AT91SAM7S16-AU - 55MHz ARM7 MCU with 16KB Flash | Microchip
料号: AT91SAM7S16-AU ✓ 量产中AT91SAM7S16-AU 概述
An ARM7-based microcontroller is a 32-bit RISC system-on-chip designed for embedded control rather than general-purpose computing. The AT91SAM7S series integrates a processor, fast Flash, SRAM, interrupt control, timers, communication interfaces, and analog conversion functions. This integration reduces the component count of an embedded board while providing deterministic interrupt handling and dedicated hardware peripherals.
Key features include a 55 MHz ARM7TDMI core, 16 KB Flash organized as 16K x 8, 4 KB of SRAM, USB 2.0 device support, USART, SPI, SSC, and TWI serial interfaces, and an 8-channel 10-bit ADC. The microcontroller is designed for real-time applications in which USB connectivity, mixed-signal measurement, and deterministic peripheral operation are important.
The architecture includes a banked Flash organization for instruction execution and a direct-memory-access controller for efficient data movement. Programmable interrupt controllers prioritize real-time events, while the timer and communication blocks reduce the processing burden on the CPU. Its 1.65 V to 1.95 V operating supply suits low-voltage embedded systems requiring deterministic operation from a regulated rail.
Typical applications include USB-connected industrial controls, compact data-acquisition terminals, HMI controllers, embedded test equipment, and cost-sensitive consumer products. The 48-LQFP package also makes the device suitable for multilayer boards that cannot use very fine-pitch packages.
When laying out a design, place the decoupling capacitors close to the supply pins and route sensitive analog inputs away from high-current switching nodes. Confirm USB transceiver, clock, and I/O voltage requirements against the manufacturer datasheet before releasing the PCB, particularly when the MCU operates from a 1.8 V core rail.
This page consolidates device specifications, package details, sourcing guidance, design notes, and verified drop-in information to support faster component selection and hardware planning.
直接替换替代料: AT91SAM7S16-AU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AT91SAM7S16-AU-001
✅ 直接替换📋 参考替代料(不在目录中)
AT91SAM7S16-AU 最大额定值与电气特性
| Processor Core | ARM7TDMI 32-bit RISC |
| Maximum CPU Frequency | 55 MHz |
| Program Memory | 16 KB Flash (16K x 8) |
| SRAM | 4 KB |
| Architecture | 16/32-bit ARM |
| Core Supply Voltage | 1.65 V to 1.95 V |
| USB Interface | USB 2.0 device |
| ADC Resolution | 10-bit |
| ADC Channels | 8 channels |
| UART Interface | USART |
| Serial Interface | SPI |
| Synchronous Serial Interface | SSC |
| Two-Wire Interface | TWI |
| 封装 | 48-LQFP (7 x 7 mm) |
| Terminal Count | 48 terminals |
| 安装类型 | Surface mount |
| Temperature Grade | Industrial |
AT91SAM7S16-AU 48-lqfp (7 x 7 mm) 引脚配置指南
AT91SAM7S16-AU(48-lqfp (7 x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: AT91SAM7S16-AU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AT91SAM7S16-AU 适用于 6 应用s: USB-Connected Industrial Control, Compact Data-Acquisition Terminal, Embedded Human-Machine Interface Controller, Cost-Sensitive Consumer Peripheral, Real-Time Sensor and Actuator Hub, Embedded Test and Measurement Front End.
USB-Connected Industrial Control
The AT91SAM7S16-AU fits compact control panels and USB-connected industrial modules that need deterministic processing without a separate interface controller. Its ARM7TDMI core runs at up to 55 MHz, while USB 2.0 device support provides a direct connection to a host system. Use USART or SPI for local sensors and the TWI interface for configuration devices, while the 4 KB SRAM supports buffering and real-time state updates. A 48-LQFP 7 x 7 mm package also keeps the design compact enough for dense control assemblies.
推荐
Compact Data-Acquisition Terminal
The AT91SAM7S16-AU is suitable for a compact acquisition terminal with several analog inputs and upstream digital connectivity. Its 8-channel, 10-bit ADC supports monitoring of pressure, temperature, potentiometer, or process-control signals, while the 55 MHz ARM7TDMI core can filter and packetize measurements. USART, SPI, SSC, and TWI provide options for local sensors and configuration storage. The 16 KB Flash and 4 KB SRAM require disciplined firmware sizing, making the device best for short control loops and targeted logging rather than large local data histories.
