Microchip Technology

ATXMEGA192A3-MH - 32MHz 192KB Flash AVR MCU | Microchip

MPN: ATXMEGA192A3-MH ✓ Aktif
1.6 V to 3.6 V Vdss 64-VFQFN with exposed pad, 9 x 9 mm Package 32 MHz Speed 192 KB (96K x 16) Memory
MOQ: 1 |

ATXMEGA192A3-MH Genel Bakış

The Microchip Technology ATXMEGA192A3-MH is an 8/16-bit AVR XMEGA A3 microcontroller operating up to 32 MHz, with 192 KB of self-programming Flash memory, 16 KB of SRAM, and 2 KB of EEPROM in a 64-pin VQFN package with an exposed pad. It operates from 1.6 V to 3.6 V and combines an AVR enhanced RISC core with four-channel DMA, an eight-channel event system, and up to 32 MIPS throughput.

An AVR microcontroller is a programmable semiconductor that executes firmware from embedded memory and controls sensors, communications, actuators, and other system functions. The XMEGA A3 family belongs to the hierarchy of 8/16-bit RISC microcontroller, embedded processor, microcontroller, and semiconductor. Compared with classic 8-bit AVR devices, the XMEGA architecture supports a 16-bit instruction word, a 32-bit working register, and hardware peripherals designed to reduce interrupt-handling and data-movement overhead.

The ATXMEGA192A3-MH provides 192 KB of Flash program memory organized as 96K x 16, an 8 KB boot-code section, 16 KB of SRAM, and 2 KB of EEPROM. Its operating voltage range is 1.6 V to 3.6 V, while its maximum clock frequency is 32 MHz. A 4-channel DMA controller and 8-channel event system allow data transfers and peripheral events to be serviced independently of the main CPU, improving responsiveness in real-time embedded systems.

The device uses the low-power, high-performance CMOS AVR enhanced RISC architecture. Its 64-pin VQFN package includes 64 electrical pins and an exposed thermal pad, allowing the ground connection and heat flow to be handled through the PCB. The operating frequency and memory capacity make the MCU suitable for designs requiring more code storage and peripheral integration than entry-level 8-bit microcontrollers, provided firmware, mixed-signal behavior, and package constraints are carefully evaluated.

Typical uses include building automation controllers, industrial monitoring equipment, motor-control systems, low-power sensor nodes, and connected embedded products. The large Flash capacity supports application firmware and boot code, while DMA and the event system are valuable in designs that transfer data or coordinate timing-sensitive peripherals without excessive CPU intervention.

PCB design should route the exposed pad to the ground plane and follow the manufacturer’s package recommendations for thermal-via layout. Decoupling capacitors should be placed directly beside the supply pins, and signal-routing decisions should account for the exposed-pad geometry and the mixed analog, digital, and communication functions available in the package.

This product page combines manufacturer specifications, lifecycle and compliance information, sourcing guidance, and engineering-oriented design notes. It also distinguishes the exact ordered ATXMEGA192A3-MH from related XMEGA devices whose memory sizes, package suffixes, or peripheral configurations may prevent them from serving as direct PCB drop-in replacements.

Drop-in alternatifler için ATXMEGA192A3-MH — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

ATXMEGA192A3-MH Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 8/16-bit RISC Microcontroller
Series AVR XMEGA A3
Maximum CPU Frequency 32 MHz
Maximum Throughput 32 MIPS
Flash Memory 192 KB (96K x 16)
Boot Code Section 8 KB
SRAM 16 KB
EEPROM 2 KB
Operating Voltage 1.6 V to 3.6 V
DMA Controller 4 channels
Event System 8 channels
Architecture AVR enhanced RISC
Core Word Size 8/16-bit
Paket 64-VFQFN with exposed pad, 9 x 9 mm
Packaging Tray
Montaj Türü Surface Mount
RoHS Durumu RoHS3 compliant
Yaşam Döngüsü Durumu Active

ATXMEGA192A3-MH 64-vfqfn with exposed pad, 9 x 9 mm Pin Yapısı Kılavuzu

ATXMEGA192A3-MH (64-vfqfn with exposed pad, 9 x 9 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-vfqfn with exposed pad, 9 x 9 mm paket pin çizelgesi için ATXMEGA192A3-MH

Ayrıntılı pin çıkış verisi mevcut değil: ATXMEGA192A3-MH.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ATXMEGA192A3-MH için uygundur 6 uygulamas: Building Automation Controller, Industrial Sensor Gateway, Motor Control and Positioning, Low-Power Sensor Node, Data Acquisition System, Programmable Logic Controller.

