Microchip Technology

AT91SAM7S16-AU - 55MHz ARM7 MCU with 16KB Flash | Microchip

부품 번호: AT91SAM7S16-AU ✓ 활성
1.65 V to 1.95 V Vdss 48-LQFP (7 x 7 mm) Package 55 MHz Speed 16 KB Flash (16K x 8) Memory
MOQ: 1 |

AT91SAM7S16-AU 개요

The Microchip Technology AT91SAM7S16-AU is a 32-bit ARM7TDMI microcontroller operating at up to 55 MHz, with 16 KB of on-chip Flash memory and 4 KB of SRAM in a 48-LQFP 7 x 7 mm package. The device combines a 1.65 V to 1.95 V core supply with an extensive set of real-time peripherals for embedded control, data acquisition, and USB-connected equipment.

An ARM7-based microcontroller is a 32-bit RISC system-on-chip designed for embedded control rather than general-purpose computing. The AT91SAM7S series integrates a processor, fast Flash, SRAM, interrupt control, timers, communication interfaces, and analog conversion functions. This integration reduces the component count of an embedded board while providing deterministic interrupt handling and dedicated hardware peripherals.

Key features include a 55 MHz ARM7TDMI core, 16 KB Flash organized as 16K x 8, 4 KB of SRAM, USB 2.0 device support, USART, SPI, SSC, and TWI serial interfaces, and an 8-channel 10-bit ADC. The microcontroller is designed for real-time applications in which USB connectivity, mixed-signal measurement, and deterministic peripheral operation are important.

The architecture includes a banked Flash organization for instruction execution and a direct-memory-access controller for efficient data movement. Programmable interrupt controllers prioritize real-time events, while the timer and communication blocks reduce the processing burden on the CPU. Its 1.65 V to 1.95 V operating supply suits low-voltage embedded systems requiring deterministic operation from a regulated rail.

Typical applications include USB-connected industrial controls, compact data-acquisition terminals, HMI controllers, embedded test equipment, and cost-sensitive consumer products. The 48-LQFP package also makes the device suitable for multilayer boards that cannot use very fine-pitch packages.

When laying out a design, place the decoupling capacitors close to the supply pins and route sensitive analog inputs away from high-current switching nodes. Confirm USB transceiver, clock, and I/O voltage requirements against the manufacturer datasheet before releasing the PCB, particularly when the MCU operates from a 1.8 V core rail.

This page consolidates device specifications, package details, sourcing guidance, design notes, and verified drop-in information to support faster component selection and hardware planning.

드롭인 대체품: AT91SAM7S16-AU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

AT91SAM7S16-AU-001

✅ 드롭인
📦 48-LQFP (7 x 7 mm)
Same ARM7TDMI core, 55 MHz rating, 16 KB Flash, 4 KB SRAM, and 48-LQFP footprint; ordering suffix identifies the industrial-temperature variant

📋 참조 대체품 (카탈로그에 없음)

AT91SAM7S16-AU 최대 정격 & 전기적 특성

Processor Core ARM7TDMI 32-bit RISC
Maximum CPU Frequency 55 MHz
Program Memory 16 KB Flash (16K x 8)
SRAM 4 KB
Architecture 16/32-bit ARM
Core Supply Voltage 1.65 V to 1.95 V
USB Interface USB 2.0 device
ADC Resolution 10-bit
ADC Channels 8 channels
UART Interface USART
Serial Interface SPI
Synchronous Serial Interface SSC
Two-Wire Interface TWI
패키지 48-LQFP (7 x 7 mm)
Terminal Count 48 terminals
실장 유형 Surface mount
Temperature Grade Industrial

AT91SAM7S16-AU 48-lqfp (7 x 7 mm) 핀 구성 가이드

AT91SAM7S16-AU(48-lqfp (7 x 7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

AT91SAM7S16-AU의 48-lqfp (7 x 7 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AT91SAM7S16-AU.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AT91SAM7S16-AU 적합 용도: 6 애플리케이션s: USB-Connected Industrial Control, Compact Data-Acquisition Terminal, Embedded Human-Machine Interface Controller, Cost-Sensitive Consumer Peripheral, Real-Time Sensor and Actuator Hub, Embedded Test and Measurement Front End.

