Broadcom

BCM5248XA4IFB - 8-Port 10/100BASE-TX Transceiver | Broadcom

MPN: BCM5248XA4IFB ✓ فعال
حداقل سفارش: 1 |

BCM5248XA4IFB نمای کلی

The Broadcom BCM5248XA4IFB is an eight-port 10/100BASE-TX Fast Ethernet interface transceiver designed for industrial networking equipment that requires multiple copper Ethernet ports in one device. It integrates eight 10/100BASE-TX channels and belongs to the interface transceiver IC class, where physical-layer drivers and receivers connect digital network controllers to twisted-pair cabling. The device is supplied by Broadcom and is identified by the manufacturer ordering code BCM5248XA4IFB.

An Ethernet transceiver is the physical-layer component between a network controller and an external RJ45 connector. It converts digital data into differential signaling for transmission and recovers incoming signals for the controller. A multiport 10/100BASE-TX transceiver reduces the number of individual physical-layer devices required in switches, routers, industrial controllers, and other multiport Ethernet systems. Unlike a 1000BASE-T device, its stated network standard is 10/100BASE-TX, so designers should verify that 100 Mb/s operation satisfies the target system.

The BCM5248XA4IFB's defining feature is its eight-port 10/100BASE-TX integration. This can simplify board partitioning by concentrating the transmit and receive functions for eight copper links in one package. The product is associated with industrial networking, serial communication, signal driving, and receiver-stage applications. The associated BCM5248XA4IFBG ordering code is described as an octal 10/100BASE-TX transceiver and is the closest matching part identified for comparison.

Use the manufacturer's device documentation and package drawings to define the exposed-pad layout, recommended magnetic-component interface, supply rails, signal-integrity constraints, and thermal conditions. These implementation details are critical in an eight-port design because each channel must meet Ethernet transmission criteria while the complete transceiver operates across multiple adjacent cables and magnetics. PCB stack-up, return paths, differential impedance, isolation gaps, and power distribution therefore warrant careful review.

Typical uses include industrial Ethernet switches, embedded network equipment, factory automation controllers, telecom access hardware, and other systems requiring several Fast Ethernet physical-layer channels. A multiport device is most beneficial when the design needs several standardized 10/100BASE-TX ports and board area is constrained. It is less suitable when a design requires 1000BASE-T, quad-port or octal-port features that can be implemented more simply with discrete transceivers.

Before releasing a layout, compare every electrical limit and pin assignment against the manufacturer datasheet, including absolute maximum ratings, recommended operating conditions, interface timing, and the thermal design of the exposed package area. Also verify the transformer or integrated-magnetics arrangement, transmit-side termination, receive-side network termination, and required test points. This page consolidates the identified product attributes, comparison points, sourcing guidance, and engineering considerations into a structured design reference.

جایگزین‌های drop-in برای BCM5248XA4IFB — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

BCM5248XA4IFB حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Interface Transceiver IC
Ethernet Standard 10/100BASE-TX
Number of Ports 8 ports
نرخ داده 10 Mb/s or 100 Mb/s
Application Category Industrial networking
Signal Functions Signal driving and receiver stages
Primary Interface 10/100BASE-TX copper Ethernet
Manufacturer Broadcom
Manufacturer Part Number BCM5248XA4IFB

راهنمای پیکربندی پین BCM5248XA4IFB standard

پیکربندی پین برای BCM5248XA4IFB (پکیج standard). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج standard برای BCM5248XA4IFB

داده پین‌آوت تفصیلی موجود نیست برای BCM5248XA4IFB.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

BCM5248XA4IFB مناسب است برای 6 کاربردs: Industrial Ethernet Switch, Factory Automation Gateway, Embedded Network Appliance, Telecom Access Equipment, Video Surveillance Concentrator, Robotics Control Network.

🏭

Industrial Ethernet Switch

The BCM5248XA4IFB is suitable for an industrial Ethernet switch that requires eight copper Fast Ethernet ports in a compact physical-layer design. Its eight 10/100BASE-TX channels replace separate single-port transceiver arrangements, helping standardize the board and reduce component count. Each channel must still be routed to its required Ethernet magnetic interface, and the design must preserve the specified differential impedance, return path, isolation spacing, and power distribution. The device is most attractive when all eight ports are needed, because unused-port requirements can make a lower-port-count solution simpler. Confirm supply-current limits, thermal performance, channel timing, and package details in the current Broadcom documentation before committing the PCB.