🏭

Building Automation Controller

The ATXMEGA192A3-MH fits a building-automation controller that coordinates lighting, environmental sensors, access equipment, and network interfaces. Its 192 KB of Flash provides substantial room for protocol stacks and application logic, while 16 KB of SRAM supports buffering and state management. The 32 MHz core and 4-channel DMA controller improve responsiveness when several peripheral tasks must operate concurrently. Operating from 1.6 V to 3.6 V also permits integration with low-energy sensor and communication subsystems. A practical design should use the event system for deterministic signal routing and place local decoupling beside each actively used supply group.

🧩

Industrial Sensor Gateway

The ATXMEGA192A3-MH is well suited to an industrial sensor gateway that aggregates measurements from multiple sensors and forwards them over a serial or network link. Its 96K x 16 Flash organization supports firmware, protocol handlers, and configuration data, while 2 KB of EEPROM can retain calibration or commissioning information. The 4-channel DMA controller reduces processor involvement in repetitive transfers, and the 8-channel event system can coordinate timers, counters, and external signals. The 1.6 V minimum operating voltage provides flexibility in low-power sensor networks, provided the PCB preserves clean supply routing and adequate decoupling around the 64-VFQFN device.

🔧

Motor Control and Positioning

The ATXMEGA192A3-MH can serve as the supervisory controller in a motor-control or positioning system because it combines a 32 MHz AVR core with DMA and a flexible event system. The event system can coordinate timing-sensitive comparisons, timer events, and peripheral actions, while DMA transfers data without requiring every byte to be moved by CPU instructions. Its 192 KB of Flash supports motion algorithms, fault handling, and field-upgrade logic. Designers should partition timing-critical functions from application code, validate interrupt latency, and use the exposed-pad land pattern to maintain electrical and thermal performance.

🧩

Low-Power Sensor Node

The ATXMEGA192A3-MH is appropriate for a compact sensor node when the application needs more local processing and firmware flexibility than a minimal 8-bit controller. The MCU runs from 1.6 V to 3.6 V and provides 16 KB of SRAM, 2 KB of EEPROM, and four DMA channels for moving sensor data with limited processor intervention. Its event system can trigger sampling and communication activities from peripheral events, reducing polling overhead. Battery-powered implementations should still select the appropriate low-power clock mode, disable unused peripherals, and confirm the final average-current budget because the operating voltage alone does not define system power consumption.

📟

Data Acquisition System

The ATXMEGA192A3-MH supports a compact data-acquisition system that combines sensor conditioning, sampling control, buffering, and local processing. Its 192 KB of Flash allows larger calibration tables and control firmware, while the 4-channel DMA controller can transfer sampled data into SRAM with reduced CPU involvement. The 8-channel event system supports precise timing relationships between counters, timers, and data-capture events. For mixed-signal boards, keep analog inputs away from high-switching digital nets, observe the manufacturer’s grounding guidance, and verify the device’s electrical limits against the chosen sampling architecture.

🏭

Programmable Logic Controller

The ATXMEGA192A3-MH can implement a compact programmable logic controller for equipment control, status monitoring, and local automation. Its 32 MHz core and 32 MIPS throughput support event-driven control, while the 4-channel DMA controller and 8-channel event system offload data movement and coordinate peripheral timing. The 192 KB of Flash accommodates control algorithms, diagnostics, and communications, and 2 KB of EEPROM can preserve configuration information. For reliable operation, validate worst-case interrupt latency, isolate external interfaces, and follow the exposed-pad grounding and thermal-via layout prescribed for the 64-VFQFN package.

