BCM5248XA4IFB - 8-Port 10/100BASE-TX Transceiver | Broadcom
MPN: BCM5248XA4IFB ✓ NakahandaBCM5248XA4IFB Ulas
An Ethernet transceiver is the physical-layer component between a network controller and an external RJ45 connector. It converts digital data into differential signaling for transmission and recovers incoming signals for the controller. A multiport 10/100BASE-TX transceiver reduces the number of individual physical-layer devices required in switches, routers, industrial controllers, and other multiport Ethernet systems. Unlike a 1000BASE-T device, its stated network standard is 10/100BASE-TX, so designers should verify that 100 Mb/s operation satisfies the target system.
The BCM5248XA4IFB's defining feature is its eight-port 10/100BASE-TX integration. This can simplify board partitioning by concentrating the transmit and receive functions for eight copper links in one package. The product is associated with industrial networking, serial communication, signal driving, and receiver-stage applications. The associated BCM5248XA4IFBG ordering code is described as an octal 10/100BASE-TX transceiver and is the closest matching part identified for comparison.
Use the manufacturer's device documentation and package drawings to define the exposed-pad layout, recommended magnetic-component interface, supply rails, signal-integrity constraints, and thermal conditions. These implementation details are critical in an eight-port design because each channel must meet Ethernet transmission criteria while the complete transceiver operates across multiple adjacent cables and magnetics. PCB stack-up, return paths, differential impedance, isolation gaps, and power distribution therefore warrant careful review.
Typical uses include industrial Ethernet switches, embedded network equipment, factory automation controllers, telecom access hardware, and other systems requiring several Fast Ethernet physical-layer channels. A multiport device is most beneficial when the design needs several standardized 10/100BASE-TX ports and board area is constrained. It is less suitable when a design requires 1000BASE-T, quad-port or octal-port features that can be implemented more simply with discrete transceivers.
Before releasing a layout, compare every electrical limit and pin assignment against the manufacturer datasheet, including absolute maximum ratings, recommended operating conditions, interface timing, and the thermal design of the exposed package area. Also verify the transformer or integrated-magnetics arrangement, transmit-side termination, receive-side network termination, and required test points. This page consolidates the identified product attributes, comparison points, sourcing guidance, and engineering considerations into a structured design reference.
Mga alternatibo na pwedeng ilagay na BCM5248XA4IFB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboBCM5248XA4IFB Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Interface Transceiver IC |
| Ethernet Standard | 10/100BASE-TX |
| Number of Ports | 8 ports |
| Rate ng Data | 10 Mb/s or 100 Mb/s |
| Application Category | Industrial networking |
| Signal Functions | Signal driving and receiver stages |
| Primary Interface | 10/100BASE-TX copper Ethernet |
| Manufacturer | Broadcom |
| Manufacturer Part Number | BCM5248XA4IFB |
Gabay sa Pin Configuration ng BCM5248XA4IFB standard
Pin configuration para sa BCM5248XA4IFB (standard package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa BCM5248XA4IFB.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
BCM5248XA4IFB ay nararapat para sa 6 aplikasyons: Industrial Ethernet Switch, Factory Automation Gateway, Embedded Network Appliance, Telecom Access Equipment, Video Surveillance Concentrator, Robotics Control Network.
Industrial Ethernet Switch
The BCM5248XA4IFB is suitable for an industrial Ethernet switch that requires eight copper Fast Ethernet ports in a compact physical-layer design. Its eight 10/100BASE-TX channels replace separate single-port transceiver arrangements, helping standardize the board and reduce component count. Each channel must still be routed to its required Ethernet magnetic interface, and the design must preserve the specified differential impedance, return path, isolation spacing, and power distribution. The device is most attractive when all eight ports are needed, because unused-port requirements can make a lower-port-count solution simpler. Confirm supply-current limits, thermal performance, channel timing, and package details in the current Broadcom documentation before committing the PCB.
Inirekomenda
Factory Automation Gateway
A factory automation gateway can use the BCM5248XA4IFB to provide eight 10/100BASE-TX links for controllers, sensors, vision equipment, and service networks. Consolidating the Fast Ethernet physical layers simplifies connection planning and keeps channel implementations consistent across a multiport gateway. The 100 Mb/s ceiling must be checked against each machine or service connection, while copper cabling remains subject to the installation environment. Industrial qualification also requires checking the specified operating-temperature range, isolation, ESD exposure, power-loss behavior, and reliability requirements. Keep high-speed and power-supply routing away from sensitive receive paths, provide stable local decoupling, and verify every channel against the manufacturer reference layout.
Inirekomenda
Embedded Network Appliance
The BCM5248XA4IFB fits embedded network appliances that expose multiple Fast Ethernet service ports while using a host controller or switching silicon for packet processing. Its eight integrated 10/100BASE-TX channels provide a consistent physical-layer interface across the appliance and can reduce board area compared with discrete implementations. Because the device supports 10 Mb/s and 100 Mb/s rather than Gigabit Ethernet, it is best for management, control, sensor, or legacy-network ports. Designers should allocate space for eight channel magnetics or the manufacturer's approved network interface, verify thermal rise with all channels active, and confirm whether auto-negotiation and link-status behavior satisfy the product requirements.
