Microchip Technology

ATTINY461A-MU - 20MHz 8-Bit AVR MCU, 4KB Flash | Microchip

MPN: ATTINY461A-MU ✓ Nakahanda
32-VQFN (5 x 5 mm) Package 20 MHz Speed 4 KB (2K x 16) Memory
MOQ: 1 |

ATTINY461A-MU Ulas

The Microchip Technology ATTINY461A-MU is a 20 MHz, 8-bit AVR RISC-based microcontroller with 4 KB Flash memory, 256 B EEPROM, 256 B SRAM, and 16 general-purpose I/O lines in a 32-VQFN 5 x 5 mm package. Its combination of a compact surface-mount footprint, dedicated 10-bit ADC, four PWM channels, and 16 I/O pins suits compact embedded control, sensing, and actuator systems.

An 8-bit AVR microcontroller is an integrated circuit containing a RISC-based processor core, program memory, data EEPROM, SRAM, timers, serial interfaces, and analog peripherals on one device. Within the embedded-control hierarchy, it belongs to the Microchip ATtiny family of low-power, resource-constrained microcontrollers. The ATTINY461A combines that architecture with picoPower technology, enabling efficient operation in battery-powered and embedded products.

The device provides 4 KB Flash organized as 2K x 16, 256 B EEPROM, and 256 B SRAM. The manufacturer describes 16 general-purpose I/O lines, 32 general-purpose working registers, an 8-bit timer/counter with compare modes, and a 10-bit ADC. Four PWM channels support motor, lighting, and proportional control applications, while USI and other communication resources provide options for connecting sensors and external peripherals.

The ATTINY461A operates at up to 20 MHz and supports an industrial-temperature configuration. Its 32-VQFN package measures 5 x 5 mm and helps reduce board area compared with larger leaded or dual in-line packages. The compact package requires careful PCB layout, exposed-pad thermal management, and assembly controls to achieve reliable production yield.

Typical uses include industrial sensor nodes, building and lighting controls, compact motor controllers, consumer accessories, and low-power embedded products. The 16 I/O lines provide flexibility for digital inputs, switch sensing, and direct peripheral control, while the ADC supports analog measurement from sensors. Programming and debugging use AVR-compatible tools, including MPLAB Snap for In-Circuit Serial Programming and debugging.

When placing the device, prioritize short, quiet analog connections around the ADC inputs and provide the recommended bypass capacitors close to the supply pins. Review the pin-description table and exposed-pad connection in the manufacturer documentation before assigning board functions. For an existing 32-VQFN design, verify timing, memory, peripheral, and temperature differences against any substitute rather than relying only on package shape.

This product page combines the ATTINY461A-MU specifications, verified source listings, application guidance, and drop-in comparison criteria into a practical engineering reference for compact AVR-based control-system design.

Mga alternatibo na pwedeng ilagay na ATTINY461A-MU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ATTINY461A-MU (parehas na form factor at footprint) — pagkakaiba sa Flash Memory, Package, Architecture, SRAM, General-Purpose Working Registers.

Microchip Technology
Flash Memory: 2 KB (1K x 16 bits)
Package: 32-VQFN (5 mm x 5 mm)
Ikabit sa ATTINY461A-MU →
Microchip Technology
Flash Memory: 2 KB (1K x 16)
Package: 32-QFN, 5 x 5 mm
Architecture: AVR with picoPower technology
Ikabit sa ATTINY461A-MU →
Microchip Technology
Flash Memory: 8 KB (4K x 16)
Package: 32-VQFN, 5 x 5 mm
Architecture: AVR enhanced RISC
Ikabit sa ATTINY461A-MU →

ATTINY861A-MU

✅ Drop-In
Microchip Technology
📦 32-VQFN (5 x 5 mm)
8-bit AVR RISC microcontroller · 20 MHz · 8 KB (4K x 16) · 512 bytes · 512 bytes · 16 · 32 · 8-bit with compare modes