🏭

USB-Connected Industrial Control

The AT91SAM7S16-AU fits compact control panels and USB-connected industrial modules that need deterministic processing without a separate interface controller. Its ARM7TDMI core runs at up to 55 MHz, while USB 2.0 device support provides a direct connection to a host system. Use USART or SPI for local sensors and the TWI interface for configuration devices, while the 4 KB SRAM supports buffering and real-time state updates. A 48-LQFP 7 x 7 mm package also keeps the design compact enough for dense control assemblies.

📡

Compact Data-Acquisition Terminal

The AT91SAM7S16-AU is suitable for a compact acquisition terminal with several analog inputs and upstream digital connectivity. Its 8-channel, 10-bit ADC supports monitoring of pressure, temperature, potentiometer, or process-control signals, while the 55 MHz ARM7TDMI core can filter and packetize measurements. USART, SPI, SSC, and TWI provide options for local sensors and configuration storage. The 16 KB Flash and 4 KB SRAM require disciplined firmware sizing, making the device best for short control loops and targeted logging rather than large local data histories.

📺

Embedded Human-Machine Interface Controller

The AT91SAM7S16-AU can control a small graphical or keypad-based human-machine interface while managing real-time background tasks. Its 55 MHz ARM7TDMI performance provides sufficient headroom for display updates, menu logic, and communication handling, while USB 2.0 device connectivity simplifies commissioning and configuration over a PC. USART and SPI can connect a display controller or touch interface, and the TWI peripheral supports low-speed configuration devices. The 4 KB SRAM is modest, so graphics buffering should remain shallow or external.

🔧

Cost-Sensitive Consumer Peripheral

The AT91SAM7S16-AU offers a practical integration level for cost-sensitive peripherals that combine USB connectivity with general embedded control. A single 48-LQFP device replaces separate logic for USB communication, serial control, and analog measurement. The 55 MHz ARM7TDMI core can manage protocol handling and user interactions, and the flash-based architecture supports field updates. Its 16 KB Flash and 4 KB SRAM suit compact firmware with tightly scoped functionality, such as configuration tools, simple accessories, and basic device controllers.

🧩

Real-Time Sensor and Actuator Hub

The AT91SAM7S16-AU works well as the central controller in a real-time sensor and actuator hub because its dedicated timers, interrupts, DMA controller, and serial peripherals offload time-sensitive operations from the CPU. The 8-channel 10-bit ADC can monitor several analog inputs, USART and SPI can connect remote sensors, and TWI can handle low-speed configuration peripherals. Operating at up to 55 MHz, the MCU can execute deterministic control loops while keeping the design within a single 48-LQFP 7 x 7 mm package.

🖥️

Embedded Test and Measurement Front End

The AT91SAM7S16-AU can serve as the control front end for a compact test or measurement instrument that requires control logic alongside a few analog channels. The 10-bit ADC handles coarse process-variable monitoring, while USB 2.0 device connectivity provides data transfer to a host computer. SPI and USART can connect a precision converter or external instrumentation, and the ARM7TDMI core can coordinate sequences and results. Because Flash and SRAM are limited to 16 KB and 4 KB respectively, intensive waveform storage belongs in external memory.