Where to buy ATXMEGA192A3-MH online?
The ATXMEGA192A3-MH can be requested through the Request a Quote form on this page. The component is identified as an active Microchip Technology 64-VFQFN microcontroller with 192 KB of Flash, and the listed ordering configuration uses a tray. Request a quote with your required quantity, target date, and shipment location so the exact MPN and packaging can be confirmed before an order is placed.
What is the price of ATXMEGA192A3-MH?
Current unit pricing for the ATXMEGA192A3-MH is determined through the Request a Quote form on this page. The part is an active Microchip Technology MCU in a 64-VFQFN package with an exposed pad, and its commercial value can vary with quantity, packaging, and current component supply. Submit the required order quantity for a current quotation tied to the exact ATXMEGA192A3-MH ordering code.
What is the lead time for ATXMEGA192A3-MH?
The lead time for ATXMEGA192A3-MH should be confirmed through the Request a Quote form on this page using the required quantity and target delivery date. The manufacturer product listing identifies the device as active, and one authorized-channel listing reports an estimated seven-week lead time for the tray-packaged part. That estimate should be treated as channel-specific until confirmed for your order.
Is ATXMEGA192A3-MH in stock?
ATXMEGA192A3-MH is listed as active, and channel inventory figures can change without notice. Use the Request a Quote form on this page to request current availability for the exact 64-VFQFN tray configuration. The product can be allocated only after the quantity, date, and commercial terms are confirmed, so engineers should not base a production schedule on a general listing indication.
What are the key specifications of ATXMEGA192A3-MH that engineers should know?
The ATXMEGA192A3-MH combines a 32 MHz AVR enhanced RISC core, 192 KB of Flash, 16 KB of SRAM, and 2 KB of EEPROM in a 64-VFQFN package. According to the Microchip ATXMEGA192A3 product page, it also includes an 8 KB boot-code section, 4-channel DMA, an 8-channel event system, and up to 32 MIPS throughput from a 1.6 V to 3.6 V supply.
What is the ATXMEGA192A3-MH operating voltage range?
The ATXMEGA192A3-MH operates from 1.6 V to 3.6 V. Its listed channel specifications identify the device as an 8/16-bit AVR microcontroller with a maximum clock frequency of 32 MHz. Designers should use the manufacturer datasheet when assigning regulator headroom, decoupling, and input-voltage tolerances for the final board.
Where to download the ATXMEGA192A3-MH datasheet PDF?
The official ATXMEGA192A3-MH technical documentation is available through the Microchip Technology product page linked on this page. The family page identifies 192 KB of self-programming Flash, 8 KB of boot-code memory, 16 KB of SRAM, 2 KB of EEPROM, 4-channel DMA, an 8-channel event system, and up to 32 MIPS throughput. Use the manufacturer PDF for authoritative pin assignments, electrical limits, and package drawings.
Where can I find the ATXMEGA192A3-MH pinout?
The ATXMEGA192A3-MH pinout is defined by the manufacturer’s 64-pin VQFN package documentation. The device uses a 64-VFQFN package with an exposed pad, but a verified numbered pin-description table is not reproduced in this page. Use the pin-description table and package drawing in the official Microchip ATXMEGA192A3 datasheet before assigning PCB nets or connecting the exposed pad.
What can replace the ATXMEGA192A3-MH?
A true drop-in replacement must use the same 64-VFQFN footprint, preserve the pin assignments, and provide compatible electrical and peripheral functions. Related ATXMEGA192A3, ATXMEGA256C3-MH, ATXMEGA256A3-MHR, and ATXMEGA128D3-MHR devices are not automatically interchangeable because their memory capacities, package suffixes, and peripheral sets can differ. Use the Microchip cross-reference search and the manufacturer pin tables to validate a substitution.
Is ATXMEGA192A3-MH suitable for industrial control applications?
The ATXMEGA192A3-MH is suitable for many industrial-control tasks that fit its 32 MHz performance and memory resources. It provides 192 KB of Flash, 16 KB of SRAM, 4-channel DMA, and an 8-channel event system for embedded control, data movement, and event coordination. The Microchip family page specifically identifies building, industrial, and motor applications as suitable markets for the ATXMEGA A3 series.
When should I choose ATXMEGA192A3-MH over a smaller 8-bit AVR?
Choose the ATXMEGA192A3-MH when firmware size, SRAM, DMA, event routing, or processing speed exceeds the practical limits of a smaller 8-bit AVR. It provides 192 KB of Flash, 16 KB of SRAM, 2 KB of EEPROM, and up to 32 MIPS at 32 MHz. Select a smaller AVR instead when the application has modest code and data requirements and a smaller, simpler package would reduce cost or board complexity.
What is the difference between ATXMEGA192A3-MH and ATXMEGA192A3-MHR?
The ATXMEGA192A3-MH and ATXMEGA192A3-MHR identify closely related versions of the same ATXMEGA192A3 device, with the final code character associated with the ordering and packaging configuration. One listed order is explicitly packaged as a tray, while the MHR ordering code is separately listed by a channel. Confirm the package dimensions, temperature grade, and reel or tray configuration in the manufacturer ordering information before treating the two as interchangeable.
What is the best Microchip equivalent for ATXMEGA192A3-MH?
The closest Microchip family member is generally found by comparing the official ATXMEGA192A3 device against compatible ATXMEGA A3 and C3 variants. A replacement must match the 64-VFQFN footprint and pin assignments as well as the required memory and peripheral configuration. The ATXMEGA256C3-MH and ATXMEGA256A3-MHR appear in cross-reference comparisons, but higher Flash capacity alone does not establish drop-in compatibility.
Does the ATXMEGA192A3-MH need an external crystal for 32 MHz operation?
The ATXMEGA192A3-MH supports operation up to 32 MHz, but the specific clock architecture and internal oscillator configuration must be selected from the manufacturer’s clocking guidance. A design may use an external clock source when accuracy, low jitter, or deterministic timing is required. Confirm the selected clock path and fuse configuration in the device’s clock-system and programming documentation.
How is the ATXMEGA192A3-MH exposed pad connected?
The exposed pad is part of the 64-VFQFN package and must be handled according to the Microchip package drawing rather than treated as an unused lead. Connect it to the ground plane and place thermal vias as directed by the manufacturer’s land-pattern guidance. This connection improves heat removal and provides a low-impedance return path for the high-density surface-mount package.