推荐
Embedded Human-Machine Interface Controller
The AT91SAM7S16-AU can control a small graphical or keypad-based human-machine interface while managing real-time background tasks. Its 55 MHz ARM7TDMI performance provides sufficient headroom for display updates, menu logic, and communication handling, while USB 2.0 device connectivity simplifies commissioning and configuration over a PC. USART and SPI can connect a display controller or touch interface, and the TWI peripheral supports low-speed configuration devices. The 4 KB SRAM is modest, so graphics buffering should remain shallow or external.
推荐
Cost-Sensitive Consumer Peripheral
The AT91SAM7S16-AU offers a practical integration level for cost-sensitive peripherals that combine USB connectivity with general embedded control. A single 48-LQFP device replaces separate logic for USB communication, serial control, and analog measurement. The 55 MHz ARM7TDMI core can manage protocol handling and user interactions, and the flash-based architecture supports field updates. Its 16 KB Flash and 4 KB SRAM suit compact firmware with tightly scoped functionality, such as configuration tools, simple accessories, and basic device controllers.
推荐
Real-Time Sensor and Actuator Hub
The AT91SAM7S16-AU works well as the central controller in a real-time sensor and actuator hub because its dedicated timers, interrupts, DMA controller, and serial peripherals offload time-sensitive operations from the CPU. The 8-channel 10-bit ADC can monitor several analog inputs, USART and SPI can connect remote sensors, and TWI can handle low-speed configuration peripherals. Operating at up to 55 MHz, the MCU can execute deterministic control loops while keeping the design within a single 48-LQFP 7 x 7 mm package.
推荐
Embedded Test and Measurement Front End
The AT91SAM7S16-AU can serve as the control front end for a compact test or measurement instrument that requires control logic alongside a few analog channels. The 10-bit ADC handles coarse process-variable monitoring, while USB 2.0 device connectivity provides data transfer to a host computer. SPI and USART can connect a precision converter or external instrumentation, and the ARM7TDMI core can coordinate sequences and results. Because Flash and SRAM are limited to 16 KB and 4 KB respectively, intensive waveform storage belongs in external memory.
推荐
推荐产品汇总
工程参考数据: AT91SAM7S16-AU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AT91SAM7S16-AU-001 |
|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Processor Core | ARM7TDMI 32-bit RISC | ARM7TDMI 32-bit RISC |
| Maximum CPU Frequency | 55 MHz | 55 MHz |
| Flash Memory | 16 KB (16K x 8) | 16 KB |
| SRAM | 4 KB | 4 KB |
| Core Supply Voltage | 1.65 V to 1.95 V | 1.65 V to 1.95 V |
| USB Interface | USB 2.0 device | USB 2.0 device |
| ADC | 8-channel, 10-bit | 8-channel, 10-bit |
| Temperature Grade | Industrial | Industrial |
关键差异点
- Closest drop-in ordering alternative (对比 AT91SAM7S16-AU-001)
- Integrated real-time peripheral set (对比 AT91SAM7S16-AU-001)
- ARM7 software compatibility for installed designs (对比 STM32F042C4T6)
设计说明
The AT91SAM7S16-AU operates from a 1.65 V to 1.95 V core supply. Place the manufacturer-recommended bypass capacitors immediately across the corresponding supply and ground pins, with the shortest possible return paths. Check the absolute maximum and operating voltage limits of the USB transceiver, external memories, and sensors separately because mixed-voltage systems require level translation or compatible interface devices.
Use the 48-LQFP 7 x 7 mm land pattern defined by the package drawing and route sensitive analog inputs away from USB, clock, and switching-current paths. The ADC inputs should use short traces, a continuous ground reference, and protection appropriate to the measured signal range. Because several pins support alternate peripheral functions, finalize the peripheral-versus-GPIO allocation before routing the board.
Implement USB routing as a controlled-impedance interface and keep the USB data connection away from analog inputs and high-edge-rate signals. Follow the manufacturer reference layout for USB data, D+ or D-, and the clock source. Series damping and additional filtering should be evaluated with an oscilloscope rather than added indiscriminately, since excessive filtering can impair USB signal integrity.
Do not assume that a same-package Cortex-M controller is firmware-compatible with the ARM7TDMI architecture. Exception handling, interrupt priorities, peripheral registers, startup code, and pin multiplexing differ substantially. The AT91SAM7S16-AU-001 is the closest identified ordering alternative because it preserves the same architecture and footprint; validate its production suffix and temperature configuration before substitution.
合规信息
The device is identified as an industrial-grade 48-terminal LQFP microcontroller. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration of compliance.