추천 제품 요약

AT91SAM7S16-AU Microchip Technology 사용처: USB-Connected Industrial Control, Compact Data-Acquisition Terminal, Embedded Human-Machine Interface Controller, Cost-Sensitive Consumer Peripheral, Real-Time Sensor and Actuator Hub, Embedded Test and Measurement Front End AT91SAM7S16-AU-001 Industrial-temperature ordering alternative 사용처: USB-Connected Industrial Control, Compact Data-Acquisition Terminal, Embedded Human-Machine Interface Controller, Cost-Sensitive Consumer Peripheral, Real-Time Sensor and Actuator Hub, Embedded Test and Measurement Front End
What are the key specifications of AT91SAM7S16-AU that engineers should know?
The AT91SAM7S16-AU is a 55 MHz, 32-bit ARM7TDMI microcontroller with 16 KB of Flash memory, 4 KB of SRAM, and USB 2.0 device connectivity in a 48-LQFP 7 x 7 mm package. According to the manufacturer datasheet, it also includes USART, SPI, SSC, TWI, and an 8-channel 10-bit ADC. The 1.65 V to 1.95 V core supply and extensive peripheral integration make it a practical choice for compact real-time control, data-acquisition, and USB-connected products.
What is the AT91SAM7S16-AU and what type of microcontroller is it?
The AT91SAM7S16-AU is an ARM7-based 32-bit RISC flash microcontroller from the SAM7S family. It integrates an ARM7TDMI processor, 16 KB of on-chip Flash, 4 KB of SRAM, USB 2.0 device support, serial peripherals, timers, and an ADC. According to the manufacturer datasheet, its maximum operating frequency is 55 MHz. It is intended for embedded systems requiring deterministic real-time behavior, several communication interfaces, and USB connectivity in a 48-LQFP package.
How much Flash and SRAM does the AT91SAM7S16-AU have?
The AT91SAM7S16-AU provides 16 KB of Flash memory organized as 16K x 8 and 4 KB of SRAM. According to the manufacturer datasheet, the flash supports in-system programming, while the SRAM is available for working data, stack, and peripheral buffers. These memory sizes are suitable for compact control firmware, communication stacks, and moderate data processing, but they are substantially smaller than those found in current high-density Cortex-M microcontrollers.
What is the maximum operating frequency of AT91SAM7S16-AU?
The maximum CPU frequency of the AT91SAM7S16-AU is 55 MHz. According to the manufacturer datasheet, this is the operating speed of its ARM7TDMI 32-bit RISC core. The MCU also includes dedicated hardware for timers, interrupts, DMA, USB, and serial communication, allowing the processor to remain responsive without implementing every peripheral function in software. Clock generation and power-management settings should be configured using the procedures in the manufacturer datasheet.
Which peripherals and interfaces are built into AT91SAM7S16-AU?
The AT91SAM7S16-AU integrates USB 2.0 device, USART, SPI, SSC, TWI, and an 8-channel 10-bit ADC. According to the manufacturer datasheet, the peripheral set also supports real-time control through interrupt controllers, timers, and a DMA controller. This combination lets one device handle low-speed USB connectivity, sensor acquisition, communications with external transceivers, and deterministic control tasks without requiring several separate interface chips.
What is the supply voltage range of AT91SAM7S16-AU?
The AT91SAM7S16-AU operates from a 1.65 V to 1.95 V core supply. According to the manufacturer datasheet, the permitted supply is centered on a nominal 1.8 V operating point. Supply the device from a stable regulated rail and use the decoupling network specified by the manufacturer. Verify the voltage limits of connected USB transceivers, memory, and sensors independently because their operating ranges may differ from the MCU core supply.
Where can I download the AT91SAM7S16-AU datasheet PDF?
The AT91SAM7S16-AU datasheet PDF is available from the Microchip device-document link listed on this page, which points to the SAM7S family document. Use the family document to review the ARM7TDMI core, memory map, Flash organization, interrupt controller, peripheral registers, electrical characteristics, and package information. Also consult the individual product-page documentation for ordering information and the exact AT91SAM7S16-AU configuration.
Where can I find the AT91SAM7S16-AU pinout and package details?
The AT91SAM7S16-AU uses a 48-LQFP package measuring 7 x 7 mm. The manufacturer SAM7S family document contains the package drawings, pin-description table, and signal multiplexing information needed to assign PCB nets. Because several peripheral functions share the same pads, confirm the peripheral mode and alternate-function selection in the datasheet before finalizing signal routing. The device is surface mounted and requires a land pattern matching the 48-lead LQFP footprint.
What is the best drop-in replacement for AT91SAM7S16-AU?
The closest identified drop-in alternative is the AT91SAM7S16-AU-001, which uses the same 48-LQFP package and the same ARM7TDMI, 55 MHz, 16 KB Flash, and 4 KB SRAM configuration. According to the manufacturer documentation, the -001 ordering code identifies the industrial-temperature variant. Before substitution, verify the suffix, temperature grade, pin multiplexing, and supply conditions in the datasheet because package code ordering conventions can vary within a device family.
Can AT91SAM7S16-AU-001 replace AT91SAM7S16-AU in an existing design?
The AT91SAM7S16-AU-001 can serve as a drop-in alternative to the AT91SAM7S16-AU when the target assembly requires the industrial-temperature ordering option. Both are identified as 48-terminal, square, gull-wing LQFP devices with a 7 x 7 mm package and the same SAM7S16 architecture. Validate the exact ordering suffix, temperature grade, and production configuration against the manufacturer documentation before treating the substitution as final.
When should I choose AT91SAM7S16-AU instead of a Cortex-M replacement?
Choose the AT91SAM7S16-AU when maintaining an existing ARM7 design, using the SAM7S USB and peripheral ecosystem, or avoiding an application-code and PCB requalification is more important than using a newer processor core. The device provides 55 MHz performance with 16 KB Flash and 4 KB SRAM. A Cortex-M alternative may require different software startup, interrupt handling, peripherals, and possibly a different pin arrangement, so it should be treated as a redesign unless formal compatibility has been established.
Is AT91SAM7S16-AU suitable for industrial data acquisition and control systems?
The AT91SAM7S16-AU is suitable for compact real-time control and data-acquisition designs that need an 8-channel 10-bit ADC, USB connectivity, and multiple serial interfaces in one package. According to the manufacturer datasheet, the device provides an industrial-temperature ordering option and operates at up to 55 MHz. Validate analog accuracy, input impedance, USB implementation, and environmental requirements during prototype testing before releasing a production design.
What can replace AT91SAM7S16-AU when the original part is unavailable?
The AT91SAM7S16-AU-001 is the most direct replacement because it retains the 48-LQFP 7 x 7 mm footprint, ARM7TDMI processor, 55 MHz operating frequency, 16 KB Flash, and 4 KB SRAM. A different-architecture microcontroller in the same package should not be treated as a drop-in replacement: ARM7TDMI and Cortex-M devices differ in exception handling, startup code, interrupt architecture, and many peripheral assignments. Use the Request a Quote form on this page to check availability of the target and its closest ordering variant.
Is STM32F042C4T6 a drop-in replacement for AT91SAM7S16-AU?
The STM32F042C4T6 is a same-size 48-LQFP alternative with 16 KB of Flash, but it is not a verified pin-to-pin drop-in replacement for the AT91SAM7S16-AU. It uses a Cortex-M3 core rather than ARM7TDMI, operates at a different maximum frequency, and has a different register, interrupt, and peripheral architecture. Existing firmware therefore requires porting and the PCB signal assignments require review. The cross-reference information only supports a same-package comparison, not unconditional drop-in use.
Where can I buy AT91SAM7S16-AU online and what is its lead time?
Use the Request a Quote form on this page to request current AT91SAM7S16-AU pricing, stock status, and lead time directly from XAIPART. The device is listed by Microchip Technology and is available through authorized distribution channels, but commercial terms can change with inventory and sourcing conditions. Provide the required quantity, target date, and packaging preference in the request so the quote can reflect the appropriate configuration and schedule.