⚡

Factory Automation Gateway

A factory automation gateway can use the BCM5248XA4IFB to provide eight 10/100BASE-TX links for controllers, sensors, vision equipment, and service networks. Consolidating the Fast Ethernet physical layers simplifies connection planning and keeps channel implementations consistent across a multiport gateway. The 100 Mb/s ceiling must be checked against each machine or service connection, while copper cabling remains subject to the installation environment. Industrial qualification also requires checking the specified operating-temperature range, isolation, ESD exposure, power-loss behavior, and reliability requirements. Keep high-speed and power-supply routing away from sensitive receive paths, provide stable local decoupling, and verify every channel against the manufacturer reference layout.

🖥️

Embedded Network Appliance

The BCM5248XA4IFB fits embedded network appliances that expose multiple Fast Ethernet service ports while using a host controller or switching silicon for packet processing. Its eight integrated 10/100BASE-TX channels provide a consistent physical-layer interface across the appliance and can reduce board area compared with discrete implementations. Because the device supports 10 Mb/s and 100 Mb/s rather than Gigabit Ethernet, it is best for management, control, sensor, or legacy-network ports. Designers should allocate space for eight channel magnetics or the manufacturer's approved network interface, verify thermal rise with all channels active, and confirm whether auto-negotiation and link-status behavior satisfy the product requirements.

🌐

Telecom Access Equipment

The BCM5248XA4IFB can support multiport Fast Ethernet service interfaces in telecom access and network-edge equipment. Eight 10/100BASE-TX channels allow a line card or subscriber-facing module to offer multiple copper Ethernet ports while centralizing the physical layer. Deployment considerations include the product's specified operating limits, channel-to-channel isolation, electromagnetic-compatibility requirements, and the thermal environment inside a sealed or densely populated chassis. Use manufacturer reference layouts to control differential impedance and provide uninterrupted ground references beneath the transceiver and magnetics. For designs requiring fiber uplinks, pair each copper service port with a separate optical interface rather than assuming this transceiver supports media conversion internally.

🎥

Video Surveillance Concentrator

A video-surveillance concentrator can use the BCM5248XA4IFB when eight 10/100BASE-TX camera or access links meet the system's bandwidth and topology requirements. The multiport physical layer consolidates eight Fast Ethernet connections for a central controller or switch, which is useful for installations with multiple indoor cameras. Because each camera stream can consume significant network capacity, engineers should confirm that 100 Mb/s per link remains adequate and that upstream switching capacity does not become the bottleneck. Maintain controlled differential routing and separation from camera power supplies to reduce noise and ground offsets. Verify surge, ESD, operating-temperature, and grounding requirements against the installation environment before production release.

🔧

Robotics Control Network

The BCM5248XA4IFB is applicable to a robot controller or cell controller requiring eight Fast Ethernet connections for machine vision, programmable logic devices, sensors, and service equipment. Concentrating the physical layer can simplify wiring and improve channel consistency when the controller already handles Ethernet traffic through an external controller or switch. Verify the physical-layer electrical limits and temperature rating against robotics environments where vibration, temperature cycling, and cable transients are common. The PCB should provide solid ground-plane continuity, controlled impedance, short return paths, and suitably isolated magnetics or network interfaces. Confirm the device's behavior during link changes and power transitions, and design the system so an individual cable fault does not compromise unrelated channels.

What is BCM5248XA4IFB?
The BCM5248XA4IFB is a Broadcom eight-port 10/100BASE-TX Fast Ethernet interface transceiver for industrial networking equipment. It performs the physical-layer signal-driving and receiver functions needed to connect an Ethernet controller or switching system to copper twisted-pair networks. The Broadcom product information identifies it as an interface transceiver IC with eight 10/100BASE-TX channels.
How many Ethernet ports does BCM5248XA4IFB support?
The BCM5248XA4IFB supports eight 10/100BASE-TX Ethernet ports in one multiport transceiver. This integration can reduce the component count and board partitioning required for an eight-port Fast Ethernet design. According to the Broadcom device listing, the device is categorized for drivers, receivers, and transceivers used in industrial networking systems.
What Ethernet speed does BCM5248XA4IFB support?
The BCM5248XA4IFB supports 10 Mb/s and 100 Mb/s operation over 10/100BASE-TX copper links. It is therefore suited to Fast Ethernet rather than Gigabit Ethernet designs. The manufacturer listing specifically identifies the device as an octal 10/100BASE-TX transceiver and does not identify 1000BASE-T operation.
Where can I download the BCM5248XA4IFB datasheet PDF?
The BCM5248XA4IFB datasheet can be reached through the product's datasheet directory entry and through the linked distributor product pages on this page. Before releasing a PCB design, obtain the current Broadcom datasheet and package drawing from Broadcom or an authorized technical source. Confirm the revision because package dimensions, electrical limits, and recommended application circuits govern layout.
Where can I find the BCM5248XA4IFB pinout?
The BCM5248XA4IFB pin assignment must be taken from the manufacturer datasheet and package drawing because the public product excerpts do not reproduce a complete numbered pin table. Use the pin-description table to map supply rails, channel transmit and receive signals, control functions, ground connections, and any exposed thermal pad. Do not infer pin locations from a generic package drawing.
What applications use BCM5248XA4IFB?
The BCM5248XA4IFB is intended for industrial networking equipment requiring multiple Fast Ethernet physical-layer channels. Typical uses include industrial Ethernet switches, embedded controllers, access equipment, and factory-automation systems with eight copper ports. Its integration is most useful when a design needs several standardized 10/100BASE-TX interfaces and reduction of discrete transceiver count.
Is BCM5248XA4IFB suitable for industrial networking?
The BCM5248XA4IFB is specifically identified for industrial networking and provides eight integrated 10/100BASE-TX channels. Suitability for a particular industrial product still depends on its specified operating-temperature range, power ratings, isolation requirements, EMC expectations, and reliability program. Those limits should be checked in the current manufacturer datasheet before qualification.
How does BCM5248XA4IFB compare with BCM5248XA4IFBG?
The BCM5248XA4IFB and BCM5248XA4IFBG are closely associated Broadcom eight-port 10/100BASE-TX transceiver order codes. The available manufacturer-oriented descriptions identify both as octal Fast Ethernet transceivers, while their ordering suffixes indicate different catalog or packing configurations. Confirm the package, temperature, and packing fields in the manufacturer ordering guide before treating them as interchangeable.
What is the best drop-in replacement for BCM5248XA4IFB?
The BCM5248XA4IFB should be replaced only with a device confirmed to use the identical package, pin assignment, channel count, Ethernet standard, electrical limits, and ordering option. The associated BCM5248XA4IFBG code is the nearest identified match, but its package and suffix details must be verified before use. Do not substitute it solely because both descriptions mention an octal 10/100BASE-TX transceiver.
Can BCM5248XA4IFBG replace BCM5248XA4IFB?
BCM5248XA4IFBG may be a pin-compatible candidate for BCM5248XA4IFB, but the available information does not establish complete drop-in equivalence. Both are associated with Broadcom eight-port 10/100BASE-TX transceivers, yet the suffix difference may encode packaging, temperature, or another ordering attribute. Verify the exact package, pinout, exposed-pad connection, and ordering information before substitution.
When should I choose BCM5248XA4IFB over discrete Ethernet transceivers?
Choose BCM5248XA4IFB when the design requires eight 10/100BASE-TX channels and reducing discrete physical-layer component count is valuable. A multiport transceiver can simplify board partitioning and standardize the copper-Ethernet interfaces, but its package, thermal requirements, channel performance, and magnetics interface must meet the system constraints. It is less advantageous when only one or two ports are required.
Is BCM5248XA4IFB in stock?
Current stock status changes by market and should be requested through the Request a Quote form on this page. The product has identified distributor and catalog listings, but their snippets do not provide a fixed current inventory quantity. A quotation response should confirm the exact BCM5248XA4IFB suffix, package option, quantity, lead time, and delivery condition.
Where can I buy BCM5248XA4IFB online?
Use the Request a Quote form on this page to request BCM5248XA4IFB pricing, stock, lead time, and order handling. The form helps ensure that the quotation corresponds to the exact Broadcom ordering code and intended package or packing option. Lifecycle and availability should be reconfirmed at the time of each production order, particularly for a multiport transceiver used in industrial equipment.
What is the price of BCM5248XA4IFB?
Pricing for BCM5248XA4IFB depends on quantity, package option, condition, and current market availability. Request a quotation through the Request a Quote form on this page for the exact ordering code and volume required by your build. The visible product page renders current structured pricing when a qualifying quantity-break listing is available.
What is the lead time for BCM5248XA4IFB?
The current lead time for BCM5248XA4IFB should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production schedule, package selection, and component availability. Provide the forecast quantities and required delivery dates when requesting the quotation so that manufacturing planning reflects the actual supply position.
What are the key specifications of BCM5248XA4IFB that engineers should know?
The key established specifications of BCM5248XA4IFB are eight integrated ports, 10/100BASE-TX operation, 10 Mb/s and 100 Mb/s data rates, interface-transceiver functionality, and an industrial-networking role. Broadcom identifies the device as providing signal-driving and receiver-stage functions. Package dimensions, pin count, supply limits, timing, and temperature ratings must be taken from the manufacturer datasheet before schematic capture.

