ATXMEGA192A3-MH - 32MHz 192KB Flash AVR MCU | Microchip
부품 번호: ATXMEGA192A3-MH ✓ 활성ATXMEGA192A3-MH 개요
An AVR microcontroller is a programmable semiconductor that executes firmware from embedded memory and controls sensors, communications, actuators, and other system functions. The XMEGA A3 family belongs to the hierarchy of 8/16-bit RISC microcontroller, embedded processor, microcontroller, and semiconductor. Compared with classic 8-bit AVR devices, the XMEGA architecture supports a 16-bit instruction word, a 32-bit working register, and hardware peripherals designed to reduce interrupt-handling and data-movement overhead.
The ATXMEGA192A3-MH provides 192 KB of Flash program memory organized as 96K x 16, an 8 KB boot-code section, 16 KB of SRAM, and 2 KB of EEPROM. Its operating voltage range is 1.6 V to 3.6 V, while its maximum clock frequency is 32 MHz. A 4-channel DMA controller and 8-channel event system allow data transfers and peripheral events to be serviced independently of the main CPU, improving responsiveness in real-time embedded systems.
The device uses the low-power, high-performance CMOS AVR enhanced RISC architecture. Its 64-pin VQFN package includes 64 electrical pins and an exposed thermal pad, allowing the ground connection and heat flow to be handled through the PCB. The operating frequency and memory capacity make the MCU suitable for designs requiring more code storage and peripheral integration than entry-level 8-bit microcontrollers, provided firmware, mixed-signal behavior, and package constraints are carefully evaluated.
Typical uses include building automation controllers, industrial monitoring equipment, motor-control systems, low-power sensor nodes, and connected embedded products. The large Flash capacity supports application firmware and boot code, while DMA and the event system are valuable in designs that transfer data or coordinate timing-sensitive peripherals without excessive CPU intervention.
PCB design should route the exposed pad to the ground plane and follow the manufacturer’s package recommendations for thermal-via layout. Decoupling capacitors should be placed directly beside the supply pins, and signal-routing decisions should account for the exposed-pad geometry and the mixed analog, digital, and communication functions available in the package.
This product page combines manufacturer specifications, lifecycle and compliance information, sourcing guidance, and engineering-oriented design notes. It also distinguishes the exact ordered ATXMEGA192A3-MH from related XMEGA devices whose memory sizes, package suffixes, or peripheral configurations may prevent them from serving as direct PCB drop-in replacements.
드롭인 대체품: ATXMEGA192A3-MH — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청ATXMEGA192A3-MH 최대 정격 & 전기적 특성
| Product Type | 8/16-bit RISC Microcontroller |
| Series | AVR XMEGA A3 |
| Maximum CPU Frequency | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Flash Memory | 192 KB (96K x 16) |
| Boot Code Section | 8 KB |
| SRAM | 16 KB |
| EEPROM | 2 KB |
| Operating Voltage | 1.6 V to 3.6 V |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| Architecture | AVR enhanced RISC |
| Core Word Size | 8/16-bit |
| 패키지 | 64-VFQFN with exposed pad, 9 x 9 mm |
| Packaging | Tray |
| 실장 유형 | Surface Mount |
| RoHS 상태 | RoHS3 compliant |
| 수명 주기 상태 | Active |
ATXMEGA192A3-MH 64-vfqfn with exposed pad, 9 x 9 mm 핀 구성 가이드
ATXMEGA192A3-MH(64-vfqfn with exposed pad, 9 x 9 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATXMEGA192A3-MH.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATXMEGA192A3-MH 적합 용도: 6 애플리케이션s: Building Automation Controller, Industrial Sensor Gateway, Motor Control and Positioning, Low-Power Sensor Node, Data Acquisition System, Programmable Logic Controller.
Building Automation Controller
The ATXMEGA192A3-MH fits a building-automation controller that coordinates lighting, environmental sensors, access equipment, and network interfaces. Its 192 KB of Flash provides substantial room for protocol stacks and application logic, while 16 KB of SRAM supports buffering and state management. The 32 MHz core and 4-channel DMA controller improve responsiveness when several peripheral tasks must operate concurrently. Operating from 1.6 V to 3.6 V also permits integration with low-energy sensor and communication subsystems. A practical design should use the event system for deterministic signal routing and place local decoupling beside each actively used supply group.
추천
Industrial Sensor Gateway
The ATXMEGA192A3-MH is well suited to an industrial sensor gateway that aggregates measurements from multiple sensors and forwards them over a serial or network link. Its 96K x 16 Flash organization supports firmware, protocol handlers, and configuration data, while 2 KB of EEPROM can retain calibration or commissioning information. The 4-channel DMA controller reduces processor involvement in repetitive transfers, and the 8-channel event system can coordinate timers, counters, and external signals. The 1.6 V minimum operating voltage provides flexibility in low-power sensor networks, provided the PCB preserves clean supply routing and adequate decoupling around the 64-VFQFN device.