Magkontak para sa presyo

Tingnan ang Datasheet →

ATTINY261A-MNR

✅ Drop-In
📦 32-VQFN (5 x 5 mm)
Same 32-VQFN package and 20 MHz AVR class, but Flash memory is 2 KB versus 4 KB (-50%)

📋 Alternatibo na Reference (hindi sa katalogo)

ATTINY461A-MU Mga Pinakamataas na Rating at Electrical Characteristics

Architecture 8-bit AVR RISC
Maksimum na Taktiko ng Oras 20 MHz
Flash Memory 4 KB (2K x 16)
EEPROM 256 B
SRAM 256 B
General-Purpose I/O 16 lines
General-Purpose Working Registers 32
Timer/Counter 8-bit with compare modes
ADC Resolution 10-bit
PWM Channels 4
Packhaging 32-VQFN (5 x 5 mm)
Uri ng Pagpapasok Surface mount
Programming In-Circuit Serial Programming (ICSP)
Debug Interface MPLAB Snap compatible
Temperature Grade Industrial temperature
Power Technology Microchip picoPower
Peripheral Communication Universal Serial Interface (USI)

Gabay sa Pin Configuration ng ATTINY461A-MU 32-vqfn (5 x 5 mm)

Pin configuration para sa ATTINY461A-MU (32-vqfn (5 x 5 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 32-vqfn (5 x 5 mm) package para sa ATTINY461A-MU

Wala ng detalyadong pinout data na magagamit para sa ATTINY461A-MU.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ATTINY461A-MU ay nararapat para sa 6 aplikasyons: Industrial Sensor Nodes, LED Lighting Control, Compact Motor Control, Consumer Accessories, Security and Access Controls, Low-Power Embedded Products.

🏭

Industrial Sensor Nodes

The ATTINY461A-MU fits compact sensor nodes where an 8-bit controller must acquire an analog measurement and apply local control without a larger embedded processor. Its 10-bit ADC handles sensor signals, while 4 KB Flash stores acquisition routines, calibration logic, and communication handling. Sixteen I/O lines provide connections for switches, indicators, and peripheral control. At up to 20 MHz, the AVR core can filter samples and update decisions within short deterministic intervals. Deploy the MCU near the sensor to shorten sensitive analog routing, connect the supply bypass close to the device, and isolate ADC inputs from switching nodes. This arrangement reduces board area and avoids the overhead of a high-end MCU while retaining programmable calibration and local diagnostics.

💡

LED Lighting Control

ATTINY461A-MU is appropriate for multi-channel LED lighting because its four PWM channels can independently dim loads while its 16 I/O lines manage enables, buttons, fault signals, and status indicators. The 20 MHz AVR core provides sufficient execution speed for PWM updates, debouncing, and simple communication protocols. Place PWM outputs on appropriately routed nets, keep switching currents away from ADC and programming signals, and use an external driver stage when the LED current exceeds the microcontroller’s direct output capability. The 32-VQFN package also supports compact lamp modules and retrofits where board area is constrained. Firmware should include soft-start and fault handling to avoid abrupt current changes that could produce visible flicker or stress the lighting driver.

🔧

Compact Motor Control

The ATTINY461A-MU can serve as the controller in a compact brushed-motor or solenoid-control module. Its four PWM channels can generate command signals, while the 8-bit timer/counter with compare modes supports timing and edge-detection functions. Sixteen GPIO lines are available for limit switches, position sensors, encoder inputs, and driver-control logic. For reliability, keep motor-current paths and inductive transients away from the MCU supply and ADC traces, provide local bulk and bypass capacitance, and define a safe shutdown state for every driver output. The 20 MHz operating rate supports responsive control loops, while picoPower technology can benefit battery-powered actuator modules. A logic-level driver or protected power stage should be used instead of driving high-current loads directly from the microcontroller.

📱

Consumer Accessories

ATTINY461A-MU suits compact consumer accessories that combine button input, LED indication, and one or more analog or digital sensor inputs. Its 4 KB Flash is sufficient for compact firmware with button handling, state logic, and low-rate serial communication, while 256 B SRAM and 256 B EEPROM support working variables and persistent settings. Sixteen I/O lines give designers more flexibility than a minimal control device. A 32-VQFN 5 x 5 mm package reduces the footprint in wearable-adjacent, desktop, or household modules. Firmware can use USI for communication with external controllers when a higher-rate dedicated interface is unnecessary. The design should include a defined reset behavior, protection for user-accessible connectors, and careful separation between switching loads and low-level sensor inputs.

🧩

Security and Access Controls

ATTINY461A-MU can implement a compact access-control peripheral with a keypad matrix, indicator LEDs, lock or relay command, and optional sensor input. Sixteen I/O lines are useful for debounced switch inputs and status outputs, while the four PWM channels can drive indicator behavior. The 20 MHz AVR core supports event handling and serial communication without a complex application processor. Secure programming access and lockout mechanisms should be configured before production, and an external transistor or driver interface should operate the actual lock mechanism rather than switching the load directly. Keep the reset and programming pins away from noisy relay wiring, and isolate long external cables at the board edge. This arrangement provides a compact, deterministic controller for low-power access-control modules.

🔋

Low-Power Embedded Products

ATTINY461A-MU is well matched to low-power embedded products where a picoPower 8-bit controller can handle local wake-up, sensing, and status functions without continuously running a high-power processor. Its 256 B EEPROM preserves configuration across power cycles, and the 20 MHz maximum clock permits short, focused processing intervals. The 32-VQFN package supports compact board layouts, although production assembly should account for its fine pitch and exposed thermal pad. Firmware should use the device’s low-power modes, disable unused peripherals, and select wake conditions deliberately. Decoupling capacitors should sit close to the supply terminals, while pull resistors must not interfere with programming or reset. This architecture is useful for compact environmental monitors, portable control pads, and maintenance accessories.

What are the key specifications of ATTINY461A-MU that engineers should know?
The ATTINY461A-MU is an 8-bit AVR RISC microcontroller rated up to 20 MHz, with 4 KB Flash, 256 B EEPROM, 256 B SRAM, and 16 general-purpose I/O lines. It also includes a 10-bit ADC, four PWM channels, an 8-bit timer/counter with compare modes, and USI communication in a 32-VQFN 5 x 5 mm package. According to the Microchip ATtiny461A product page, the device is based on picoPower technology and is intended for compact embedded-control designs.
What is the operating frequency of ATTINY461A-MU?
The ATTINY461A-MU supports a maximum clock frequency of 20 MHz. Its AVR processor uses an 8-bit RISC architecture, allowing the device to execute control instructions quickly while retaining the simplicity of a small embedded platform. The listed 20 MHz rating identifies the maximum operating frequency; designers should select the external clock source, fuse configuration, and power conditions according to the manufacturer hardware guidance.
How much memory does ATTINY461A-MU have?
The ATTINY461A-MU provides 4 KB of Flash program memory, 256 B of EEPROM, and 256 B of SRAM. The 4 KB Flash is organized as 2K x 16, while the EEPROM supports nonvolatile parameter or calibration storage. These memory resources place the device in the small-controller class, making it appropriate for compact products that do not require the program and data capacity of a larger 8-bit or 32-bit MCU.
Where can I download the ATTINY461A datasheet?
The official ATTINY461A product documentation is available through Microchip Technology at the product page linked on this page. That page provides the manufacturer’s technical resources for the ATtiny461A family, including the relevant device information. Use the manufacturer documents as the controlling reference for the complete pin-description table, electrical limits, package drawing, clock setup, and programming interface.
Where can I find the ATTINY461A-MU pinout?
The ATTINY461A-MU pin assignments are found in the pin-description table of the manufacturer documentation for the ATtiny461A family. The component uses a 32-VQFN 5 x 5 mm package, so its exposed pad and all numbered terminals must be reviewed together before PCB routing. The device can be programmed through ICSP and debugged with MPLAB Snap, as described by the Microchip product page.
Is ATTINY461A-MU suitable for analog sensor measurement?
Yes, ATTINY461A-MU is suitable for compact analog sensor measurement because it integrates a 10-bit ADC alongside 16 general-purpose I/O lines. The ADC can acquire sensor signals while the AVR core performs filtering, threshold decisions, or control updates. Keep analog traces short, isolate them from switching nodes, and follow the manufacturer’s grounding and bypass-capacitor recommendations to preserve measurement quality.
What can replace ATTINY461A-MU on an existing PCB?
The closest documented drop-in candidate is ATTINY861A-MU, which occupies the same 32-VQFN footprint and belongs to the same AVR family. A direct replacement must still be checked for peripheral, memory, timing, clock, and temperature differences. The search records did not establish five pin-compatible substitutes meeting the drop-in criteria, so alternative listings are limited to technically supportable same-family candidates rather than expanding the list with incompatible packages.
Is ATTINY861A-MU the same as ATTINY461A-MU?
ATTINY861A-MU and ATTINY461A-MU are related 32-VQFN AVR devices, but they are not automatically interchangeable in every design. The ATTINY461A is identified in the comparison records as having 4 KB Flash, 256 B EEPROM, 256 B SRAM, a 10-bit ADC, and 20 MHz operation. Confirm the complete pin, peripheral, timing, and operating-condition differences against the manufacturer documentation before releasing a substitution.
ATTINY461A-MU vs ATTINY861A-MU: which is better for a control board?
ATTINY461A-MU is the better default choice when its 4 KB Flash and 256 B SRAM meet the application requirement. ATTINY861A-MU is the relevant same-package candidate when the design needs the additional capability of that family member. The choice should follow a full peripheral and timing comparison rather than package size alone, especially for PWM, ADC, timer, and communications assignments.
When should I choose ATTINY461A-MU instead of ATTINY261A-MNR?
Choose ATTINY461A-MU when the firmware and working-data requirements need more memory than the ATTINY261A class provides. The comparison records identify ATTINY261A-MNR with 2 KB Flash, while ATTINY461A-MU has 4 KB Flash, 256 B EEPROM, 256 B SRAM, a 10-bit ADC, and 20 MHz operation. Both use a 32-VQFN package, so PCB geometry alone does not establish functional equivalence.
Where can I buy ATTINY461A-MU online?
Use the Request a Quote form on this page to request ATTINY461A-MU availability, current lead time, and an order quote. The form allows the request to be tied to the exact 32-VQFN MPN rather than a family-level or packaging variant. Confirm the requested quantity, shipment destination, and delivery schedule in the quote response before placing a production order.
What is the current price of ATTINY461A-MU?
Use the Request a Quote form on this page for the current ATTINY461A-MU price and quantity breaks. The structured listing price shown on the page is refreshed as commercial conditions change, while a formal quote confirms availability for the exact MPN and requested volume. The same form can also establish packaging needs and expected lead time.
What is the lead time and stock status for ATTINY461A-MU?
Request the current stock position, minimum order quantity, and lead time for ATTINY461A-MU through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled allocation, and inventory movement, so it should be confirmed for the production quantity. The product is listed as active, but current purchasing status should be established through the quote process.
Is ATTINY461A-MU still in production?
ATTINY461A-MU is listed as an active Microchip Technology product in the component comparison information. Active status indicates continued manufacturer product-family support rather than guaranteed stock at every quantity. Request the current lead time and lifecycle confirmation through the Request a Quote form before making a long-term sourcing commitment.
What tools can program and debug ATTINY461A-MU?
ATTINY461A-MU can be programmed through AVR-compatible In-Circuit Serial Programming and debugged with an MPLAB Snap connected through the appropriate 8-pin SIL interface. The Microchip product page states that the debug connection uses two device I/O pins plus the reset line. The exact adapter, cable, and connector arrangement should match the production programming fixture.

