ATXMEGA192A3-MH - 32MHz 192KB Flash AVR MCU | Microchip
MPN: ATXMEGA192A3-MH ✓ NakahandaATXMEGA192A3-MH Ulas
An AVR microcontroller is a programmable semiconductor that executes firmware from embedded memory and controls sensors, communications, actuators, and other system functions. The XMEGA A3 family belongs to the hierarchy of 8/16-bit RISC microcontroller, embedded processor, microcontroller, and semiconductor. Compared with classic 8-bit AVR devices, the XMEGA architecture supports a 16-bit instruction word, a 32-bit working register, and hardware peripherals designed to reduce interrupt-handling and data-movement overhead.
The ATXMEGA192A3-MH provides 192 KB of Flash program memory organized as 96K x 16, an 8 KB boot-code section, 16 KB of SRAM, and 2 KB of EEPROM. Its operating voltage range is 1.6 V to 3.6 V, while its maximum clock frequency is 32 MHz. A 4-channel DMA controller and 8-channel event system allow data transfers and peripheral events to be serviced independently of the main CPU, improving responsiveness in real-time embedded systems.
The device uses the low-power, high-performance CMOS AVR enhanced RISC architecture. Its 64-pin VQFN package includes 64 electrical pins and an exposed thermal pad, allowing the ground connection and heat flow to be handled through the PCB. The operating frequency and memory capacity make the MCU suitable for designs requiring more code storage and peripheral integration than entry-level 8-bit microcontrollers, provided firmware, mixed-signal behavior, and package constraints are carefully evaluated.
Typical uses include building automation controllers, industrial monitoring equipment, motor-control systems, low-power sensor nodes, and connected embedded products. The large Flash capacity supports application firmware and boot code, while DMA and the event system are valuable in designs that transfer data or coordinate timing-sensitive peripherals without excessive CPU intervention.
PCB design should route the exposed pad to the ground plane and follow the manufacturer’s package recommendations for thermal-via layout. Decoupling capacitors should be placed directly beside the supply pins, and signal-routing decisions should account for the exposed-pad geometry and the mixed analog, digital, and communication functions available in the package.
This product page combines manufacturer specifications, lifecycle and compliance information, sourcing guidance, and engineering-oriented design notes. It also distinguishes the exact ordered ATXMEGA192A3-MH from related XMEGA devices whose memory sizes, package suffixes, or peripheral configurations may prevent them from serving as direct PCB drop-in replacements.
Mga alternatibo na pwedeng ilagay na ATXMEGA192A3-MH — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboATXMEGA192A3-MH Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8/16-bit RISC Microcontroller |
| Series | AVR XMEGA A3 |
| Maximum CPU Frequency | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Flash Memory | 192 KB (96K x 16) |
| Boot Code Section | 8 KB |
| SRAM | 16 KB |
| EEPROM | 2 KB |
| Operating Voltage | 1.6 V to 3.6 V |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| Architecture | AVR enhanced RISC |
| Core Word Size | 8/16-bit |
| Packhaging | 64-VFQFN with exposed pad, 9 x 9 mm |
| Packaging | Tray |
| Uri ng Pagpapasok | Surface Mount |
| Tindminan RoHS | RoHS3 compliant |
| Katayuan ng Lifecycle | Active |
Gabay sa Pin Configuration ng ATXMEGA192A3-MH 64-vfqfn with exposed pad, 9 x 9 mm
Pin configuration para sa ATXMEGA192A3-MH (64-vfqfn with exposed pad, 9 x 9 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATXMEGA192A3-MH.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATXMEGA192A3-MH ay nararapat para sa 6 aplikasyons: Building Automation Controller, Industrial Sensor Gateway, Motor Control and Positioning, Low-Power Sensor Node, Data Acquisition System, Programmable Logic Controller.
Building Automation Controller
The ATXMEGA192A3-MH fits a building-automation controller that coordinates lighting, environmental sensors, access equipment, and network interfaces. Its 192 KB of Flash provides substantial room for protocol stacks and application logic, while 16 KB of SRAM supports buffering and state management. The 32 MHz core and 4-channel DMA controller improve responsiveness when several peripheral tasks must operate concurrently. Operating from 1.6 V to 3.6 V also permits integration with low-energy sensor and communication subsystems. A practical design should use the event system for deterministic signal routing and place local decoupling beside each actively used supply group.
Inirekomenda
Industrial Sensor Gateway
The ATXMEGA192A3-MH is well suited to an industrial sensor gateway that aggregates measurements from multiple sensors and forwards them over a serial or network link. Its 96K x 16 Flash organization supports firmware, protocol handlers, and configuration data, while 2 KB of EEPROM can retain calibration or commissioning information. The 4-channel DMA controller reduces processor involvement in repetitive transfers, and the 8-channel event system can coordinate timers, counters, and external signals. The 1.6 V minimum operating voltage provides flexibility in low-power sensor networks, provided the PCB preserves clean supply routing and adequate decoupling around the 64-VFQFN device.