داده‌های مرجع مهندسی برای BCM5248XA4IFB — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose BCM5248XA4IFB when an industrial Ethernet product needs eight copper ports operating at 10 Mb/s or 100 Mb/s and consolidating the physical layer simplifies PCB partitioning. Confirm that all eight channels are justified; a lower-port-count device may be simpler when only one or two links are needed. BCM5248XA4IFBG is the closest identified ordering code, but it is not automatically a drop-in replacement because the suffix may identify a different package, temperature, or packing option. Review the manufacturer ordering guide, pinout, package drawing, electrical limits, and magnetics interface before approving it. For designs requiring Gigabit Ethernet, choose a 1000BASE-T transceiver instead. For compact systems with very few Ethernet ports, a single-channel device can reduce unused area, power, and validation effort. The BCM5248XA4IFB is therefore strongest where multiport Fast Ethernet integration, industrial-networking relevance, and an established Broadcom physical-layer implementation outweigh the need for a single-port or Gigabit solution.

مقایسه با جایگزین‌ها

پارامتر این محصول BCM5248XA4IFBG
Brand Broadcom Broadcom
Port Count 8 ports 8 ports
Ethernet Standard 10/100BASE-TX 10/100BASE-TX
Data Rate 10 Mb/s or 100 Mb/s 10 Mb/s or 100 Mb/s
Product Category Interface Transceiver IC Interface Transceiver IC
Signal Functions Signal driving and receiver stages Signal driving and receiver stages
Application Category Industrial networking Industrial networking

تفاوت‌های کلیدی

  • Eight Fast Ethernet physical layers in one device (در مقابلBCM5248XA4IFBG)
  • Established 10/100BASE-TX positioning (در مقابلBCM5248XA4IFBG)
  • Multiport integration for industrial networking (در مقابلBCM5248XA4IFBG)

یادداشت‌های طراحی

Assign every differential channel from the transceiver to its corresponding Ethernet network interface with a continuous reference plane and manufacturer-recommended impedance. Keep the transmit and receive paths short, avoid stubs, and prevent unrelated clocks, switching nodes, and high-current supply paths from crossing beneath sensitive pairs. Because this is an eight-port device, review the entire routing plan as a channel-to-channel system rather than validating one route in isolation.

Calculate the worst-case transceiver and magnetics power demand with all eight channels operating before selecting supply components and copper area. Follow the manufacturer's recommended input and output capacitance, placement, and voltage tolerances. Use short, wide supply connections and a low-impedance ground reference, and verify local decoupling with an oscilloscope across the expected frequency range. Confirm startup, current limits, and thermal rise using the final load configuration.

Estimate the package temperature rise under maximum supported channel activity, ambient temperature, and supply conditions. Treat the result as an engineering estimate until checked against the manufacturer's thermal data and the final enclosure. Provide uninterrupted copper beneath the package or exposed pad as required, use all specified thermal-via patterns, and avoid placing heat-sensitive magnetics or regulators directly against the transceiver. Validate the assembled board across ambient and airflow limits.

Do not treat BCM5248XA4IFBG as a confirmed drop-in substitute without checking the package, pinout, temperature option, and ordering suffix. Likewise, do not infer 1000BASE-T capability from the eight-port Fast Ethernet description. Obtain the current manufacturer datasheet and package drawing, compare every limit with the original design, and review the magnetics interface, isolation spacing, ESD path, and test-point requirements before releasing production hardware.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The identified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These values must be confirmed from the current Broadcom product documentation or declaration.

جستجوهای مرتبط

BCM5248XA4IFB datasheet BCM5248XA4IFB datasheet pdf BCM5248XA4IFB pinout Broadcom BCM5248XA4IFB BCM5248XA4IFB equivalent BCM5248XA4IFB replacement BCM5248XA4IFB cross reference BCM5248XA4IFB vs BCM5248XA4IFBG BCM5248XA4IFB 8 port transceiver BCM5248XA4IFB 10/100BASE-TX BCM5248XA4IFB industrial networking BCM5248XA4IFB price BCM5248XA4IFB stock BCM5248XA4IFB footprint

قطعات و اصطلاحات مرتبط

Broadcom BCM5248XA4IFB BCM5248XA4IFBG 10/100BASE-TX Fast Ethernet Ethernet transceiver interface transceiver IC physical-layer IC multiport transceiver signal driver receiver stage industrial networking copper Ethernet twisted-pair cable differential signaling Ethernet magnetic interface RJ45 10 Mb/s 100 Mb/s eight-port transceiver LAN switching PCB signal integrity differential impedance
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