추천
Motor Control and Positioning
The ATXMEGA192A3-MH can serve as the supervisory controller in a motor-control or positioning system because it combines a 32 MHz AVR core with DMA and a flexible event system. The event system can coordinate timing-sensitive comparisons, timer events, and peripheral actions, while DMA transfers data without requiring every byte to be moved by CPU instructions. Its 192 KB of Flash supports motion algorithms, fault handling, and field-upgrade logic. Designers should partition timing-critical functions from application code, validate interrupt latency, and use the exposed-pad land pattern to maintain electrical and thermal performance.
추천
Low-Power Sensor Node
The ATXMEGA192A3-MH is appropriate for a compact sensor node when the application needs more local processing and firmware flexibility than a minimal 8-bit controller. The MCU runs from 1.6 V to 3.6 V and provides 16 KB of SRAM, 2 KB of EEPROM, and four DMA channels for moving sensor data with limited processor intervention. Its event system can trigger sampling and communication activities from peripheral events, reducing polling overhead. Battery-powered implementations should still select the appropriate low-power clock mode, disable unused peripherals, and confirm the final average-current budget because the operating voltage alone does not define system power consumption.
추천
Data Acquisition System
The ATXMEGA192A3-MH supports a compact data-acquisition system that combines sensor conditioning, sampling control, buffering, and local processing. Its 192 KB of Flash allows larger calibration tables and control firmware, while the 4-channel DMA controller can transfer sampled data into SRAM with reduced CPU involvement. The 8-channel event system supports precise timing relationships between counters, timers, and data-capture events. For mixed-signal boards, keep analog inputs away from high-switching digital nets, observe the manufacturer’s grounding guidance, and verify the device’s electrical limits against the chosen sampling architecture.
추천
Programmable Logic Controller
The ATXMEGA192A3-MH can implement a compact programmable logic controller for equipment control, status monitoring, and local automation. Its 32 MHz core and 32 MIPS throughput support event-driven control, while the 4-channel DMA controller and 8-channel event system offload data movement and coordinate peripheral timing. The 192 KB of Flash accommodates control algorithms, diagnostics, and communications, and 2 KB of EEPROM can preserve configuration information. For reliable operation, validate worst-case interrupt latency, isolate external interfaces, and follow the exposed-pad grounding and thermal-via layout prescribed for the 64-VFQFN package.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATXMEGA192A3-MH — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Manufacturer | Microchip Technology |
| Package | 64-VFQFN with exposed pad, 9 x 9 mm |
| CPU Architecture | AVR enhanced RISC, 8/16-bit |
| Maximum Frequency | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Operating Voltage | 1.6 V to 3.6 V |
| Flash Memory | 192 KB (96K x 16) |
| SRAM | 16 KB |
| EEPROM | 2 KB |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| Boot Code Section | 8 KB |
주요 차별점
- Large Flash allocation for embedded control firmware (vs ATXMEGA32D4-AUR)
- Higher processing capacity within the AVR ecosystem (vs ATMEGA329A-MU)
- Dedicated memory and event-routing resources (vs ATXMEGA16E5-MUR)
설계 노트
Treat the exposed pad as a functional ground and thermal feature rather than an optional area. Connect it to the ground plane using the manufacturer’s land pattern, add the recommended thermal vias, and avoid placing sensitive analog traces beneath the pad unless the board stack-up and return-current plan permit it. The 9 x 9 mm 64-VFQFN package also requires careful component placement so that soldering, inspection, and rework remain practical.
Place the required bypass capacitors immediately adjacent to the supply and ground pins, with separate high-frequency and bulk capacitance selected according to the manufacturer’s application guidance. Keep the 1.6 V to 3.6 V operating range in view when choosing regulators and level-shift networks. Because the MCU combines digital peripherals with potentially sensitive analog functions, return currents should remain short and local to the device rather than sharing long paths with display, motor, or communications loads.
Do not treat every ATXMEGA192A3 ordering suffix as an exact drop-in replacement without checking the ordering table. Related devices can differ in temperature range, packaging, flash organization, or peripheral configuration even when their family names are similar. A valid replacement must match the package dimensions, exposed-pad connection, power pins, communication pins, and all externally connected signal assignments on the PCB.
Assign clock, programming, and communication nets away from high-current switching nodes and noisy analog inputs. Follow the device’s external-circuit requirements for crystals or other clock sources, and keep oscillator traces short. For designs using DMA or the event system, document which peripheral events trigger data movement and verify timing under the highest interrupt load, because a logically correct peripheral allocation can still fail if worst-case latency is not budgeted.
규정 준수 정보
A product listing identifies the exact MPN as RoHS3 compliant. No additional REACH, AEC-Q100, halogen-free, lead-free, or conflict-minerals conclusion is stated for the exact ordering configuration.