Inirekomenda
Motor Control and Positioning
The ATXMEGA192A3-MH can serve as the supervisory controller in a motor-control or positioning system because it combines a 32 MHz AVR core with DMA and a flexible event system. The event system can coordinate timing-sensitive comparisons, timer events, and peripheral actions, while DMA transfers data without requiring every byte to be moved by CPU instructions. Its 192 KB of Flash supports motion algorithms, fault handling, and field-upgrade logic. Designers should partition timing-critical functions from application code, validate interrupt latency, and use the exposed-pad land pattern to maintain electrical and thermal performance.
Inirekomenda
Low-Power Sensor Node
The ATXMEGA192A3-MH is appropriate for a compact sensor node when the application needs more local processing and firmware flexibility than a minimal 8-bit controller. The MCU runs from 1.6 V to 3.6 V and provides 16 KB of SRAM, 2 KB of EEPROM, and four DMA channels for moving sensor data with limited processor intervention. Its event system can trigger sampling and communication activities from peripheral events, reducing polling overhead. Battery-powered implementations should still select the appropriate low-power clock mode, disable unused peripherals, and confirm the final average-current budget because the operating voltage alone does not define system power consumption.
Inirekomenda
Data Acquisition System
The ATXMEGA192A3-MH supports a compact data-acquisition system that combines sensor conditioning, sampling control, buffering, and local processing. Its 192 KB of Flash allows larger calibration tables and control firmware, while the 4-channel DMA controller can transfer sampled data into SRAM with reduced CPU involvement. The 8-channel event system supports precise timing relationships between counters, timers, and data-capture events. For mixed-signal boards, keep analog inputs away from high-switching digital nets, observe the manufacturer’s grounding guidance, and verify the device’s electrical limits against the chosen sampling architecture.
Inirekomenda
Programmable Logic Controller
The ATXMEGA192A3-MH can implement a compact programmable logic controller for equipment control, status monitoring, and local automation. Its 32 MHz core and 32 MIPS throughput support event-driven control, while the 4-channel DMA controller and 8-channel event system offload data movement and coordinate peripheral timing. The 192 KB of Flash accommodates control algorithms, diagnostics, and communications, and 2 KB of EEPROM can preserve configuration information. For reliable operation, validate worst-case interrupt latency, isolate external interfaces, and follow the exposed-pad grounding and thermal-via layout prescribed for the 64-VFQFN package.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATXMEGA192A3-MH — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Manufacturer | Microchip Technology |
| Package | 64-VFQFN with exposed pad, 9 x 9 mm |
| CPU Architecture | AVR enhanced RISC, 8/16-bit |
| Maximum Frequency | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Operating Voltage | 1.6 V to 3.6 V |
| Flash Memory | 192 KB (96K x 16) |
| SRAM | 16 KB |
| EEPROM | 2 KB |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| Boot Code Section | 8 KB |
Pangunahing mga Pagkakaiba
- Large Flash allocation for embedded control firmware (kumpara saATXMEGA32D4-AUR)
- Higher processing capacity within the AVR ecosystem (kumpara saATMEGA329A-MU)
- Dedicated memory and event-routing resources (kumpara saATXMEGA16E5-MUR)
Talaan ng Disenyo
Treat the exposed pad as a functional ground and thermal feature rather than an optional area. Connect it to the ground plane using the manufacturer’s land pattern, add the recommended thermal vias, and avoid placing sensitive analog traces beneath the pad unless the board stack-up and return-current plan permit it. The 9 x 9 mm 64-VFQFN package also requires careful component placement so that soldering, inspection, and rework remain practical.
Place the required bypass capacitors immediately adjacent to the supply and ground pins, with separate high-frequency and bulk capacitance selected according to the manufacturer’s application guidance. Keep the 1.6 V to 3.6 V operating range in view when choosing regulators and level-shift networks. Because the MCU combines digital peripherals with potentially sensitive analog functions, return currents should remain short and local to the device rather than sharing long paths with display, motor, or communications loads.
Do not treat every ATXMEGA192A3 ordering suffix as an exact drop-in replacement without checking the ordering table. Related devices can differ in temperature range, packaging, flash organization, or peripheral configuration even when their family names are similar. A valid replacement must match the package dimensions, exposed-pad connection, power pins, communication pins, and all externally connected signal assignments on the PCB.
Assign clock, programming, and communication nets away from high-current switching nodes and noisy analog inputs. Follow the device’s external-circuit requirements for crystals or other clock sources, and keep oscillator traces short. For designs using DMA or the event system, document which peripheral events trigger data movement and verify timing under the highest interrupt load, because a logically correct peripheral allocation can still fail if worst-case latency is not budgeted.
Impormasyon ng Pagsunod sa Kautusan
A product listing identifies the exact MPN as RoHS3 compliant. No additional REACH, AEC-Q100, halogen-free, lead-free, or conflict-minerals conclusion is stated for the exact ordering configuration.