BCM5248XA4IFB - 8-Port 10/100BASE-TX Transceiver | Broadcom
MPN: BCM5248XA4IFB ✓ Hoạt độngBCM5248XA4IFB Tóm tắt
An Ethernet transceiver is the physical-layer component between a network controller and an external RJ45 connector. It converts digital data into differential signaling for transmission and recovers incoming signals for the controller. A multiport 10/100BASE-TX transceiver reduces the number of individual physical-layer devices required in switches, routers, industrial controllers, and other multiport Ethernet systems. Unlike a 1000BASE-T device, its stated network standard is 10/100BASE-TX, so designers should verify that 100 Mb/s operation satisfies the target system.
The BCM5248XA4IFB's defining feature is its eight-port 10/100BASE-TX integration. This can simplify board partitioning by concentrating the transmit and receive functions for eight copper links in one package. The product is associated with industrial networking, serial communication, signal driving, and receiver-stage applications. The associated BCM5248XA4IFBG ordering code is described as an octal 10/100BASE-TX transceiver and is the closest matching part identified for comparison.
Use the manufacturer's device documentation and package drawings to define the exposed-pad layout, recommended magnetic-component interface, supply rails, signal-integrity constraints, and thermal conditions. These implementation details are critical in an eight-port design because each channel must meet Ethernet transmission criteria while the complete transceiver operates across multiple adjacent cables and magnetics. PCB stack-up, return paths, differential impedance, isolation gaps, and power distribution therefore warrant careful review.
Typical uses include industrial Ethernet switches, embedded network equipment, factory automation controllers, telecom access hardware, and other systems requiring several Fast Ethernet physical-layer channels. A multiport device is most beneficial when the design needs several standardized 10/100BASE-TX ports and board area is constrained. It is less suitable when a design requires 1000BASE-T, quad-port or octal-port features that can be implemented more simply with discrete transceivers.
Before releasing a layout, compare every electrical limit and pin assignment against the manufacturer datasheet, including absolute maximum ratings, recommended operating conditions, interface timing, and the thermal design of the exposed package area. Also verify the transformer or integrated-magnetics arrangement, transmit-side termination, receive-side network termination, and required test points. This page consolidates the identified product attributes, comparison points, sourcing guidance, and engineering considerations into a structured design reference.
Bộ thay thế dễ dàng lắp đặt cho BCM5248XA4IFB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếBCM5248XA4IFB Tỷ lệ tối đa & tính chất điện
| Product Type | Interface Transceiver IC |
| Ethernet Standard | 10/100BASE-TX |
| Number of Ports | 8 ports |
| Tốc độ dữ liệu | 10 Mb/s or 100 Mb/s |
| Application Category | Industrial networking |
| Signal Functions | Signal driving and receiver stages |
| Primary Interface | 10/100BASE-TX copper Ethernet |
| Manufacturer | Broadcom |
| Manufacturer Part Number | BCM5248XA4IFB |
Hướng dẫn cấu hình chân BCM5248XA4IFB standard
Cấu hình chân cho BCM5248XA4IFB (standard gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho BCM5248XA4IFB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
BCM5248XA4IFB phù hợp cho 6 Áp dụngs: Industrial Ethernet Switch, Factory Automation Gateway, Embedded Network Appliance, Telecom Access Equipment, Video Surveillance Concentrator, Robotics Control Network.
Industrial Ethernet Switch
The BCM5248XA4IFB is suitable for an industrial Ethernet switch that requires eight copper Fast Ethernet ports in a compact physical-layer design. Its eight 10/100BASE-TX channels replace separate single-port transceiver arrangements, helping standardize the board and reduce component count. Each channel must still be routed to its required Ethernet magnetic interface, and the design must preserve the specified differential impedance, return path, isolation spacing, and power distribution. The device is most attractive when all eight ports are needed, because unused-port requirements can make a lower-port-count solution simpler. Confirm supply-current limits, thermal performance, channel timing, and package details in the current Broadcom documentation before committing the PCB.
Được đề xuất
Factory Automation Gateway
A factory automation gateway can use the BCM5248XA4IFB to provide eight 10/100BASE-TX links for controllers, sensors, vision equipment, and service networks. Consolidating the Fast Ethernet physical layers simplifies connection planning and keeps channel implementations consistent across a multiport gateway. The 100 Mb/s ceiling must be checked against each machine or service connection, while copper cabling remains subject to the installation environment. Industrial qualification also requires checking the specified operating-temperature range, isolation, ESD exposure, power-loss behavior, and reliability requirements. Keep high-speed and power-supply routing away from sensitive receive paths, provide stable local decoupling, and verify every channel against the manufacturer reference layout.
Được đề xuất
Embedded Network Appliance
The BCM5248XA4IFB fits embedded network appliances that expose multiple Fast Ethernet service ports while using a host controller or switching silicon for packet processing. Its eight integrated 10/100BASE-TX channels provide a consistent physical-layer interface across the appliance and can reduce board area compared with discrete implementations. Because the device supports 10 Mb/s and 100 Mb/s rather than Gigabit Ethernet, it is best for management, control, sensor, or legacy-network ports. Designers should allocate space for eight channel magnetics or the manufacturer's approved network interface, verify thermal rise with all channels active, and confirm whether auto-negotiation and link-status behavior satisfy the product requirements.
Được đề xuất
Telecom Access Equipment
The BCM5248XA4IFB can support multiport Fast Ethernet service interfaces in telecom access and network-edge equipment. Eight 10/100BASE-TX channels allow a line card or subscriber-facing module to offer multiple copper Ethernet ports while centralizing the physical layer. Deployment considerations include the product's specified operating limits, channel-to-channel isolation, electromagnetic-compatibility requirements, and the thermal environment inside a sealed or densely populated chassis. Use manufacturer reference layouts to control differential impedance and provide uninterrupted ground references beneath the transceiver and magnetics. For designs requiring fiber uplinks, pair each copper service port with a separate optical interface rather than assuming this transceiver supports media conversion internally.
Được đề xuất
Video Surveillance Concentrator
A video-surveillance concentrator can use the BCM5248XA4IFB when eight 10/100BASE-TX camera or access links meet the system's bandwidth and topology requirements. The multiport physical layer consolidates eight Fast Ethernet connections for a central controller or switch, which is useful for installations with multiple indoor cameras. Because each camera stream can consume significant network capacity, engineers should confirm that 100 Mb/s per link remains adequate and that upstream switching capacity does not become the bottleneck. Maintain controlled differential routing and separation from camera power supplies to reduce noise and ground offsets. Verify surge, ESD, operating-temperature, and grounding requirements against the installation environment before production release.
Được đề xuất
Robotics Control Network
The BCM5248XA4IFB is applicable to a robot controller or cell controller requiring eight Fast Ethernet connections for machine vision, programmable logic devices, sensors, and service equipment. Concentrating the physical layer can simplify wiring and improve channel consistency when the controller already handles Ethernet traffic through an external controller or switch. Verify the physical-layer electrical limits and temperature rating against robotics environments where vibration, temperature cycling, and cable transients are common. The PCB should provide solid ground-plane continuity, controlled impedance, short return paths, and suitably isolated magnetics or network interfaces. Confirm the device's behavior during link changes and power transitions, and design the system so an individual cable fault does not compromise unrelated channels.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho BCM5248XA4IFB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | BCM5248XA4IFBG |
|---|---|---|
| Brand | Broadcom | Broadcom |
| Port Count | 8 ports | 8 ports |
| Ethernet Standard | 10/100BASE-TX | 10/100BASE-TX |
| Data Rate | 10 Mb/s or 100 Mb/s | 10 Mb/s or 100 Mb/s |
| Product Category | Interface Transceiver IC | Interface Transceiver IC |
| Signal Functions | Signal driving and receiver stages | Signal driving and receiver stages |
| Application Category | Industrial networking | Industrial networking |
Bảo phân biệt quan trọng
- Eight Fast Ethernet physical layers in one device (vsBCM5248XA4IFBG)
- Established 10/100BASE-TX positioning (vsBCM5248XA4IFBG)
- Multiport integration for industrial networking (vsBCM5248XA4IFBG)
Ghi chú thiết kế
Assign every differential channel from the transceiver to its corresponding Ethernet network interface with a continuous reference plane and manufacturer-recommended impedance. Keep the transmit and receive paths short, avoid stubs, and prevent unrelated clocks, switching nodes, and high-current supply paths from crossing beneath sensitive pairs. Because this is an eight-port device, review the entire routing plan as a channel-to-channel system rather than validating one route in isolation.
Calculate the worst-case transceiver and magnetics power demand with all eight channels operating before selecting supply components and copper area. Follow the manufacturer's recommended input and output capacitance, placement, and voltage tolerances. Use short, wide supply connections and a low-impedance ground reference, and verify local decoupling with an oscilloscope across the expected frequency range. Confirm startup, current limits, and thermal rise using the final load configuration.
Estimate the package temperature rise under maximum supported channel activity, ambient temperature, and supply conditions. Treat the result as an engineering estimate until checked against the manufacturer's thermal data and the final enclosure. Provide uninterrupted copper beneath the package or exposed pad as required, use all specified thermal-via patterns, and avoid placing heat-sensitive magnetics or regulators directly against the transceiver. Validate the assembled board across ambient and airflow limits.
Do not treat BCM5248XA4IFBG as a confirmed drop-in substitute without checking the package, pinout, temperature option, and ordering suffix. Likewise, do not infer 1000BASE-T capability from the eight-port Fast Ethernet description. Obtain the current manufacturer datasheet and package drawing, compare every limit with the original design, and review the magnetics interface, isolation spacing, ESD path, and test-point requirements before releasing production hardware.
Thông tin tuân thủ
The identified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These values must be confirmed from the current Broadcom product documentation or declaration.