엔지니어링 참조 데이터: AT91SAM7S16-AU — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AT91SAM7S16-AU for new 48-LQFP real-time designs that require USB 2.0 device connectivity, several serial interfaces, and an 8-channel 10-bit ADC in a single MCU. Its 55 MHz ARM7TDMI core, 16 KB Flash, and 4 KB SRAM are appropriate for focused control firmware with limited local data storage. The AT91SAM7S16-AU-001 is the preferred alternative when the same architecture, footprint, memory, and peripheral configuration must be retained with the industrial-temperature ordering option. Avoid treating the STM32F042C4T6 as a drop-in part even though it also uses a 48-LQFP package and 16 KB Flash: the Cortex-M3 core, startup model, interrupt system, registers, and pin functions differ, making that choice a board and firmware redesign rather than a substitution.

대체품과의 비교

파라미터 이 제품 AT91SAM7S16-AU-001
Package 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm)
Brand Microchip Technology Microchip Technology
Processor Core ARM7TDMI 32-bit RISC ARM7TDMI 32-bit RISC
Maximum CPU Frequency 55 MHz 55 MHz
Flash Memory 16 KB (16K x 8) 16 KB
SRAM 4 KB 4 KB
Core Supply Voltage 1.65 V to 1.95 V 1.65 V to 1.95 V
USB Interface USB 2.0 device USB 2.0 device
ADC 8-channel, 10-bit 8-channel, 10-bit
Temperature Grade Industrial Industrial

주요 차별점

  • Closest drop-in ordering alternative (vs AT91SAM7S16-AU-001)
  • Integrated real-time peripheral set (vs AT91SAM7S16-AU-001)
  • ARM7 software compatibility for installed designs (vs STM32F042C4T6)

설계 노트

The AT91SAM7S16-AU operates from a 1.65 V to 1.95 V core supply. Place the manufacturer-recommended bypass capacitors immediately across the corresponding supply and ground pins, with the shortest possible return paths. Check the absolute maximum and operating voltage limits of the USB transceiver, external memories, and sensors separately because mixed-voltage systems require level translation or compatible interface devices.

Use the 48-LQFP 7 x 7 mm land pattern defined by the package drawing and route sensitive analog inputs away from USB, clock, and switching-current paths. The ADC inputs should use short traces, a continuous ground reference, and protection appropriate to the measured signal range. Because several pins support alternate peripheral functions, finalize the peripheral-versus-GPIO allocation before routing the board.

Implement USB routing as a controlled-impedance interface and keep the USB data connection away from analog inputs and high-edge-rate signals. Follow the manufacturer reference layout for USB data, D+ or D-, and the clock source. Series damping and additional filtering should be evaluated with an oscilloscope rather than added indiscriminately, since excessive filtering can impair USB signal integrity.

Do not assume that a same-package Cortex-M controller is firmware-compatible with the ARM7TDMI architecture. Exception handling, interrupt priorities, peripheral registers, startup code, and pin multiplexing differ substantially. The AT91SAM7S16-AU-001 is the closest identified ordering alternative because it preserves the same architecture and footprint; validate its production suffix and temperature configuration before substitution.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The device is identified as an industrial-grade 48-terminal LQFP microcontroller. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration of compliance.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AT91SAM7S16-AU AT91SAM7S16 datasheet AT91SAM7S16 datasheet pdf AT91SAM7S16-AU pinout AT91SAM7S16 48 LQFP Microchip AT91SAM7S16-AU AT91SAM7S16-AU specifications AT91SAM7S16 55MHz ARM7TDMI AT91SAM7S16 USB application circuit AT91SAM7S16-AU equivalent AT91SAM7S16-AU replacement AT91SAM7S16-AU vs STM32F042C4T6 AT91SAM7S16-AU price AT91SAM7S16-AU stock what replaces AT91SAM7S16-AU

관련 부품 & 용어

Microchip Technology Atmel AT91SAM7S16-AU AT91SAM7S16-AU-001 STM32F042C4T6 ARM7TDMI 32-bit RISC microcontroller microcontroller embedded controller system-on-chip 16 KB Flash memory 4 KB SRAM 55 MHz USB 2.0 device USART SPI SSC TWI 8-channel 10-bit ADC DMA controller 48-LQFP 7 x 7 mm LQFP package surface-mount package industrial temperature grade real-time embedded control
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기