Inirekomenda
Telecom Access Equipment
The BCM5248XA4IFB can support multiport Fast Ethernet service interfaces in telecom access and network-edge equipment. Eight 10/100BASE-TX channels allow a line card or subscriber-facing module to offer multiple copper Ethernet ports while centralizing the physical layer. Deployment considerations include the product's specified operating limits, channel-to-channel isolation, electromagnetic-compatibility requirements, and the thermal environment inside a sealed or densely populated chassis. Use manufacturer reference layouts to control differential impedance and provide uninterrupted ground references beneath the transceiver and magnetics. For designs requiring fiber uplinks, pair each copper service port with a separate optical interface rather than assuming this transceiver supports media conversion internally.
Inirekomenda
Video Surveillance Concentrator
A video-surveillance concentrator can use the BCM5248XA4IFB when eight 10/100BASE-TX camera or access links meet the system's bandwidth and topology requirements. The multiport physical layer consolidates eight Fast Ethernet connections for a central controller or switch, which is useful for installations with multiple indoor cameras. Because each camera stream can consume significant network capacity, engineers should confirm that 100 Mb/s per link remains adequate and that upstream switching capacity does not become the bottleneck. Maintain controlled differential routing and separation from camera power supplies to reduce noise and ground offsets. Verify surge, ESD, operating-temperature, and grounding requirements against the installation environment before production release.
Inirekomenda
Robotics Control Network
The BCM5248XA4IFB is applicable to a robot controller or cell controller requiring eight Fast Ethernet connections for machine vision, programmable logic devices, sensors, and service equipment. Concentrating the physical layer can simplify wiring and improve channel consistency when the controller already handles Ethernet traffic through an external controller or switch. Verify the physical-layer electrical limits and temperature rating against robotics environments where vibration, temperature cycling, and cable transients are common. The PCB should provide solid ground-plane continuity, controlled impedance, short return paths, and suitably isolated magnetics or network interfaces. Confirm the device's behavior during link changes and power transitions, and design the system so an individual cable fault does not compromise unrelated channels.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for BCM5248XA4IFB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | BCM5248XA4IFBG |
|---|---|---|
| Brand | Broadcom | Broadcom |
| Port Count | 8 ports | 8 ports |
| Ethernet Standard | 10/100BASE-TX | 10/100BASE-TX |
| Data Rate | 10 Mb/s or 100 Mb/s | 10 Mb/s or 100 Mb/s |
| Product Category | Interface Transceiver IC | Interface Transceiver IC |
| Signal Functions | Signal driving and receiver stages | Signal driving and receiver stages |
| Application Category | Industrial networking | Industrial networking |
Pangunahing mga Pagkakaiba
- Eight Fast Ethernet physical layers in one device (kumpara saBCM5248XA4IFBG)
- Established 10/100BASE-TX positioning (kumpara saBCM5248XA4IFBG)
- Multiport integration for industrial networking (kumpara saBCM5248XA4IFBG)
Talaan ng Disenyo
Assign every differential channel from the transceiver to its corresponding Ethernet network interface with a continuous reference plane and manufacturer-recommended impedance. Keep the transmit and receive paths short, avoid stubs, and prevent unrelated clocks, switching nodes, and high-current supply paths from crossing beneath sensitive pairs. Because this is an eight-port device, review the entire routing plan as a channel-to-channel system rather than validating one route in isolation.
Calculate the worst-case transceiver and magnetics power demand with all eight channels operating before selecting supply components and copper area. Follow the manufacturer's recommended input and output capacitance, placement, and voltage tolerances. Use short, wide supply connections and a low-impedance ground reference, and verify local decoupling with an oscilloscope across the expected frequency range. Confirm startup, current limits, and thermal rise using the final load configuration.
Estimate the package temperature rise under maximum supported channel activity, ambient temperature, and supply conditions. Treat the result as an engineering estimate until checked against the manufacturer's thermal data and the final enclosure. Provide uninterrupted copper beneath the package or exposed pad as required, use all specified thermal-via patterns, and avoid placing heat-sensitive magnetics or regulators directly against the transceiver. Validate the assembled board across ambient and airflow limits.
Do not treat BCM5248XA4IFBG as a confirmed drop-in substitute without checking the package, pinout, temperature option, and ordering suffix. Likewise, do not infer 1000BASE-T capability from the eight-port Fast Ethernet description. Obtain the current manufacturer datasheet and package drawing, compare every limit with the original design, and review the magnetics interface, isolation spacing, ESD path, and test-point requirements before releasing production hardware.
Impormasyon ng Pagsunod sa Kautusan
The identified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These values must be confirmed from the current Broadcom product documentation or declaration.