Impormasyon ng Talumpati sa Engineering for ATTINY461A-MU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose ATTINY461A-MU when the design needs a compact 8-bit AVR controller with 4 KB Flash, 256 B EEPROM, 256 B SRAM, 16 I/O lines, a 10-bit ADC, four PWM channels, and operation up to 20 MHz. Its 32-VQFN package is useful when PCB area is tightly constrained, although the footprint and exposed pad require disciplined layout and assembly. Select ATTINY861A-MU when its additional family capabilities satisfy the design and the manufacturer documentation confirms compatibility with the existing pin and peripheral assignments. Consider ATTINY261A-MNR only when its 2 KB Flash is sufficient and all required functions fit; it provides 50% less Flash than ATTINY461A-MU. For production replacements, review timing, ADC channels, PWM mappings, communication peripherals, fuse settings, and temperature limits rather than relying on the shared VQFN outline.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ATTINY861A-MU ATTINY261A-MNR
Package 32-VQFN (5 x 5 mm) 32-VQFN (5 x 5 mm) 32-VQFN (5 x 5 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Architecture 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz

Pangunahing mga Pagkakaiba

  • Twice the Flash memory of the lower-memory family candidate (kumpara saATTINY261A-MNR)
  • Broader working and nonvolatile memory for compact embedded designs (kumpara saATTINY261A-MNR)
  • Compact 32-VQFN implementation with integrated analog conversion (kumpara saATTINY261A-MNR)

Talaan ng Disenyo

Treat the 32-VQFN as a fine-pitch assembly and follow the manufacturer’s land pattern, solder-mask, paste, and exposed-pad recommendations exactly. Place the device-side bypass capacitor at the shortest permitted distance from the supply and ground pins. Confirm that the exposed pad has the required copper area and thermal-via treatment for the assembly process; inadequate pad cooling can raise junction temperature even when the ambient remains within range.

Route ADC inputs away from PWM outputs, relay drivers, switching-regulator nodes, and long external cable connections. If a sensor is physically remote, protect the trace at the connector and keep the analog ground return compact. Add filtering only after checking the source impedance and bandwidth because excessive capacitance at the ADC input can increase settling time and reduce measurement accuracy.

Do not select a substitute from package size alone. ATTINY461A-MU has 4 KB Flash, 256 B EEPROM, 256 B SRAM, 16 I/O lines, a 10-bit ADC, four PWM channels, and operation up to 20 MHz. Before using ATTINY861A-MU or ATTINY261A-MNR, verify pin functions, alternate-function assignments, timer channels, ADC channels, clock requirements, fuse behavior, and temperature limits. Package compatibility is necessary but does not by itself prove firmware-level interchangeability.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The ATTINY461A-MU is an industrial-temperature microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established for the exact MPN.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

attiny461a datasheet ATTINY461A-MU datasheet ATTINY461A-MU pinout ATTINY461A-MU 32-VQFN ATTINY461A-MU equivalent ATTINY461A-MU replacement ATTINY461A-MU vs ATTINY861A-MU ATTINY461A-MU price ATTINY461A-MU stock Microchip ATTINY461A-MU ATTINY461A ADC application ATTINY461A 20MHz microcontroller

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology ATTINY461A-MU ATTINY461A ATTINY861A-MU ATTINY261A-MNR AVR 8-bit RISC microcontroller TinyAVR picoPower 32-VQFN QFN family surface-mount package programmable microcontroller embedded control 10-bit ADC PWM USI In-Circuit Serial Programming MPLAB Snap industrial temperature 4 KB Flash 256 B EEPROM 256 B SRAM sensor node
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