Mühendislik referans verileri: ATXMEGA192A3-MH — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the ATXMEGA192A3-MH when an embedded design needs the AVR XMEGA toolchain together with 192 KB of Flash, 16 KB of SRAM, 32 MHz operation, DMA, and a multi-channel event system. It is particularly attractive for building controls, industrial monitoring, sensor gateways, and compact motor-control products that benefit from deterministic peripheral routing. Select a smaller ATXMEGA or ATtiny device when code size, SRAM, and processing demand are modest and board area or power budget takes priority. Before replacing the device with ATXMEGA192A3-MHR or another A3/C3-family part, verify the ordering suffix, temperature grade, package drawing, exposed-pad connection, pin assignments, and all boot and programming interfaces. A higher-memory related device may fit a board functionally but still fail a strict drop-in audit because reset, clock, peripheral, or pin multiplexing requirements can differ.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Manufacturer Microchip Technology
Package 64-VFQFN with exposed pad, 9 x 9 mm
CPU Architecture AVR enhanced RISC, 8/16-bit
Maximum Frequency 32 MHz
Maximum Throughput 32 MIPS
Operating Voltage 1.6 V to 3.6 V
Flash Memory 192 KB (96K x 16)
SRAM 16 KB
EEPROM 2 KB
DMA Controller 4 channels
Event System 8 channels
Boot Code Section 8 KB

Ana Farklılayıcılar

  • Large Flash allocation for embedded control firmware (karşılaştırma:ATXMEGA32D4-AUR)
  • Higher processing capacity within the AVR ecosystem (karşılaştırma:ATMEGA329A-MU)
  • Dedicated memory and event-routing resources (karşılaştırma:ATXMEGA16E5-MUR)

Tasarım Notları

Treat the exposed pad as a functional ground and thermal feature rather than an optional area. Connect it to the ground plane using the manufacturer’s land pattern, add the recommended thermal vias, and avoid placing sensitive analog traces beneath the pad unless the board stack-up and return-current plan permit it. The 9 x 9 mm 64-VFQFN package also requires careful component placement so that soldering, inspection, and rework remain practical.

Place the required bypass capacitors immediately adjacent to the supply and ground pins, with separate high-frequency and bulk capacitance selected according to the manufacturer’s application guidance. Keep the 1.6 V to 3.6 V operating range in view when choosing regulators and level-shift networks. Because the MCU combines digital peripherals with potentially sensitive analog functions, return currents should remain short and local to the device rather than sharing long paths with display, motor, or communications loads.

Do not treat every ATXMEGA192A3 ordering suffix as an exact drop-in replacement without checking the ordering table. Related devices can differ in temperature range, packaging, flash organization, or peripheral configuration even when their family names are similar. A valid replacement must match the package dimensions, exposed-pad connection, power pins, communication pins, and all externally connected signal assignments on the PCB.

Assign clock, programming, and communication nets away from high-current switching nodes and noisy analog inputs. Follow the device’s external-circuit requirements for crystals or other clock sources, and keep oscillator traces short. For designs using DMA or the event system, document which peripheral events trigger data movement and verify timing under the highest interrupt load, because a logically correct peripheral allocation can still fail if worst-case latency is not budgeted.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

A product listing identifies the exact MPN as RoHS3 compliant. No additional REACH, AEC-Q100, halogen-free, lead-free, or conflict-minerals conclusion is stated for the exact ordering configuration.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ATXMEGA192A3-MH datasheet ATXMEGA192A3-MH datasheet pdf ATXMEGA192A3-MH pinout ATXMEGA192A3-MH specifications ATXMEGA192A3-MH 64 VQFN ATXMEGA192A3-MH 192KB flash ATXMEGA192A3-MH 32MHz ATXMEGA192A3-MH equivalent ATXMEGA192A3-MH replacement ATXMEGA192A3-MH vs ATXMEGA192A3-MHR ATXMEGA192A3-MH price ATXMEGA192A3-MH stock Microchip ATXMEGA192A3-MH ATXMEGA192A3-MH industrial controller ATXMEGA192A3-MH sensor gateway

İlgili Bileşenler ve Terimler

Microchip Technology ATXMEGA192A3-MH ATXMEGA192A3 AVR AVR enhanced RISC architecture 8/16-bit microcontroller embedded microcontroller semiconductor 192 KB Flash memory 16 KB SRAM 2 KB EEPROM 32 MHz clock 32 MIPS throughput direct memory access DMA controller event system 64-VFQFN VQFN package family exposed pad surface-mount technology industrial control building automation sensor gateway motor control RoHS
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle