ATTINY461A-MU - 20MHz 8-Bit AVR MCU, 4KB Flash | Microchip
MPN: ATTINY461A-MU ✓ 啟用中ATTINY461A-MU 概覽
An 8-bit AVR microcontroller is an integrated circuit containing a RISC-based processor core, program memory, data EEPROM, SRAM, timers, serial interfaces, and analog peripherals on one device. Within the embedded-control hierarchy, it belongs to the Microchip ATtiny family of low-power, resource-constrained microcontrollers. The ATTINY461A combines that architecture with picoPower technology, enabling efficient operation in battery-powered and embedded products.
The device provides 4 KB Flash organized as 2K x 16, 256 B EEPROM, and 256 B SRAM. The manufacturer describes 16 general-purpose I/O lines, 32 general-purpose working registers, an 8-bit timer/counter with compare modes, and a 10-bit ADC. Four PWM channels support motor, lighting, and proportional control applications, while USI and other communication resources provide options for connecting sensors and external peripherals.
The ATTINY461A operates at up to 20 MHz and supports an industrial-temperature configuration. Its 32-VQFN package measures 5 x 5 mm and helps reduce board area compared with larger leaded or dual in-line packages. The compact package requires careful PCB layout, exposed-pad thermal management, and assembly controls to achieve reliable production yield.
Typical uses include industrial sensor nodes, building and lighting controls, compact motor controllers, consumer accessories, and low-power embedded products. The 16 I/O lines provide flexibility for digital inputs, switch sensing, and direct peripheral control, while the ADC supports analog measurement from sensors. Programming and debugging use AVR-compatible tools, including MPLAB Snap for In-Circuit Serial Programming and debugging.
When placing the device, prioritize short, quiet analog connections around the ADC inputs and provide the recommended bypass capacitors close to the supply pins. Review the pin-description table and exposed-pad connection in the manufacturer documentation before assigning board functions. For an existing 32-VQFN design, verify timing, memory, peripheral, and temperature differences against any substitute rather than relying only on package shape.
This product page combines the ATTINY461A-MU specifications, verified source listings, application guidance, and drop-in comparison criteria into a practical engineering reference for compact AVR-based control-system design.
直接替換替代品,適用於 ATTINY461A-MU — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATTINY461A-MU (相同外形與佔位) — 差異在於 Flash Memory, Package, Architecture, SRAM, General-Purpose Working Registers.
ATTINY861A-MU
✅ 直接替換聯絡詢價
查看資料表 →ATTINY261A-MNR
✅ 直接替換📋 參考替代品(不在目錄中)
ATTINY461A-MU 最大額定值與電氣特性
| Architecture | 8-bit AVR RISC |
| 最大時脈頻率 | 20 MHz |
| Flash Memory | 4 KB (2K x 16) |
| EEPROM | 256 B |
| SRAM | 256 B |
| General-Purpose I/O | 16 lines |
| General-Purpose Working Registers | 32 |
| Timer/Counter | 8-bit with compare modes |
| ADC Resolution | 10-bit |
| PWM Channels | 4 |
| 封裝 | 32-VQFN (5 x 5 mm) |
| 安裝類型 | Surface mount |
| Programming | In-Circuit Serial Programming (ICSP) |
| Debug Interface | MPLAB Snap compatible |
| Temperature Grade | Industrial temperature |
| Power Technology | Microchip picoPower |
| Peripheral Communication | Universal Serial Interface (USI) |
ATTINY461A-MU 32-vqfn (5 x 5 mm) 腳位配置指南
ATTINY461A-MU(32-vqfn (5 x 5 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATTINY461A-MU.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATTINY461A-MU 適用於 6 應用s: Industrial Sensor Nodes, LED Lighting Control, Compact Motor Control, Consumer Accessories, Security and Access Controls, Low-Power Embedded Products.
Industrial Sensor Nodes
The ATTINY461A-MU fits compact sensor nodes where an 8-bit controller must acquire an analog measurement and apply local control without a larger embedded processor. Its 10-bit ADC handles sensor signals, while 4 KB Flash stores acquisition routines, calibration logic, and communication handling. Sixteen I/O lines provide connections for switches, indicators, and peripheral control. At up to 20 MHz, the AVR core can filter samples and update decisions within short deterministic intervals. Deploy the MCU near the sensor to shorten sensitive analog routing, connect the supply bypass close to the device, and isolate ADC inputs from switching nodes. This arrangement reduces board area and avoids the overhead of a high-end MCU while retaining programmable calibration and local diagnostics.
推薦
LED Lighting Control
ATTINY461A-MU is appropriate for multi-channel LED lighting because its four PWM channels can independently dim loads while its 16 I/O lines manage enables, buttons, fault signals, and status indicators. The 20 MHz AVR core provides sufficient execution speed for PWM updates, debouncing, and simple communication protocols. Place PWM outputs on appropriately routed nets, keep switching currents away from ADC and programming signals, and use an external driver stage when the LED current exceeds the microcontroller’s direct output capability. The 32-VQFN package also supports compact lamp modules and retrofits where board area is constrained. Firmware should include soft-start and fault handling to avoid abrupt current changes that could produce visible flicker or stress the lighting driver.
推薦
Compact Motor Control
The ATTINY461A-MU can serve as the controller in a compact brushed-motor or solenoid-control module. Its four PWM channels can generate command signals, while the 8-bit timer/counter with compare modes supports timing and edge-detection functions. Sixteen GPIO lines are available for limit switches, position sensors, encoder inputs, and driver-control logic. For reliability, keep motor-current paths and inductive transients away from the MCU supply and ADC traces, provide local bulk and bypass capacitance, and define a safe shutdown state for every driver output. The 20 MHz operating rate supports responsive control loops, while picoPower technology can benefit battery-powered actuator modules. A logic-level driver or protected power stage should be used instead of driving high-current loads directly from the microcontroller.
推薦
Consumer Accessories
ATTINY461A-MU suits compact consumer accessories that combine button input, LED indication, and one or more analog or digital sensor inputs. Its 4 KB Flash is sufficient for compact firmware with button handling, state logic, and low-rate serial communication, while 256 B SRAM and 256 B EEPROM support working variables and persistent settings. Sixteen I/O lines give designers more flexibility than a minimal control device. A 32-VQFN 5 x 5 mm package reduces the footprint in wearable-adjacent, desktop, or household modules. Firmware can use USI for communication with external controllers when a higher-rate dedicated interface is unnecessary. The design should include a defined reset behavior, protection for user-accessible connectors, and careful separation between switching loads and low-level sensor inputs.
推薦
Security and Access Controls
ATTINY461A-MU can implement a compact access-control peripheral with a keypad matrix, indicator LEDs, lock or relay command, and optional sensor input. Sixteen I/O lines are useful for debounced switch inputs and status outputs, while the four PWM channels can drive indicator behavior. The 20 MHz AVR core supports event handling and serial communication without a complex application processor. Secure programming access and lockout mechanisms should be configured before production, and an external transistor or driver interface should operate the actual lock mechanism rather than switching the load directly. Keep the reset and programming pins away from noisy relay wiring, and isolate long external cables at the board edge. This arrangement provides a compact, deterministic controller for low-power access-control modules.
推薦
Low-Power Embedded Products
ATTINY461A-MU is well matched to low-power embedded products where a picoPower 8-bit controller can handle local wake-up, sensing, and status functions without continuously running a high-power processor. Its 256 B EEPROM preserves configuration across power cycles, and the 20 MHz maximum clock permits short, focused processing intervals. The 32-VQFN package supports compact board layouts, although production assembly should account for its fine pitch and exposed thermal pad. Firmware should use the device’s low-power modes, disable unused peripherals, and select wake conditions deliberately. Decoupling capacitors should sit close to the supply terminals, while pull resistors must not interfere with programming or reset. This architecture is useful for compact environmental monitors, portable control pads, and maintenance accessories.
推薦
推薦產品摘要
工程參考資料,適用於 ATTINY461A-MU — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATTINY861A-MU | ATTINY261A-MNR |
|---|---|---|---|
| Package | 32-VQFN (5 x 5 mm) | 32-VQFN (5 x 5 mm) | 32-VQFN (5 x 5 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
主要差異化特點
- Twice the Flash memory of the lower-memory family candidate (對比ATTINY261A-MNR)
- Broader working and nonvolatile memory for compact embedded designs (對比ATTINY261A-MNR)
- Compact 32-VQFN implementation with integrated analog conversion (對比ATTINY261A-MNR)
設計說明
Treat the 32-VQFN as a fine-pitch assembly and follow the manufacturer’s land pattern, solder-mask, paste, and exposed-pad recommendations exactly. Place the device-side bypass capacitor at the shortest permitted distance from the supply and ground pins. Confirm that the exposed pad has the required copper area and thermal-via treatment for the assembly process; inadequate pad cooling can raise junction temperature even when the ambient remains within range.
Route ADC inputs away from PWM outputs, relay drivers, switching-regulator nodes, and long external cable connections. If a sensor is physically remote, protect the trace at the connector and keep the analog ground return compact. Add filtering only after checking the source impedance and bandwidth because excessive capacitance at the ADC input can increase settling time and reduce measurement accuracy.
Do not select a substitute from package size alone. ATTINY461A-MU has 4 KB Flash, 256 B EEPROM, 256 B SRAM, 16 I/O lines, a 10-bit ADC, four PWM channels, and operation up to 20 MHz. Before using ATTINY861A-MU or ATTINY261A-MNR, verify pin functions, alternate-function assignments, timer channels, ADC channels, clock requirements, fuse behavior, and temperature limits. Package compatibility is necessary but does not by itself prove firmware-level interchangeability.
合規資訊
The ATTINY461A-MU is an industrial-temperature microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established for the exact MPN.