT91SAM7S16-AU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
AT91SAM7S16-AU-001
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AT91SAM7S16-AU Mga Pinakamataas na Rating at Electrical Characteristics
| Processor Core | ARM7TDMI 32-bit RISC |
| Maximum CPU Frequency | 55 MHz |
| Program Memory | 16 KB Flash (16K x 8) |
| SRAM | 4 KB |
| Architecture | 16/32-bit ARM |
| Core Supply Voltage | 1.65 V to 1.95 V |
| USB Interface | USB 2.0 device |
| ADC Resolution | 10-bit |
| ADC Channels | 8 channels |
| UART Interface | USART |
| Serial Interface | SPI |
| Synchronous Serial Interface | SSC |
| Two-Wire Interface | TWI |
| Packhaging | 48-LQFP (7 x 7 mm) |
| Terminal Count | 48 terminals |
| Uri ng Pagpapasok | Surface mount |
| Temperature Grade | Industrial |
Gabay sa Pin Configuration ng AT91SAM7S16-AU 48-lqfp (7 x 7 mm)
Pin configuration para sa AT91SAM7S16-AU (48-lqfp (7 x 7 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa AT91SAM7S16-AU.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AT91SAM7S16-AU ay nararapat para sa 6 aplikasyons: USB-Connected Industrial Control, Compact Data-Acquisition Terminal, Embedded Human-Machine Interface Controller, Cost-Sensitive Consumer Peripheral, Real-Time Sensor and Actuator Hub, Embedded Test and Measurement Front End.
USB-Connected Industrial Control
The AT91SAM7S16-AU fits compact control panels and USB-connected industrial modules that need deterministic processing without a separate interface controller. Its ARM7TDMI core runs at up to 55 MHz, while USB 2.0 device support provides a direct connection to a host system. Use USART or SPI for local sensors and the TWI interface for configuration devices, while the 4 KB SRAM supports buffering and real-time state updates. A 48-LQFP 7 x 7 mm package also keeps the design compact enough for dense control assemblies.
Inirekomenda
Compact Data-Acquisition Terminal
The AT91SAM7S16-AU is suitable for a compact acquisition terminal with several analog inputs and upstream digital connectivity. Its 8-channel, 10-bit ADC supports monitoring of pressure, temperature, potentiometer, or process-control signals, while the 55 MHz ARM7TDMI core can filter and packetize measurements. USART, SPI, SSC, and TWI provide options for local sensors and configuration storage. The 16 KB Flash and 4 KB SRAM require disciplined firmware sizing, making the device best for short control loops and targeted logging rather than large local data histories.
Inirekomenda
Embedded Human-Machine Interface Controller
The AT91SAM7S16-AU can control a small graphical or keypad-based human-machine interface while managing real-time background tasks. Its 55 MHz ARM7TDMI performance provides sufficient headroom for display updates, menu logic, and communication handling, while USB 2.0 device connectivity simplifies commissioning and configuration over a PC. USART and SPI can connect a display controller or touch interface, and the TWI peripheral supports low-speed configuration devices. The 4 KB SRAM is modest, so graphics buffering should remain shallow or external.
Inirekomenda
Cost-Sensitive Consumer Peripheral
The AT91SAM7S16-AU offers a practical integration level for cost-sensitive peripherals that combine USB connectivity with general embedded control. A single 48-LQFP device replaces separate logic for USB communication, serial control, and analog measurement. The 55 MHz ARM7TDMI core can manage protocol handling and user interactions, and the flash-based architecture supports field updates. Its 16 KB Flash and 4 KB SRAM suit compact firmware with tightly scoped functionality, such as configuration tools, simple accessories, and basic device controllers.
Inirekomenda
Real-Time Sensor and Actuator Hub
The AT91SAM7S16-AU works well as the central controller in a real-time sensor and actuator hub because its dedicated timers, interrupts, DMA controller, and serial peripherals offload time-sensitive operations from the CPU. The 8-channel 10-bit ADC can monitor several analog inputs, USART and SPI can connect remote sensors, and TWI can handle low-speed configuration peripherals. Operating at up to 55 MHz, the MCU can execute deterministic control loops while keeping the design within a single 48-LQFP 7 x 7 mm package.
Inirekomenda
Embedded Test and Measurement Front End
The AT91SAM7S16-AU can serve as the control front end for a compact test or measurement instrument that requires control logic alongside a few analog channels. The 10-bit ADC handles coarse process-variable monitoring, while USB 2.0 device connectivity provides data transfer to a host computer. SPI and USART can connect a precision converter or external instrumentation, and the ARM7TDMI core can coordinate sequences and results. Because Flash and SRAM are limited to 16 KB and 4 KB respectively, intensive waveform storage belongs in external memory.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AT91SAM7S16-AU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AT91SAM7S16-AU-001 |
|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Processor Core | ARM7TDMI 32-bit RISC | ARM7TDMI 32-bit RISC |
| Maximum CPU Frequency | 55 MHz | 55 MHz |
| Flash Memory | 16 KB (16K x 8) | 16 KB |
| SRAM | 4 KB | 4 KB |
| Core Supply Voltage | 1.65 V to 1.95 V | 1.65 V to 1.95 V |
| USB Interface | USB 2.0 device | USB 2.0 device |
| ADC | 8-channel, 10-bit | 8-channel, 10-bit |
| Temperature Grade | Industrial | Industrial |
Pangunahing mga Pagkakaiba
- Closest drop-in ordering alternative (kumpara saAT91SAM7S16-AU-001)
- Integrated real-time peripheral set (kumpara saAT91SAM7S16-AU-001)
- ARM7 software compatibility for installed designs (kumpara saSTM32F042C4T6)
Talaan ng Disenyo
The AT91SAM7S16-AU operates from a 1.65 V to 1.95 V core supply. Place the manufacturer-recommended bypass capacitors immediately across the corresponding supply and ground pins, with the shortest possible return paths. Check the absolute maximum and operating voltage limits of the USB transceiver, external memories, and sensors separately because mixed-voltage systems require level translation or compatible interface devices.
Use the 48-LQFP 7 x 7 mm land pattern defined by the package drawing and route sensitive analog inputs away from USB, clock, and switching-current paths. The ADC inputs should use short traces, a continuous ground reference, and protection appropriate to the measured signal range. Because several pins support alternate peripheral functions, finalize the peripheral-versus-GPIO allocation before routing the board.
Implement USB routing as a controlled-impedance interface and keep the USB data connection away from analog inputs and high-edge-rate signals. Follow the manufacturer reference layout for USB data, D+ or D-, and the clock source. Series damping and additional filtering should be evaluated with an oscilloscope rather than added indiscriminately, since excessive filtering can impair USB signal integrity.
Do not assume that a same-package Cortex-M controller is firmware-compatible with the ARM7TDMI architecture. Exception handling, interrupt priorities, peripheral registers, startup code, and pin multiplexing differ substantially. The AT91SAM7S16-AU-001 is the closest identified ordering alternative because it preserves the same architecture and footprint; validate its production suffix and temperature configuration before substitution.
Impormasyon ng Pagsunod sa Kautusan
The device is identified as an industrial-grade 48-terminal LQFP microcontroller. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration of compliance.